Resume - Electrical Maintenance Engineer With over 30 years of experience in providing se...

Misco Jobs

Resume #66004

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
To go beyond here and challenging the horizons of the Oil &
Gas industry in providing benchmark services.

To meet the need of your company that is looking for a Change & Improvement to happen through enthusiastic and ambitious people, with a flair for good communication and awesome attitude.

And at the same time, an amalgmation of core competence and experience in technology to assure reliable and prompt solutions.

With a passion to work and promise to self for career growth & to deserve the best, from a company that does its part to build better environment for the dynamic professionals.

WORK EXPERIENCE:
------------
Working as Chief Electrician in Jack-up Rigs with PLC controlled ACSCR system (Aban VI & Aban VII) owned by ABAN OFFSHORE LTD. (1Year)

Worked with Oil & Natural Gas Corp. Ltd (Oil major of India) in different capacities holding responsible positions for 26 years as mentioned below;

As Maintenance in-charge for Deep Drilling Land Rigs

Servicing of DC Motors & Generators
ACSCR Panel maintenance
DC-DC Panel maintenance
AC motors maintenance
AC Panel maintenance
Top-Drive maintenance

As Maintenance in-charge for Process Plants
Both Offshore & Onshore
Servicing of HT Motors
Turbine-Generators
HT AC Panel maintenance
Repair of HVAC Units
VFD Panel maintenance

As Engineer-in-charge
Execute projects including installation of new rigs.
Execute maintenance contracts
Execute electrical equipment Servicing contracts.
Procurement of electrical equipments
Vendor development
Inventory management

Worked in Training institute of ONGC Ltd (School Of Maintenance Practices, Baroda) as Training co-ordinator & Faculty for Switchgear maintenance and Electrical safety

Worked as maintenance engineer in Piston-Ring foundry of GOETZE (I) Ltd. (2years)

Worked as Apprentice engineer in Bhakra Power House (1year)

PROFESSIONAL EXPERIENCE

As Management professional for manpower and inventory control.
Organized maintenance team and supervised Inventory for repair & maintenance activities through material management systems ensuring consistent flow of material.

Performed the responsibility of inventory control, quality assurance and quality control. Administration of the computerised Maintenance Management System, repairs, certification and classification requirements.

As project engineer for installation and commissioning of new drilling rigs and various developmental works related to plant or rig through contracts following the works & contracts procedures.

Proactive leader with expertise to trouble-shoot, implement change and quality control while maintaining safe and productive environment.

As training coordinator for trainings on LV & HV switchgear, Oilfield equipments, DCS & PLC controls, electrical safety etc. Conducted trainings on HT Switchgear Maintenance and Electrical Safety in ONGC, Baroda (India) & GNPOC, Khartoum (Sudan)

EDUCATION & CERTIFICATION:
------------
Highest Education: B E (Electrical) 1976
Institution: Thapar Institute of Engineering,
Patiala -147001 (Punjab-INDIA)

ADDITIONAL INFORMATION:
------------
JOB PROFILE
Started my career as Apprentice engineer in Bhakra Power House (1977-78) and later joined Goetze (I) Ltd, Bahadurgarh (Patiala) as Electrical Engineer for its foundry & machine shop.(1978 to 1980) (3 Years)
Joined ONGC in August 1980 as Assistant Executive Engineer (Electrical) and risen to the position of Chief Engineer (Electrical). Obtained experience in different and difficult environments like Rajahmundry (AP), Assam, Mumbai (Offshore), Ankleshwar, Mehsana & Baroda. (26Years)
Joined as chief Electrician on Jack-up Rig Aban-VII (1Year)

TRAINING PROFILE
ACSCR Controls Hill Graham Controls, UK
Drilling Rigs IEIP, Ploesti, Romania
Flameproof Equipment CMRI, Dhanbad,
Oil Field Equipment BHEL, Hyderabad
HT Motors BHEL, Bhopal
HV Switchgear ABB, Baroda
HUET Survival Systems, Mumbai
STCW TS Rahman, Mumbai

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6511)

Go to Search Parameters...

Brief Description

PROJECT, INSTALLATION, COMMISSIONING, MAINTENANCE OF INSTRUMENTATION AND CONTROL SYSTEM

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Instrument / Controlsystems Engineer

Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.

Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Chief Metallurgist

Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out