Resume - MBA / Instrumentation Engineer with 3 Years of Experience in PLC & SCADA Program...

Misco Jobs

Resume #66229

CONTACT INFORMATION:
View contact information...

Professional Profile o Rich and insightful experience in PLC & SCADA.
o Domain experience in Power Plant, Chemical industries.
o Diverse onsite experience in PLC projects. Experience in Ladder logics & HMI development.
o Worked extensively in a marketing environment for requirement capturing, proposal writing, business support and client interactions.
o 2+ years rich experience in developing logics & HMI, marketing products & office management.
o Undertaken project executions at site, also performed market/ field surveys to increase business.
o Good communication skills, honed with the ability to liaise with top-level decision makers.

Organizational Experience
(Present Organization)
Company: Chino – Laxsons (India) Pvt. Ltd., Kanpur Branch
Business Domain: Process Control Instrumentation
Designation: Project Engineer
Product Highlights
'Chino – Laxsons' a name synonymous with Process Control Instrumentation have established themselves as a Qua Leader since its inception in 1972 based at Goregaon the Western Suburb of Mumbai.
Laxson's knowledge inspiring and skills at that we are in, we are staffed to meet the dictates of the field and thus have entered to joint venture in August 1996 with M/s CHINO CORPORATION TOKYO, JAPAN for Instrumentation and Control for the past 10 decades.
Continuous success is depended upon our ability to rapidly generate market driven technological advances that differentiate us from our competitors, our extension network of highly knowledgeable sales / service engineers at hand, competent enough for the expertise that industry demand for ultimate control over the process.
Job Responsibilities
* To develop Ladder Logic for PLC / DCS.
* To Configure SCADA for the System.
* To provide efficient and reliable service backup to customers.
* Handling customer services.
* Improving customer relations.
* Make satisfied to customers.
Project 1: Highlight
Project Name: Automation of Aluminium Chloride Plant
Project Location: Kanoria Chemicals & Industries Ltd., Renukoot, U.P., India.
Role: Project In-charge
Commissioned PLC system for their Aluminium Chloride Plant in the duration of one month including software generation & Hardware assembling.
- SMAR make LC700 PLC System.
- Software worked on: Conf 700 for ladder logic generation & Iconicx for HMI generation.

Project 2: Highlight
Project Name: "Automation of Panki Power Plant, Unit #3" under Instrumentation Limited, Kota
Project Location: Panki Thermal Power Station, Kanpur, India
Role: Project In-Charge
Commissioned PLC system for the drum level control and measurement system in the duration of two months including software generation & Hardware assembling.
- SMAR make LC700 PLC System.
- Software worked on: Conf 700 for ladder logic generation & Iconicx for HMI generation.

Project 3: Highlight
Project Name: "Automation of Jacket unit"
Project Location: M/s. M. Kumar Udyog Pvt. Ltd., Malwan, Fatehpur, U.P.
Role: Project In-Charge
M/s. M. Kumar Udyog automatized its Bullet Proof Jacket and Helmet unit to increase its productivity and quality to produce high rise in the international market. Chino – Laxsons was deployed for automation of the plant.

Job Responsibility
My primary responsibility involved o Product manufacturing analysis.
o Requirement capturing through discussions with Top Level management.
o Logic and HMI designing.
o Implementation of Logics.
o Device Used: SMAR make CD600 – Multi loop Controller.
o HMI used IFIX 4.0.

Project 4: Highlight
Project Name: "Automation of Harduaganj Thermal Power Plant, Unit # 7" under Instrumentation Limited, Kota
Project Location: Harduaganj Thermal Power Station, Aligarh, India
Role: Project In-Charge
Commissioned PLC system for the drum level control and measurement system in the duration of two months including software generation & Hardware assembling.
- SMAR make LC700 PLC System.
- Software worked on: Conf 700 for ladder logic generation & Iconicx for HMI generation.

Project 5: Highlight
Project Name: "Automation of Harduaganj Thermal Power Plant, Unit # 5"Green Field Project under Instrumentation Limited, Kota
Project Location: Harduaganj Thermal Power Station, Aligarh, India
Role: Project In-Charge
Under implementation DSC system for all the closed loops, open loops & measurement including software generation & Hardware assembling.
- SMAR make LC700 PLC System.
- Software worked on: Conf 700 for ladder logic generation & Iconicx for HMI generation.

Projects Done (College Level)
1. Microprocessor Based Gear Monitoring System
Objective of the project is to monitor the perfectness of the mechanical gears. It checks the teeth size and displays the result on the LED display. This is a curriculum project in 6th semester of B.E. Instrumentation under Visveshwariah Technological University. Its our team of 4 engineers who worked smartly to achieve success.
2. Clean in Place using PLC & SCADA
This project is compiled at the working site of Analogic Power Systems, Pune under the guidance of Mr. J.V. Chavan, Sr. Project Executive. This project is of great use in process industries as it eases the routine clean up of process tanks without de assembling it and in a cost effective way.
Know-How in Information Systems
Design Tools: Microsoft-Visio.
Automation Tools: SCADA – Processview, Intelluation, Ifix 4.0, System 302
Network: Conversant with LAN/WAN.
Operating System: Windows - 98, 2000, XP, NT and DOS
Programming Languages: C, C++
Logic Controllers: PLC – Smar LC700, Smar CD600, Omron, Allen Bradely
Processors: Programming in Microprocessor, Micro-Controllers
Professional Training
Training in PLC & SCADA System under Analogic Power Systems, Pune
PLC – Allen Bradely – Micrologix 1200, Micrologix 1500, SLC - 500
SCADA – Rockwells Automation Version 6.3

Academic Majors
Level: POST –GRADUATION
Degree: M. B. A (Project Management)
Institute: Corvus Institute of Technology & Management, Kanpur. U.P., India.
University: Allahabad Agriculture Institute Deemed University, Allahabad, India. www.aaidudec.org
Term: 2 -Years (4-Semesters)
Year: 2004 -2006
Score: 58%

Level: GRADUATION
Degree: B.E. (Instrumentation Technology)
Institute: B. V. Bhoomaraddi College of Engineering and Technology, Hubli. Karnataka, India. www.bvb.edu
University: Visveswaraiah Technological University, Belgaum, Karnataka, India.
Year: 1999-2004
Score: 61.66% - Aggregate of 4-years Education.

References
Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6635)

Go to Search Parameters...

Brief Description

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Electrical Engineer

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems

Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard

2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor

I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.

qualiy inspection

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.

Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.

Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.

TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Drilling Supervisor / Engineer 5+ years experience with HTHP wells.

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Surveyor-Photogrammetrist

30 years old and graduated from The University of Muhammadiyah Surakarta (U.M.S) – major in civil engineering. I am still employed with PT. Technip Indonesia.

Piping (Materials & Specification) Engineer

MBA / Instrumentation Engineer with 3 Years of Experience in PLC & SCADA Programming ; Project Management ; Business Development

RELIABILITY TECHNICIAN FOR INSTRUMENT AND CONTROL

B. Tech (Electrical/Electronics Engr.) + 6yrs working experience in oil and gas company.

Highly motivated engineer seeking for opportunities in the Oil and Gas industry

6 years experience on OCTG manufacturing and Qualification 4 years bachelor Degree in Mechanical and Production Engineering

I have a degree in Applied Chemistry( Chemical Technologist) with 6+ years of experience in Analytical Laboratory ,Quality control, Chemical processing engineering in oil company .My skills are Chemical testing & Analysis, Basic lab techniques & Standard procedures, Development and process validatio

I have graduated from University of Calgary. I have 3 years experience in P.O.G.C. (Asaluye) as Reservoir Engineer.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out