Resume - More than 28 years as a Petroleum/Reservoir Engineer in Exploration and Producti...

Misco Jobs

Resume #66571

CONTACT INFORMATION:
View contact information...

Senior Reservoir Engineer

Education
SPE Certification - Passed SPE certification Engineer, February 2006
MS - Petroleum Engineering, Indian School of Mines at Dhanbad, India,
March 4, 1992.
Diploma - Petroleum Prospecting and Reservoir Evaluation, Norwegian Institute of Technology, University of Trondheim, Norway, 1984 (First class first position with outstanding grade).
BS - Petroleum Engineering, Indian School of Mines at Dhanbad, India, July 13, 1977 (High First Class Honors ).

Professional Affiliation

Member, Society of Petroleum Engineer (SPE), 1982-present

Personal Data

Born: 11 December, 1954 ; Married, one son (17 years).

Permanent Address
C/O K. K. Barua, IAS (Retd.)
Near HUDCO, Basistha Road
PO: DISPUR, Guwahati-781006
Assam (India)
Phone: 91-361-22606161

Employment History
August 2002 – Present
Petroleum Development Oman (PDO)-Shell
Reservoir Engineer/Reservoir Surveillance Engineer, Well & Reservoir Management Team, Yibal, in PDO-Shell. Production is about 650,000 BOPD.

Sept-2006-Present-Reservoir Engineer
* Currently working on Yibal Pattern Implementation Project- carried out surveillance based performance of sectors, developed pseudo relative permeability curves, water coning correlation, analytical correlation horizontal/vertical well spacing and breakthrough time vs oil zone thickness for bottom water drive, assessed fracture spacing and imbibition recovery, volumetric attic oil, conducted mechanistic and sector modeling etc. Prepared alternative development option for pattern implementation in Yibal field and carried out economic evaluations.
* Used streamline model prepared by consultant PETROTEL for optimizing waterflood. Used injection efficiency for optimizing waterflood management. Identified water shut-off additional perforation & infill drilling opportunities using the model. Currently identifying workscope for re-development of Yibal Field.
* Developed waterflood diagnostic plots for wells & pattern analysis, OFM templates for Shell Global. Carried out waterflood analysis of the patterns using analytical methods (Voidage, Sweep, Performance plot, Heterogeneity Index, ABC plots) for ranking and pattern optimization
* Prepared short-term production forecasts (STPF) and annual reserves estimates.

2004 Aug-Aug2006-Reservoir Surveillance Engineer
* Responsible for monitoring performance of 120 wells (80 producers 40 injectors) and prepared "wellbook/wellfiles" identifying opportunities for production optimization. Prepared workover /CTU proposal for additional perforation, ESP upsize, water shut-off, stimulation, gas lift optimization, fish bones etc.
* Key member of "integrated production modeling team" spearheaded by Shell. Modeling and diagnosis of ESP and gas lift wells (80 wells) for trouble shooting and optimization.
* Responsible for voidage management, sweep analysis, data gathering and interpretation and overall performance of the area.
* Prepared annual proved reserves for the area.
* Analysis of step rate tests & after closure data of fractured water disposal wells and pressure fall off tests on injectors.
* Provided coaching/ mentoring and guidance to less experienced staff (Omani national) as opportunity arise.
* Providing reservoir engineering support to less experienced team members.
Aug 2002 Aug-2004 Aug-Reservoir Engineer
* Responsible for reservoir management of Yibal field – a matured fractured carbonate reservoir (more than 800 completions ) producing 70,000 BOPD with 94% water cut and 1 MM bbl of daily injection. Main responsibilities include reservoir voidage management, setting pattern production/injection target, swing list & pressure map update, pattern by pattern waterflood analysis-sweep evaluation, water management, production / injection forecast, data gathering, monitoring and interpretation. Prepared a comprehensive report on "Voidage management plan for Yibal field" for Field Development Plan (FDP).
* Material balance, decline curve and performance based analysis for estimating remaining reserves, preparation of 10 injector well proposal, economic evaluation and short-term production forecast.
* Prepared a detailed Surveillance Plan for 2003 & 2004 for waterflood optimization, address integrity issues, reservoir modeling uncertainty and production optimization. Prepared surveillance requirement for 2004 onwards for Yibal Field Development Plan (FDP).
* Responsible for analysis of Pressure Buildup, Falloff & Step rate tests.
* Providing reservoir engineering support to "surveillance engineers & production technologist" for planning well intervention, workovers, stimulation, water shut-off, and production optimization through additional perforation, chemical shut-off, ESP conversion & upsizing and gas lift optimization. Analysis and evaluation of PLT & RST, WFL, METT & USIT logs for well workovers and integrity repair.
* Conducted "after action review (AAR)" of 40 new injectors drilled and 15 converted injectors during the past two years in Yibal field. Prepared a comprehensive report highlighting incremental oil gain, sweep improvement and economic analysis and lessons learned.
* Prepared short-term production forecast (STPF) for 2004-2005 and "2005 programme build" for long term production forecast and estimating proved and expectation reserves.
* Evaluate and monitor performance of 2003-2004 new wells to optimize their performance.
* As member of task force, provided reservoir engineering support to complete "water injection study" to address injectivity decline and facilities issues by OIL PLUS.

August 1996 – July 2002

ZAKUM DEVELOPMENT COMPANY

Lead Reservoir Engineer with ZADCO in Abu Dhabi, UAE. It is a major E & P subsidiary of ADNOC (Abu Dhabi National Oil Company). The other partner is JODCO (Japan). Production is about 600,000 BOPD. Following studies have been completed:

* Conducted a study on "Performance Review & Development optimization of Upper Zakum Northern, Eastern, Central and Southern Areas". Evaluated pressure-production performance and identified the need for additional infill injectors using material balance analysis.
* Key member of "Upper Zakum Water Flood Review Team" with a Shell Consultant. The project spearheaded by ADNOC was to review the current water flood in Upper Zakum Field and provide recommendations to improve upon it. Prepared a comprehensive report and action plan to optimize waterflood in UZ field.
* Responsible for design and interpretation of MDT and single/dual well vertical interference tests for " High Density Data Gathering Project" spearheaded by JODCO for special monitoring and data acquisition program.
* A study on pattern balancing and voidage replacement in Thamama II reservoirs, Upper Zakum Field. The study was conducted to optimize production and injection allocation in the field for effective reservoir management. Produced a comprehensive report.
* Responsible for estimating well potential/deliverables and preparation of Interim Production Rate for Upper Zakum field, performed production forecasts and decline curve analysis. Estimated full potential of reservoirs by conducting nodal analysis of 300 strings.
* Responsible for construction of a production/injection database of more than 500 wells using OFM software. Conducted a pattern balancing study of Thamama IA reservoir, Upper Zakum Field using OFM software.
* Problematic Well Study in Thamama IA and II reservoirs, Upper Zakum field. Carried out a detailed study on 200 strings of Thamama IA and II reservoirs to diagnose well problems and recommend appropriate remediation measures to improve their performance.
* Transient Test interpretation of oil, gas and water injection wells including horizontal wells using 'PAN system' software. Performed numerical simulation of horizontal well tests using "weltest 200" software.
* Key member of ongoing Conformance control, Polymer treatment, Tracer study projects and Pilot Gas Injection / Gas Lift Projects. Supervised, implemented & evaluated polymer treatment jobs in both injection & production wells for conformance control; Evaluated tracer study results for vertical conformance; Performed gas lift design for pilot project.
* Performed a detailed study on evaluation of horizontal wells (120) drilled in Upper Zakum Field. A technical SPE paper (SPE # 49540) was prepared and presented at the 8th ADIPEC.
* Responsible for preparing well prognosis for horizontal workover and instituting various data gathering and production monitoring programs for waterflood and pilot gas injection management.
* A study on high GOR and gas breakthrough wells in Satah Field. Carried out performance forecasts under various production and gas injection scenarios to optimize production /injection strategy using MBAL software. Produced a detailed report.
* A study on pressure-production performance and gas-in-place (GIP) estimation in Khuff reservoir, Satah field.
* Responsible for supervising and conducting special training program for UAE Nationals.

February 1994 – July,1996

KUWAIT OIL COMPANY

Petroleum Engineer with KOC in Ahmadi, Kuwait. Production is more than 2.00 MM BOPD. Worked with Chevron secondees on four projects and following work were performed:

* "Horizontal Well Evaluation": Well evaluation, well test interpretation and analytical simulation of horizontal wells. The study resulted MM$ saving by stopping further horizontal drilling campaign. Based on the study, a technical SPE paper (SPE # 36232) was prepared.
* "Productivity Improvement Project": Well reviews and preparation of PLT, TDT, well test, stimulation, coil tubing and rig workover programs for candidate wells.
* "Pressure Transient Analysis": Pressure transient analysis of 300 wells for reservoir characterization and provided input for reservoir simulation. A technical SPE paper (SPE # 37749) was prepared.
* "Effluent Water Disposal Strategy": Injectivity calculations, injection performance prediction, nodal analysis and falloff test interpretation. Produced a comprehensive report.
* Key member of a multidisciplinary "Prospect Evaluation Team", a part of the "Reservoir Categorization Project", spearheaded by BP. Performed technical and economic evaluation of prospective fields using prospect software.
* Nodal analysis for production optimization and design of ESP for wells in Burgan field.
* Responsible for planning, design and interpretation of RFT/MDT/SFT and transient well tests.
* Supervised and trained national engineers and Kuwait University students. Provided Technology Transfer.

February 1978- January 1993

OIL AND NATURAL GAS CORPORATION LTD, INDIA.

Worked as Reservoir Engineer in various work centers of ONGC Ltd., a national E & P Company in India. Production is close to 650,000 BOPD.

1990-1993

Joint Director (Reservoir ) Oil and Natural Gas Corporation Ltd., Bombay Regional Business Center.

* Conducted a study on "Reserves Estimation and Performance Analysis of L-II Reservoir, Bombay High Field" to optimize second phase of development and establish prudent reservoir management plan.
* Responsible for a reservoir management study on "Reservoir Performance Studies of Bombay High L-III reservoir (1500 MMT inplace oil)" to evaluate aquifer strength, voidage replacement, water flood performance, gas cap production and mixed drive performance using material balance technique.
* Conducted a material balance study on performance forecast of Bassein gas field (279 Billion m3 in-place gas) using both depletion and water drive models to evaluate feasibility of higher gas withdrawal and additional development drilling requirement.
* Carried out detailed reservoir engineering performance and economic evaluation of 27 marginal oil and gas fields in Bombay Offshore for foreign bidding. Used MIRS simulator to study some of the fields.
* Performed a study on use of dimensionless IPR curves for predicting performance of gas wells in Bassein field, Bombay offshore.
* Conducted a study on productivity of gas wells in Tapti Gas Field with and without gravel pack to evaluate well potential and optimize completion strategy.

1985-1990

Sr. Deputy Director (Reservoir ) Oil and Natural Gas Corporation, Eastern Region Business Center.

* "Performance review, recovery estimation and infill drilling in Lakwa TS2-main block (32 MMT in-place oil)".
* "Performance review, infill drilling and pressure maintenance in Lakwa TS1 sand, North block (13 MMT in-place oil)".
* Key member of Gas Storage Project for Underground storage of natural gas and future utilization in ONGC, ERBC, India.
* Conducted a study on pilot water-alternating-gas (WAG) injection in Rudrasagar field (10 MMT in-place oil).
* Performed a classical reservoir engineering study on reserve estimation and performance prediction of Champang Field (Fractured Basement, 10 MMT OOIP).
* Performed economic evaluation of all the field development plans.
* Responsible for monitoring reservoir, well pattern and individual well performance; prepared and recommended reservoir management plan and procedures.
* Responsible for preparing 5 and 10 year business development programs and budgets for fields of eastern region, ONGC Ltd.

1978-1984

Deputy Director (Reservoir) ONGC, Eastern Region Business Center (ERBC).

* Responsible for planning, design and interpretation of Transient Well Tests.
* Performed sick well analysis and prepared action plan for workover, stimulation in association with production engineers.
* Conducted an integrated reservoir management study on "Analysis, Diagnosis and Remedial Measures in High Water Cut Wells of TS2 sand, Lakwa field".
* Reservoir management and surveillance of Geleki Field (100 MMT). Monitored well and field performance. Provided recommendations for remedial action and further data acquisition.
* Conducted a Five Spot water injection study for TS5A reservoir, Geleki Field (30 MMT inplace oil).
* Performed reservoir testing of Baramura gas wells and estimated gas reserves from RLT.
* Responsible for well review, production/injection performance monitoring and preparation of monthly production plan.

Professional Development: Training and Short Courses attended

* Advanced Waterflood, December 2007, Shell
* Reservoir Simulation P217B, November 2007, Shell
* Well & Reservoir Surveillance September 2007, Shell
* Decline curve analysis by Petro Skills 2007
* Saphir training on well testing 2006
* Full Reserves Training including SEC guidelines by Shell (September 2006)
* SPE Certification Course, 2006
* Petrel For Reservoir Engineers, 2006
* Mores simulation course using Dynamo, 2005
* Decline curve analysis, Petro Skill 2005
* Integrated Production Modelling (IPM) by Petroleum Experts, March 2005
* Gas lift using WINGLUE software by Shell, October 2004
* Gas lift by Engineering Insight, September 2004
* Streamline Simulation, by Streamsim Technology, September 2004
* Reservoir Simulation using MoRes simulator with Spider interface by Shell, 2003.
* Economic evaluation and decline curve analysis using PEEP by Geoquest, 2003
* Practical Production Geology by Shell Expro, Aberdeen, UK 2002
* Eclipse 100 & Eclipse Office by Geoquest, 2001.
* Economic Evaluation by Parenergy, UK, 2000.
* Oil Field Manager (OFM) software by Geoquest, 1998.
* Fundamentals of Reservoir Rock Properties by Core Lab, 1998.
* FINDER by Schlumberger, 1996.
* PROVISION and PIPEPHASE by SIMSCI 1995.
* Prospect Evaluation ; Reservoir Eng. & Economics by BP, UK 1995.
* AIX - Windows by IBM 1994.
* Horizontal Well Technology by Joshi Technology Inc., 1993.
* Well Testing and Production Logging by Schlumberger, 1991.
* Reservoir Simulation by ONGC, India.
* Advanced mathematics for Reservoir Engineers by ONGC, India.
* Two months work association with Soviet Technoexperts in Moscow for preparation of Technological Scheme of Development for Tipam Sands, Geleki Field ( 100 MMT oil-in-place) in 1988.
* Artificial lift methods by Kermit Brown, 1986.
* Production logging by Schlumberger, 1986.
* Training on Electronic Pressure Gauge at Geophysical Research Corporation, Tulsa, Oklahoma, USA in 1985.
* Enhanced Oil Recovery by OGCI, 1984.
* Extensive training in 'Statoil', 'Norsk Hydro', 'Saga Petroleum', 'Elf-Aquitene" and 'Norwegian Petroleum Directorate' in Norway on petroleum exploration and development in 1984.
* Naturally Fractured Reservoirs by Roberto Aguilera, 1983.
* Water Control, Sand Control and Cementation by Halliburton in 1982.
* Coring and core analysis by CFP, 1981.

Professional Development: Conference attended

* Attended 2007 EPM RE/PP Conference, 14-16 May, Oman
* Attended IPTC, Doha 21-23 November 2005
* 7th Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi,
13-16 October, 1996.
* 8th Abu Dhabi International Petroleum Exhibition and Conference, Abu Dhabi,
11-14 October, 1998. Presented a technical paper SPE # 49540.
* 9th ADIPEC at Abu Dhabi, UAE, 15-18 October, 2000. Presented a paper (ADIPEC # 0933).
* A Workshop on "Challenges of Horizontal Wells" held on 24-25 October 2000 at Dharan, Saudi Arabia. Made a presentation on "Horizontal Wells Experiences in Upper Zakum Field".
* A SPE technical forum on "Horizontal Water Injection: Successes, Failures and Challenges" sponsored by Petrogas in Muscat, Oman, 2003. Made a presentation on "Horizontal Injectors Performance in Yibal Field".

Participation in Short Courses

* Participating Instructor, " Gas well testing - Theory and Practices", for Petroleum and Reservoir Engineers of ONGC, 1987.
* Participating co-instructor with Chevron secondee, "Pressure Transient Testing Using Pan System Software" for 'under development' Kuwaiti engineers in KOC, 1996.

Publications

* Lakshi Konwar, Pankaj Neog, Pawan Kouli: "Application of Field Derived Pseudo-Relative Permeability Curves in Building Mechanistic Models in Yibal Field", paper presented in 2007 EPM RE/PP Conference, 14-16 May, Oman

* Konwar, L.S., Falade, G.K.: "New Procedure for Horizontal Well Test Design and Interpretation in Heterogeneous Reservoirs", paper presented in the 8th ADIPEC at Abu Dhabi, UAE, 11-14 October, 1998 (SPE # 49540).

* Kabir, C.S., Del Signore, A.G., Konwar, L.S., Al-Fares, A.A: "Performance of Horizontal Wells in a Tight Carbonate Reservoir", paper presented at the joint SPE / ADIPEC at Abu Dhabi, UAE, 13-16 October 1996 (SPE # 36232).

* Kabir, C.S., Moon, M.S., Pederson, J.M., Konwar, L.S., Al-Dashti, Q., Al-Jadi, I.: "Characterizing the Greater Burgan Field: use of well-tests, distributed pressures and geologic modeling", paper presented at 1997 SPE Middle East Oil Show & Conference, 15-18 March 1997, Bahrain (SPE#37749).

* Al-Ansari, F., Konwar, L.S., Urasaki, D., Parker, A., Hiraoka, T., Mitsuishi, H.: "Vertical Transmissibility Assessment Across Stylolites in Stratified Carbonate Reservoir - A Field Experience", paper presented in the 9th ADIPEC at Abu Dhabi, UAE, 15-18 October, 2000 (ADIPEC # 0933).

* Konwar, L.S.: "Prediction of Wet-Oil Production in Lakwa TS2 reservoir, Main Block", paper presented at VIth Oil and Gas conference at KDMIPE, ONGC, Dehradun in 1982.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 6899)

Go to Search Parameters...

Brief Description

Free! Petroleum Engineer with 12 years of progressive experience gained from active involvement in all phases of oil and gas exploration and production(Deep Water and Onshore. Vast experience in Well and Reservoir Surveillance, Integrated Production Systems Modeling, Production Engineering and Technology

Free! Qualified safety professional with proven national and international track record, demonstrated, through a successful 11-year safety and health management career, his ability to lead poorly performing facilities to top quartile performance.

Free! Planning / Scheduling,Project engineering,Subcontracts administration,Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Free! 15 years plus of domestic North Sea and international experience in the Petroleum Industry. These facets include oil and gas production and exploration (drilling), petroleum refining, chemicals and power generation. Areas of expertise include plant operation, construction supervision, and commission

Free! Experienced Supervisor in the Electric Submersible Pump Industry

Free! As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

Free! Geoscience professional including experience on 3D seismic interpretation on Landmark workstation. Also experienced industry negotiator with particular experience in unitisation and marginal fields farm-out negotiations. Good at team working and cross-cultural interactions.

Free! If you are seeking a project expert in the energy, oil, and gas industries, who brings a comprehensive background beginning in on-site project management, and expands into in-country executive, driving new business, contracts and client relationships. I would be an excellent candidate for your consi

Free! HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing

Free! A highly skilled Senior Inspector Welding/Construction Supervisor with over 30 years as a specialist in the fabrication industry in Europe, The Middle and Far East.

Free! I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.

Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! 19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.

Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! 15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Reservoir Engineer, Heavy Oil Recovery, EOR, Production Optimization, Simulation Studies

Twenty years instrument and control systems experience includes positions as: lead instrument and control system engineer on onshore and offshore design and construction projects for oil and gas plants, refineries, pipelines and chemical plants

I am NACE Certified corrosion specialist, fellow member in the institute of corrosion. I have BSc and MSc in chemical engineering and PhD in corrosion engineering with long experience in R&D, oil and gas industry.

QA/QC (PIPING & WELDING), CSWIP 3.2,

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

Ammonia, LPG/LNG, freon, electrical and water systems

I am Nace certified Coating Inspector Level 3 & ACA Certified Corrosion Technologist . My basic qualification is B.Sc.( Che), Mechanical Engineer I am having Total 24+ yers of experience in the field of Coating. 10 years in Oil & Gas Inspection on offshore & Onshore

Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms

21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.

21 Years Experience of Process Engineering in Refinery/Oil & Gas

A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.

Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager

My skill in maintenance and repair of heavy equipments,compressors and pumps

Reserve Management, Project Economics,Exploration Risk Analysis, Acquisitions

I exerted with different degrees the most of geophysicist tasks and particularly the supervision of seismic processing and interpretation projects. I am particularly interested in the static corrections in dunes areas. I have a personal work on the subject that has yielded good results

Petroleum Geologiwst, oil and gas exploration and production, geologic mapping

Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.

Engineer - Geologist of Oil and Gas Exploration

Senior Production Technologist

I hold the B. Sc. and Master’s degrees in Geophysical Engineering from Polytechnic University of Tirana (1977), Albania. Thirty years of diversified experience in well logging, administrative projects, and quality control. Providing petrophysical support to the integrated study

30+ years of EPC and consultancy Process experience. Conceptual design, Simulation (Hysys / proII) of oil & gas and refinery processes. Expertise in oil & gas gathering stations, gas sweetening, dehydration; Water treatment and injection systems; NGL units employing Turbo-Expanders; Refinery units.

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Experienced on all refinery products and intermidiates. Competent assessor for ISO 17025

Indian, working for U. S. Dollar Seven hundred twenty million hydro-carbon handling project in NIGERIA and received excellent employee award Seeking Director / ManagerHSE/Environmental/Civil Education: Ph.D. (IIT Bombay) and Safety Diploma

Designing , Praparation & Checking of high pressure transmission pipelines

„w Trained competence through training in Electrical Design Software Analysis (EDSA) and Project Management Techniques

Petroleum Reservoir Engineer,

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

More than 28 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Project Manager with 26 years experience managing Oil and Gas FEED, EPC, PMC, EPIC, and EPCM projects . Responsible for Senior Project Engineers, Contracts Administrators, Project Controls Engineers, Safety Engineers, and QA/QC personnel. Worked with and managed expatriate and multi-cultu

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out