Resume - Involved in commissioning and pre-commissioning activities.

Misco Jobs

Resume #65640

CONTACT INFORMATION:
View contact information...

D.O.B. 23rd june 1980

Objective
The most important thing I conceived from this world is that without information people cannot have opportunity, with information they can't avoid it.

Employment
NOV. 2007 ~ Till date
Working with DESCON ENGINEERING Company
As INSTRUMENT & CONTROL Supervisor at RAS LAFFAN OLEFIN CO.
(TECHNIP) QATAR.

* Involved in commissioning and pre-commissioning activities.
* Complies with all HSE and fire related rules and regulations and observes all requirements stringently.
* Supervise the erection work of cable tray, conduting, Impulse lines and Instrument tubing.
* Carries out work preparation activities for immediate action. Time entry, work schedule, work orders, check spare parts

March 2007 ~ Oct.2007
Working with HEXA CONTROL company
As ASST. Engineer INSTRUMENT & CONTROL on their several Projects

* HABIB SUGAR MILL (AUTOMATION OF CONTINOUS VACUUM PAN)
* BLOCHIOSTAN GLASS (AUTOMATION OF FURNACE )

Main Work Performed and Responsibilities:

* Carries out work preparation activities for immediate action. Time entry, work schedule, work orders, check spare parts
* Carries out new installations, modification and testing of equipment through various stages as per plan and in line with engineer's instructions and checks adherence to all parameters before handing over of equipment to Operations.
* Carries out skilled diagnosis and prepare calibration procedure for all type of instruments.
* Propose technical improvements.
* Supervise the erection work of cable tray, conducting, Impulse lines and Instrument tubing.
* Checks the equipment to locate the fault, decides on appropriate method of repair and carries out the job by dismantling, assembling, replacement or repair of the parts.

June 2005 ~ March 2007

Working with DESCON ENGINEERING Company
As INSTRUMENT & CONTROL TECHNICIAN on their SEVERAL OIL & GAS AND POWER SHUTDOWN PROJECTS.
MAJOR PROJECTS.

 BROUGE PETROCHEMICAL PLANT U.A.E.
 Takreer oil refinery ruwais U.A.E.
 UCH POWER PLANT ( ESBI contracting )
 Sawan gas field (O.M.V.) PAK.
 Petroleum exploration pak.
 Uch gas field (OGDCL) PAK.
 ADHI OIL FIELD (PPL) PAK.
 Chashma nuclear power plant pak.

Main Work Performed and Responsibilities:

* Discusses work assignment with supervisor and examines faulty equipment to determine scope of work, and obtains necessary tools and spare parts before starting the job.
* Carries out skilled diagnosis and prepare calibration procedure for all type of instruments.
* Checks the equipment to locate the fault, decides on appropriate method of repair and carries out the job by dismantling, assembling, replacement or repair of the parts.
* Discusses major overhaul and repair jobs with supervisor to plan their removal to the workshop for repair, replacement or reassembly.
* Complies with all HSE and fire related rules and regulations and observes all requirements stringently.

November 2002- June 2004

ENGRO NPK FERTILIZER PLANT (SIEMENS PAKISTAN)

As MAINTENANCE INSTRUMENTS TECHNICIAN

* Worked as maintenance technician in shift duty.
* Calibration, troubleshooting, maintenance of all kind of instruments.

April 2001 – APRIL 2002

MAKI CORPORATION CALIBRATION LABORATORY

As INSTRUMENT & CALIBRATION TECHNICIAN on their SEVERAL PROJECTS.

 PAK AMERICAN FERTILIZER.
 PAKISTAN TELECOMMUNICATION CO.
 NIMIR CHEMICAL.
 INDUS SUGAR MILLS.
 SHAHTAJ TEXTILE.

Project Involvement
Performed Calibration of instruments as per ISO 9000,2000
Standards.
Also involved in the installation, commissioning, loop testing, of instruments.

WORKING EQUIPMENT:
Worked on the following.

1) Standard Temperature Calibrator AMETEK Jofra Model No. 650SE2 microprocessor Base.
2) Resistance Decade Box Model IN17.
3) HART Communicator Micro Processor Base Rosemount, Model: 275,375.Aplisense.
4) Multi Loop Calibrator Micro Processor Base Model Jofra MLC.
5) Standard Thermocouple Calibrator, Durck.
6) Vibration Probe Calibrator Model No. TK3G by Bentley Nevada Corp USA.
7) Standard Pressure Calibrator 5000PSI AMETEK Jofra.
8) Vacuum Pressure Calibrator DRUCK 610,615,PC6 Pro.
9) Pneumatic Test Bench.
10) Hydraulic Pressure calibrator ( AMETEK, Jofra, Druck).
11) Dead weight tester.
12) Analyzers (PH, Conductivity)
13) ABB Hand Held terminal 691HT.
14) FLUKE process Calibrator 740B

Education
* SSC.
* INTERMEDIAT
* 2½ CERTFICATE IN INSTRUMENTATION MEASURMENT AND CONTROL FROM PAK-GERMAN TECHNICAL TRAINING INSTITUTE GULBERG LAHOER.

Trainings and Internships
ENGRO NPK FERTILIZER PLANT.[2004]
 WORK PERMIT PROCEDURE.
 Safety health and environment training

FECTO CEMENT LIMITED
Pakistan. [Internee, Instrument Technician][2001]
 Calibration of Instruments
 Maintenance of Packing Machine

MAKI CORPORATION CALIBRATION LABORATORY
Pakistan. [Internee, Instrument Technician][2000]
 Calibration of Instruments
 Transmitter Calibration
 Control Valve Calibration

HIGHNOON LABORATORIES LTD
Lahore, Pakistan. [Internee, Instrument Technician][2000]
 Machine Testing
 Electrical Work
Computing Skills
Microsoft Office
 Full Command (MS WORD, MS EXCEL, MS POWER POINT, MS Project, MS VISIO)
Windows XP
 Working experience on Windows XP
Internet Explorer
 Net Surfing

Personal data
Date of Birth june23, 1980
Nationality Pakistani
Religion Islam
Marital Status Single

References are available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 7055)

Go to Search Parameters...

Brief Description

TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks

Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.

More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.

More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.

Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.

Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking

I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.

Involved in commissioning and pre-commissioning activities.

To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion

Chemical Engineer, P.E. Petrochemical Design Background Experience

Rotating equipment / mechanical maintenance technician / Commissioning technician

Structural Designer

diploma in mech.eng, NVQ-level -3

Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package

PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

20 years of experience in the field of computer s/w and h/w

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

Technical / Lead Safety Engineer

NDT inspector LVL II

11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement

Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.

Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection

A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end

Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c

Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.

Process Engineer Resume Oil and gas

Piping Field Engineer – Technical Office

14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL

PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE

Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills

civil/structural engineer/manager

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Business Analyst Technical Writer Project Manager Programme Director

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out