Resume - Project engineering as well as civil structural design experience in the oil and...

Misco Jobs

Resume #65495

CONTACT INFORMATION:
View contact information...

Bachelor of Engineering (Civil), Swinburne Institute of Technology, Melbourne, Australia, 1987

Competent in AutoCAD, Microsoft Word, Microsoft Project, Excel Programming experience in Basic and Fortran Familiar with C-Beam, Microstrand 3D, Stress and Superstress - structural analysis packages

KEY EXPERIENCE: A registered Professional Engineer with the Board of Engineers, Malaysia. Mr Leong has an overall of 20 years experience in engineering design, construction and project management in engineering and the oil andgas industry.

AREAS OF PARTICULAR EXPERTISE PROFESSIONAL EXPERIENCE

March 1998-Present: Ranhill Worley Sdn Bhd;
Project and Civil / Structural Engineer
February 1998-Present
* B11 Redevelopment - Project engineer for the conceptual and detailed design of B11K-A compression platform with tie-into existing production platform B11P-A for Sarawak Shell Berhad. This involved design coordination with the client and engineering disciplines, producing design reports, weekly and monthly reporting and engineering liaison with the client and third party consultants. The scope included follow on engineering work during construction phase and vendor data review and incorporation.
* Bumi, Bulan, Suraya Gas Field Development Project - Project engineer for the detailed design of three (3)wellhead platforms (BMA, BLA & SYA) and a gas compressor module (M3) plus tie-ins to an existing platform in CKR for Carigali-Hess Operating Company. This involved design coordination with the client and engineering disciplines, producing design reports, weekly and monthly reporting and engineering liaison with the client and third party consultants. The scope included follow on engineering work during construction phase and vendor data review and incorporation.
* Baram Pipeline Replacement Project - Project Manager for detailed design of pipeline replacement work for the Baram field involving platforms BAP-B, BADP-G, BAP-AA and MCOT to which to replace the existing 10" pipeline between BAP-B to BAP-AA and BADP-G to BAP-AA with a new 10" pipelines and to install a new 24" pipeline from BAP-AA to MCOT. This involved all associated modification works on the platforms and on MCOT. Work also involved coordinating work between the various disciplines and with subsidiary company in Perth, Australia for the CDBM report, organising review sessions with the Client and organising site visit works by disciplines to the platforms. Was also involved in updating weekly reporting, planning and liaison with the Client.
* Design Services for F13E/SC3&4 Platforms and Pipelines Project - This project is both conceptual and detail design engineering for two wellhead drilling platforms, F13E(SC)DR-A and SCDR-A, including the tie-in platforms for the E11 Hub. Project engineering work involved in the co-ordination of conceptual and detailed design engineering between all disciplines for the platforms and pipelines within RW as well as with the Client. Was also involved in updating the weekly and monthly reports, liaison with third party sub-consultants, co-ordination with the Client's procurement on the organisation of the fabricator's bid packages.
* Baram COTP Project - Project manager for the detailed design of the upgrading of existing COTPs for BAP-B, BAP-AA and BAP-A platforms. This involved liaison with the Client, design coordination with the various disciplines, organising review sessions with the Client, organising site visits by disciplines to the platforms, planning and updating weekly reporting,study of possible scenarios and presentation to theClient on study findings.
* Salman EPC-2 Project - This project is detail design engineering and procurement engineering for topsides for new platforms and bridges. There are a total of 7 new platforms inclusive of riser manifold platform, gas processing platform, living quarters, gas lift platform, flare platform, 2 wellhead platforms andmodification to an existing wellhead platform aswell as tie-ins to existing facilities. Project engineer involved in the co-ordination ofdetailed design engineering between all disciplines for the wellhead platforms (new platforms 2SK-B & 2SK-C and existing 2SK-A platform). Was also involved in updating the weekly and monthly reports of the project as well as maintaining and updating the Material Requisitions Status Report and liaison with the Client to obtain the latest bid documents from vendors in order forthe discipline engineers to come up with technical clarifications and technical bid evaluation for the Client to decide on selection of vendors to procure equipment and materials for all the platforms. Was also involved in preparation of technical queries and maintaining a technical queries log as well as preparation of change requests for the project.
* F13W Facilities Conceptual Design - Project engineer involved in the co-ordination of engineering works between all the disciplines in the conceptual design of a new drilling riser platform(F13WDR-A) and an extension module to an existing compression platform (E11K-A) including detailed design of 3 major pipelines. Was also responsible for the weekly reporting, expediting and monitoring of the engineering work, compilation of all relevant documents for the various packages, monitoring the deliverables progress and preparation of issue for bid documentation.
* Fairley Baram Evacuation Project Project engineer involved in co-ordination between all the disciplines in the detailed engineering design involving various engineering disciplines for the Fairley Baram Evacuation Project. This project requires 2 new pipelines to be connected from anexisting production platform (FBPP-1) in the Fairley oil field in Brunei to another production platform(BAP-AA) in Baram in the Malaysian waters off Miri. Was responsible for the expediting and monitoring of engineering work. Was also responsible for the compilation of all relevant documents, monitoring the deliverables progress and preparation of issuefor bid documentation.
* Baram Bokor Gas Handling Facility Project - Project engineer for the Baram Bokor Gas Handling Facility Project. This project involved designing 2 new platforms, i.e. a compression platform, BAKP-B, and a production platform, BAP-B, to tie into the existing wellhead drilling, compression and production platforms in the Baram field as well as to the Baram South field. Was responsible for the co-ordination between various engineering disciplines, expediting and monitoring of the work. Was also responsible for the weekly reporting, compilation of all relevant documents, monitoring the deliverables progress and preparation of issue for bid documentation.
* Baram South Additional 4 Conductors on BADP-B - Project engineer for the Baram South Additional 4C onductors on BADP-B offshore detailed design project. This project requires installation of 4 newconductors to an existing wellhead drilling platform in the Baram oil field in the Malaysian waters off Miri. Was responsible for the co-ordination between various engineering disciplines, expediting and monitoring of the work. Was also responsible for the weekly reporting, compilation of all relevant documents, monitoring the deliverables progress and preparation of issue for bid documentation.
* KUB Pulau Indah LPG Bulk Storage and Filling Plant, Pulau Indah
* Keloil LPG Bulk Storage and Bottling Plant, KotaBharu
Project Engineer for the Civil & Structural portion of the works including preparation of submission drawings, tender documents and calculations to approving authorities including supervising and management of the construction works.
* Malaysian LNG Tiga project in Bintulu, Sarawak for the BOG Compressor and Jetty areas - Project Engineer looking into the 3D modelling, design and 2D deliverable drawings. This includes preparation of weekly and monthly reports, monitoring and expediting the works. The work involved very tight control over the design changes decided by the Client in Japan. Was also sent to Yokohama, Japan for the model review together with the owner's representative.

September 1994-January 1997: BHP Engineering (Malaysia) Sdn Bhd
Senior Civil/Structural Engineer/Project Engineer
* Guangzhou Rollforming Factory Project - Design Co-ordinator / Project Engineer involved in co-ordinating with the structural steel fabricator and cladding supplier on technical requirements. Was responsible for the preparation of tender and contract documentationfor the structural steel and cladding supplies andinstallation.
* CSR Guangdong Glasswool Insulation Factory - ProjectProject Engineer for CSR Guangdong GlasswoolInsulation FactoryProject in China. Was responsible for the management of engineeringand architectural requirements, co-ordinating withthe steel fabricator and cladding supplier. Preparation of tender and contract documentation of steel supply. Site supervision of the civil and structural construction works for the factory in China.
* Hanoi Rollforming Factory Project - Project Engineer for Hanoi Rollforming Factory. Was responsible for the management of works and the preparation of tender and contract documentation for both C&S and M&E.
* CSR Autoclave Lightweight Concrete Factory - Project Manager for CSR Autoclave Lightweight Concrete Factory Extension in Senawang Industrial Estate, Seremban. Was responsible for the management and co-ordination of engineering, preparation of tender and contract documentation for all the construction, packages, contractadministration, managementof construction contractor on site, management of supply fabricators and vendors, liasing work with client and construction planning and scheduling.

April 1994-September 1994: Oil-Line Engineering Associates Sdn Bhd
Civil Engineer
* Design engineer for the design of waste water treatment plant structures(pump sumps,equalisation tanks, aeration tanks, storage building and hot and cold sump for Fluor Daniel (M) Sdn Bhd
* Design engineer in the structural design of substations, transformers and pump foundations, pump station, CPI oil separator and oil skimming pit for Petronas Kerteh Refinery. Was also involved in the design of civil works for the offsite tankage areas

September 1991-April 1994: Engineering and Environmental Consultants Sdn Bhd
Project Manager for a 166 acres housing project for the Ministry of Defence Malaysia. This project involved 12 packages. I was responsible for the design of earth retaining structures using R.C. cantilever retaining walls and Geogrid wall. Was also involved in co-ordinating with proprietary wall suppliers like R.E. wall & Crib wall in the supply and installation, re-routing and design of sewerage systems involving co-ordinating with Hi-Kleen sewerage treatment suppliers to incorporate their proprietary systems into the sewer systems. I was responsible in the preparation of tender and contract documentation, tender evaluation reports for the tenders and co-ordinating with the Ministry of Defence on the project requirements. I was also responsible for the site co-ordination and supervision on a required basis.

September 1991-September 1991: Syed Muhammad, Hooi and Binnie Sdn Bhd
Structural Design Engineer responsible for thefollowing:
* Design of the spillway and stilling basin of Lingiu dam in Johor for the Johor Government
* Design of an administration building, sludgewaterpumphouse and water retaining structures for theSungai Selangor Water Supply Scheme
* Detailed a footbridge to the drawoff tower and a clear water tank for the Kota Kinabalu WaterSupply Scheme
* Designed the clear water tank for the KotaKinabalu Water Supply Scheme
* Design extension of the drawoff tower and spillway for the Sungai Lebam dam in Johor

July 1989-August 1990: Jurutera Perunding Daya Sdn Bhd
Civil/Structural Engineer
* Designed and co-ordinated works for a factory with turnkey contractor and government authorities for M/S S.M.K. Electronics (M) Sdn Bhd in Beranang Industrial Estate in Hulu Langat. The structure is of steel roofing and reinforced concrete from the column downwards. References in design of BS8110, BS449& BS5950.
* Designed a motorcycle bridge over the Federal Highway atthe North Klang Straits Bypass Interchange to BS 5400 for PLUS. (Part of the FederalHighway Route II Expansion Project).
* Designed the bridge extension over Sg Renggam atthe Sg Renggam Interchange along the Federal Highway Route II Expansion Project).
* Designed the pedestrian bridge over the FederalHighway near Sg Rasa to BS 5400 for PLUS. (Part ofthe Federal Highway Route II Expansion Project).
* Designed the drainage and co-ordination works for the Cheras Perdana housing project for M/S GreenMountain Holdings.
* Supervised the civil works of the oil and gas pipeline installation project from the Esso refinery to their jetty for Esso Malaysia in Port Dickson. Was based on site for 2 months.
* Design of a steel structure factory to BS 449 for M/S Yong Sheng Heat Treatment Plant in Jalan Meru, Klang.

June 2003 October 1987-July 1989: LP Consultants Sdn Bhd
Graduate Engineer
* In charge of a computer department to assist in the production of engineering drawings using AutoCAD
* Design and supervision of a sub-soil drainage system for the bank premises at Pekarangan Tun Ismail for the Standard Chartered Bank.
* Designed a block of shop lots and flats for M/S Kemajuan Pakatan Sdn Bhd at the 3rd mile, Old Klang Road with references to BS8100.
* Prepared tender documentation for the factory extension building works for M/S Aesculap surgical Instruments Sdn Bhd in Bayan Lepas Free Trade Zone, Penang.

SUMMARY OF MAJOR EXPERIENCE
All designs were computer aided:* Project management / engineering of engineering work of offshore oil and gas facilities.* Construction management* Contract administration* tender evaluation reports and material requisition status reporting * Design of water retaining structures * Design of bridges (highway, motorcycle & pedestrian bridges) * Design of steel structures for industrial plants(welded & bolted connections) * Design of R.C. structures * Design of civil works (design of drainage system, sewerage systems, earthworks platforming, oily sewer system & petroleum offsite tankage area) * Prepared tender and contract documentation

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6635)

Go to Search Parameters...

Brief Description

Nearly 20 experiences as Enterprise level CAD/CAM/CAE software consultant.

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

B.sc in petroleum engineering from tulsa university ,oklahoma,U.S.A.,1985. work experience 23 years

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

Experienced with trouble shooting all aspects ships electrical installation and automation, DP Experience

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

painting and insulation supervisor - oil and gas industries

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out