Resume - 17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas i...

Misco Jobs

Resume #65531

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE
Damit WorleyParsons Engineering Sdn Bhd, Brunei Darussalam
1994 - Present
- Piping Designer

Client: Brunei Shell Petroleum Co Sdn Bhd

MAJOR PROJECTS:
* Tungku Gas Plant project (Onshore) - conceptual and detailed design.
- Modification of Pipeline Receiver/Launcher. Work includes installations of 2 new trains of Exchangers, Vessels & Pumps, Electrical Heater Condensate Tank and Loading to Tankers.

* Ampa-Fairley Rationalisation project (Offshore) - conceptual and detailed design.
- Modification of 3 complexes and 15 processing platforms. Work includes installations of new LP Compressors, Surge Vessels & Pumps, Flash Gas Compressor, LP Separator and Flares.
* PIMS West Pigging Facilities Upgrade (Offshore) - Conceptual Study and Detailed Design
- Installation of new Launchers and Receivers, upgrading the Pigging facilities on 18 platforms including replacements of risers. 3D modelling of piping and barrels using PDMS.

* BSP East/West Pipeline Replacement Project (Offshore) - Conceptual Study and Detailed Design
- Installation of 18 new pipelines including Launchers and Receivers on 36 platforms. 3D modelling of piping and barrels using PDMS.

* BUGAN New Drilling Platform (Offshore) - Detailed Design
- Involved in the designing of a 6-legged Drilling platform using PDMS – modelling of the piping layout and 2D drafting.

* Magpie Upgrade Facilities (Offshore) - Detailed Design
- Involved in the piping PDMS 2D drafting on MGPP-1 platform of the Magpie-1 Complex.
- Involved in the piping PDMS 3D modelling and MDS pipe support designing and modelling on MGCP-1 platform of the Magpie-1 Complex.
- Installations of Corrosion Inhibitor Injection skids on offshore drilling platforms MGDP02 & MGDP03 to accommodate requirement from the new Mampak field.

ROUTINE ENGINEERING PROJECTS:
* Installation of Corrosion Inhibitor Injection Skid on offshore drilling platforms AMDP2, FAWJ06 and GADP01.
* Installation of Corrosion Inhibitor Injection Skid on offshore drilling platform (AMDP30) – including replacing existing pumps with electrically driven pumps.
* Modular Safety Upgrade (MSU), Well Tie-In (WTI) and CPRA – Safety modifications and Install New Wellhead on offshore drilling platforms in various field locations (Ampa field / Fairley field / Champion field and Darat facilities).
* Bulk Separator Metering Improvement and FTHP Transmitter replacement on offshore platforms of AMPP1, AMRP4, AMPP12 & AMPP17.
* Instrument Gas Upgrade for West Outstations on platforms AMCX-01, AMPP-4, AMPP-12 & AMPP-17 (Installation of air compressor and replacing instrument air system)
* West Test Separator Metering Upgrade AMDP06 offshore platforms (Upgrade and replace existing Test Separator and installing new Coriolis Meter)
* Magpie Upgrade Facilities – installations of Corrosion Inhibitor Injection skids on offshore drilling platforms MGDP02 & MGDP03 to accommodate requirement from the new Mampak field
* Routine Offshore Maintenance Engineering (ROME) project – like- to-like replacement and design work on various offshore platforms

Client: Brunei Liquefied Natural Gas Sdn Bhd (BLNG Sdn Bhd)

* Drier and Sulfinol Debottlenecking project – (Train 1 to Train 5). - Conceptual Study and Detailed Design
- Dryer replacement, Installing new Gas Exchanger and C3 Cooler replacement Sulfinol Cooler Replacement, Recertification of Lean/Rich Sulfinol, Regeneration Tray Replacement and Sulfinol Flash vessel Replacement
* Train 1 Priority Valve Replacement project - Detailed Design
- Installations of various types of new valves at Train 1

Responsibilities as a Piping Designer include:
* Arranging and performing site visits to relevant offshore platforms and onshore plants and conduct photo-taking, site measurement and site surveys.
* Design piping layout, pipe support location plan, plot plans and pipe support details using Autocad 2008i and PDMS.
* Design pigging facilities Launcher and Receiver barrel.
* Design and update Escape Routes or Emergency Diagram layout.
* Checking and surveying equipment layout or feasible equipment location.
* Prepare hydrotest package for yard scope and offshore scope.
* Prepare Tie-in list, Line list, Material Take-Off (MTO) and SAP input.
* Prepare Technical Bid Evaluation (TBE).
* Prepare client's Comment Response sheets.
* Carry out inter-discipline check (Squad Check) of documents and drawings of other sections namely Process, Structural, Instrument and Electrical.
* Checking jobs and package prepared and produced by junior draftsmen and fellow piping designers.

1989 - 1994
Damit WorleyParsons Engineering Sdn Bhd
- Draftsman
Completed 5 years training as well as participating in the in-house training program, I have been assigned to various BSP projects.

On the job training involving design and drafting included:
* As-building of Gadong Metering and Jerudong hi-flow metering station, Brunei
* As building of BSP's Seria Terminal
* As-building of offshore FAGP4 (Fairley 4 Gas Platform).
* Well tie-in (WTI) and well repairs, Concurrently Production on Rig Activities (CPRA) and Modular Safety Upgrade (MSU) simplification on various offshore platforms.
* Removal of existing Kill Water system from platform (AMPA9)
* Upgrading platform utility services.

On the job training involving detail drafting included:
* Field visit to offshore platforms and onshore plants.
* Drafting of plot plans and complex layout.
* Demolition Process Engineering Flow Schematics (PEFS) and GA's.
* Revise existing piping general arrangement drawings.
* Preparing Isometric drawing/sketches including material take-off and Pipe Support details.

The Damit WorleyParsons Engineering training programs involves:
* Lectures by multi-discipline engineers and senior designers on equipment used offshore, basic understanding and principles of piping, vessels, valves, pumps, compressors etc. Drafting and office standard procedures.
* Complete as-built of BSP Training Centre Process Facilities, Seria, Brunei Darussalam.
* Completed a Rip weaver Process/Piping course which included video lectures and written exercises.

Other courses attended:
* One-day Introduction To and Understanding Of SAP conducted at the Brunei Shell Petroleum.
* Megamas Offshore Survival Safety Course, Kuala Belait, Brunei Darussalam.
* Helicopter Underwater Emergency Training HUET, Seria and Megamas, Kuala Belait, Brunei Darussalam.

Other interests and hobbies include:
* Still photography
* Outdoor activities (Trail running and hill climbing)

Character references:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1701 to 1750 of 7055)

Go to Search Parameters...

Brief Description

13+ years of Hands-on experience in Design, drafting and production supervision of Special purpose machines and product design of industrial Lamp fixtures using SolidWorks and AutoCAD.

I'm a chemical Engineer. Working in OMV as process supervisior.

Seeking a permanent position, preferably as a NDT Engineer, with 4+ years of experience in QA/QC and Testing & inspection in various fields like Pressure Vessel, Piping etc., and having extensive knowledge about NDT, Welding and Testing and inspection of components and assemblies and advance UT (IR

GEOPHYSICIST/GEOLOGIST

Civil Surveyor and Seismics

Highly skilled Electrical Engineer with 7+ years experience in the energy industry. Well versed in heavy oil operations, great communication skills, focused, and determined. Well versed with IEC, CEC, IEEE. Great interpersonal skills.

Knowledge in all kind of mechanical equipments like gas turbine, compressor, pumps and other equipments

Familier with fabrication at site for piping and structural inspection related to Refinery, petrochemical and Oil & Gas project. Conversant to various codes applicable to piping structurals.

Obtain a challenging position in an organization where I can groom professionally and develop the potential of facing problems, providing solutions and transmit a vision in reality.

More than Six years experience in EPC business of Oil & Gas and Refinery & Petrochemical sectors. Working as Mechanical Design Engineer for design/ detail engineering/ estimation of all Static Equipments

Piping Design Engineer, 4 yrs. exp

Geophysical Engineer

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

NACE certified Cathodic Protection Technologist # 8789

Senior Mechanical Engr. with a vast amount of process in engineering, operation, optimization of oil and gas production facilities (Well completions, artificial lift and gathering systems) Harnesses best-practice project management methodologies

Senior Geologist

13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene etc), Refinery, Oil and Gas industry (Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vesse

I am a Mechanical Engineer with 16 Years of experience as "Piping Engineer" in engineering of Offshore plants i.e Fixed platforms, FPSO, FPU and Onshore plants ex. Refineries, Petrochemicals, Polyester Plant etc. I am having vast experience of working with Leading International Clients.

Project Engineering

Senior Piping Designer with experience in piping design in Petrochemical and Refining Industries. Working knowledge of Bentley Rebis, PDS, Cadworx 3D, AutoCAD 2006, Flex CAD, Propipe, and MS Office

Fatigue Fracture FEA Vibrations Engineer

I am Instrument-Electrician technician specialist, I have 17 years of experience five years like supervisor in installation, calibration and operation of industrial instruments of measurement and control.

Experienced Piping Engineer onshore and refineries

Oil gas tankage [farm tank-speherical - double wall] fabrication/construction management. QAQC mangement - construction safety management

Associate myself with an organization, which has potential for both organizational and individual development and scope for learning and to enhance my skills team output and competent professional.

A Marine Maintenance engineer with International exposure and managerial experience. Last post as Technical superintendent at Tokyo, shipping related.

Electronic Engineer Full bilingual, with more than 8 years of experience, seven of them within the engineering field, working for the Technip group at different countries, Venezuela, USA, and the United Arabic Emirates (UAE), performing the design, hook up, precommissioning, commissioning, and loop

Computer literate, drive and initiative, good analytical ability

Corrosion Engineer with extensive knowlede in the area of materials selection for chemical and water processing industries.

Experience in O&M of gas turbine &steam turbine

15 years experience of planning, design and implementation of Networks, Telecommunications, Systems implementation and integration, with IT teams around world using my expertise and Multi-language skills: English, Russian, Portuguese, Spanish.

Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.

Geoscience Technician / Technical Writer

B.E mechanical engineer with 5 years experience & auto cadd piping engineer

4.5 years job experience in Reliance Industries Ltd ,RIL ,(INDIA) in LLDPE/HDPE plant. Presently doing MS in Natural Gas Engineering.

Piping engineer and designer

Expertise in reservoir modeling, gained experience in providing technical consultancy works to major oil and gas companies in the world including Aramco, KOC, ADNOC, BG and DPE. Expert user of RMS. Provided trainings to various clients around the globe.

Working in PM/MM-SAP implementation, Roll out and support projects. Having 5 years experince in Utilities/Power plant maintenance and Projects

Extensive experience on stationary equipments of oil, gas and petrochemical industries units, detail design and vendor document review.

Piping Designer, making Lay-put of piping general arrangement , isometrics and pipe support details,materials take-offs

PDMS Piping Designer

Piping Designer PDS administra

I have done 3 years apprenticeship in well-established organisation in Mumbai in naval dockyard

Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.

Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.

Design Engineer ( Static Equipment )

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 [ 35 ] 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out