Resume - Plant inspection: with API 510, 570, 653. adttional qualification in welding ins...

Misco Jobs

Resume #66617

CONTACT INFORMATION:
View contact information...

Inspection Engineer

Objective.

"Prepare, Plan, Implement, Execute and Follow the Quality System and field inspection to ensure good quality with minimum production cost and time".

Personnel Details.
Date of Birth: 04.03.1970 Age: 37
Sex: Male
Martial Status: Married
Nationality: Indian
Driving License: Valid Driving License (Light) Qatar

EDUCATIONAL QUALIFICATION

Degree College / University
Diploma in Mechanical Engineering M.I.E.T Polytechnic / Trichy
Board of Examinations / Madras/ India
Bachelor of Engineering (Mechanical Engineering) Regional Engineering College/ Trichy
Bharathidasan University/ Trichy/ India

TECHNICAL CERTIFIED COURSES

* API 510 Pressure vessel Inspector. Cert.No.27690
* API 570 Piping Inspector Cert. No.28953
* API 653 Storage tank Inspector Cert. No.29193.
* LEEA entry exam and LEEA Lifting gear general exam passed.
* CSWIP – 3.2 Senior Welding Inspector by TWI. Cert.No.12004
* Certified welding inspector by American Welding Society (AWS). Cert.No.00071861
* ASNT level-II in UT, RT, MT & PT.
* Certified welding inspector by Welding research institute & Indian Institute of Welding.

Summery of Experience

18 years of Professional experience in Plant inspection and welding in fabrication activities in Petrochemical, fertilizer and Oil refineries, tank form, pipe lines with various clients according to relevant international standards. Having Authorized Pressure vessel Inspector certification (Accredited by API after meeting the requirements for API-510). Involved and well versed in Various NDT methods and interpretation. Conducting Remaining life determination of equipment using relevant codes and inspection data for recommending necessary timely replacement of equipment to avoid catastrophes.

Lifting equipments survey and inspection of lifting gears, lifting beams and lifting machineries.

Conducting courses for API 510/ 570/ 653 exams in Middle East.

COMPUTER KNOWLEDGE
Sound Knowledge in MS Office (Word, Excel, PowerPoint), project planner, AutoCAD.
Sound Knowledge Using TWI-C-Spec software product Weld spec and Welderqual
Sound Knowledge using Stahlschlussel 1998- Key to steel software and Internet.

Professional experience Details. (18 Years)

May 2007 - till date SAJGAS Sharjah

As Inspection Specialist

 Responsibility for plant preservation inspection activities.
 Preparation of Inspection procedure for all inspection activity in gas plant.
 RBI procedure and data review for this plant.
 Listing of equipment for inspection on priority basis & type of inspection for each equipment and pipe lines.
 Subcontractor evaluation and review of documents.
 Preparation of scope of work for subcontractor.
 Preparation of presentation for various inspection methods to familiarize plant personnel's.

Oct.2004 – April 2007 ABS Group Inc. Dubai

Client: Qatar Fuel & Additives Company (QAFAC)

 Inspection Engineer for revamping project of this plant and responsibility for all activities like project document review, review of quality plan, preparing of inspection plan for all equipments in this plant. Inspection at subcontractor's work shop of vessel fabrication and pipe line fabrication.

Client: Qatar Gas Company

 Participated in plant shutdown inspection of Train 2. One of the team members in shutdown Inspection.
 Responsibilities: Through Inspection of Pressure vessels, column, Heat exchanger, sea water line and details report preparation and recommendation for repair.

Client: NADCO (Qatar)

 Inspection of Tanks repairs in QP Refinery (NODCO). Posted as Authorized inspector for Tank repair inside the plant and checking static equipment inspection and piping inspection. Checking condition for fitness to purpose all equipments.
 Carryout details study for tank roof, shell, bottom plate, annular plate & foundation for repair requirement as per API 653, all required area for modification and repair are identified and detailed location and type of repairs detailed to contractor for their modification.
 Selection of proper NDT to find out expected defects with guidelines with the recommended practice API RP 575 and client recommendation.
 Preparation of ITP, method of statement, testing procedure for all inspection activities.
 Monitoring all repair work and witnessing of all testing.
 Carry out all stage inspection like levelness, peaking, banding, plumpness, roundness and all NDT.
 Final certification of the tank.
Client: EMALAB (Dubai)

 Third party inspection of new LAB plant construction and commissioning. This includes contact document review, sub-contractor procedure review. Inspection of equipments, vessels, pipelines, hydro test of all components, insulation inspection and painting inspection.

Client: EMOIL (Dubai)
 API 650 tanks 14nos with all pipelines in Jabalali free zone. Posted as Resident third party inspector for tank construction inspection.

Client: QASCO (Abu Dhabi) offshore

 Rerouting of 24inch pipeline in Umalnar area in under water. Posted in the barge as third party inspector for pipeline for inspecting welding of pipeline, NDT, pipe coating, laying, hydro test and safety.

Client: ENOC (Djibouti – East Africa)
 Checking fit of purpose API 620 and 650 tanks 21nos, with all pipelines in Djibouti. Posted as Resident third party inspector for tank inspection.

Dec.2002 – Sep.2004 Samsung Corporation - Mesaieed, Qatar

Client: Qatar Petroleum

EPIC of 3 nos. LPG Tanks & Conversion of existing 2 nos. Propane tanks to Butane storage tanks. LPG tank dia. 76.8m and Volume capacity 100,000Cu.m double wall refrigerated fixed roof storage tank. And also associated pipelines (16,000 number of Joint from dia. ½" to 48" and around 150,000 dia. Inch welding of various material).

Responsibility Delivered

 Preparation of Inspection testing procedures, preparation& qualification of WPS/PQR, Witnessing of Welder Qualification.
 Providing technical support, guide line to inspection team (Welding inspector, Painting Inspector, NDT inspector, Electrical Inspector, Civil Inspector, Instrumentation Inspector etc,), supervising and follow up of inspection team activities.
 Conducting QA/QC weekly meeting internally and attending of client quality review meeting.
 Project document review, design document review & drawing review related to mechanical part.
 Witnessing and coordinating all NDT (Vacuum box test, MT, UT) and PWHT associated with tank and piping. And radiography film interpretation for tank and pipelines.
 Static & rotating equipment leveling and alignment check during installation and erection. (Centrifugal Pump, Compressor, Pressure Vessels, heat exchangers etc.)
 Settlements check of tank foundation during water filling by Horizontal Inclinometer.
 Preparation of procedure for Hot tapping on live lines. Inspection and monitoring activities of hot tapping joint welding.
 Interpretation of various International codes and standards like ASME Sec V, VIII, IX, B31.3, B31.8, TEMA, NACE, BP 192 part 2, API 1104, API 620, API 650, API 653 etc.

Dec. 2000 – Nov 2002 Panorama Cont. & Engg. Services Doha, Qatar.

Client: Qatar Fertilizer Company (S.A.Q)

As plant Inspection Engineer

 Supplied as long term Plant Inspection Engineer to execute workshop & Plant welding activities as detailed below to ensure quality.
 Internal inspection of Boilers and other static equipment i.e. heat exchangers, Pressure Vessels during annual turn-around and in short shut downs and recommending the corrective actions wherever warranted.
 Periodic survey of thickness of equipment such as Columns, Vessels, Tanks etc and Piping systems using Ultrasonic thickness meters.
 Participation in preparation of inspection and Corrosion monitoring through computerized trending of thickness of all the equipment & piping.
 Provision of inspection management on integrity of Pipelines, Pressure Systems, Non Pressure Systems and Structures in accordance with relevant API codes like API 510, 570,574, etc.
 Temperature scanning of critical equipment such as reformer tubes, Furnaces, Ammonia storage tanks using Thermal imaging (Thermography) system and Pyrometers.
 Eddy current testing of in service Heat exchanger tubes during shutdowns to assess the condition of units and to determine the balance life.
 Recommending replacing of the units based on the inspection results during shutdowns.
 Ensures that all site inspection & corrosion management support requirements are dealt with promptly.
 Understanding the material suitability for the process medium and suggesting superior materials as and when required to improve the efficiency of the plants.
 Anticipating the expected corrosion mechanism and inspecting with the aid of advanced inspection methods like ultrasonic A-scan, B-Scan and IRIS inspection, etc.
 Developing standards and procedures for the management of integrity, inspection and corrosion management.
 Providing technical advice on inspection and corrosion matters, in support of relevant technical integrity issues.
 Testing of Pressure relief valves as per relevant API standards.
 Manage the multi discipline NDT and inspection personnel in the implementation of the facilities inspection plans.
 Identify and assessing business and HSE risk implications of inspection, corrosion and erosion issues and communicate relevant topics.
 Assure adherence to project quality control procedures and approves key documents as required.
 Preparation of check lists, schedules for inspection / NDT like thickness measurement of static equipment and pipeline, temperature measurement, Ultrasonic flaw detection, radiography, Dye Penetrant test, leak testing of heat exchangers and strippers and Magnetic Particle Testing based on operating conditions and fluids handled.
 Preparation, witness and development of WPS, PQR and WPQ for their workshop & Plant. Prepared 60 WPS and PQR for various material (CS, AS, SS, Super DSS, Inconel, Titanium etc.,) and in difference range of thickness in accordance with ASME Section IX.

Client: Qatar General Petroleum Corporation

EPIC of 18" MOL, 24" RAG/SAG & 8" Water pipe lines, S-2 station gas supply to QVC.
It involves approximately 25-km pipeline of 24" & 8" in Dukhan area and 30" station piping from S-2 station to QVC.

Client: Qatar General Petroleum Corporation

EPIC of 12" crossover pipe line for conservation of North field excess gas by injection into Arab D reservoir. Involving approximately 2 km 12" gasoline and 2" instrument airline and two-station piping.

Responsibilities Delivered

As QA/QC Engineer

 Prepared and developed WPS, PQR AND WPQ for various projects and for various materials (CS, AS, SS, Super DSS, Inconel, Titanium etc.,) in accordance with standard (ASME sec IX, B31.3, 31.8, BP 192-II, API 1104 etc.). Conducting welder qualification, monitoring of welder performance and providing welder training.
 Inspection of static equipment & pipe line by conducting LPT, Fluorescent LPT, MT, Fluorescent MT, RT, UT material analysis, hardness measurement, ferrite check and welding inspection.
 Stage wise welding inspection of static equipment and connected pipe lines, inspection of all static equipment like PV, HE, columns, reactors and connected pipe lines, furnace, boilers & storage tanks.
 Planning turn around inspection activities and coordinative and complete the job in time as per schedule.
.
 Interpretation of various International codes and standards like ASME Sec II, V, VIII, IX, B31.3, B31.8, TEMA, NACE, BP 192 part 2, API 1104, API 620, API 650, API 653 etc.

April 1995 to Nov 2000 Jayaram Engineering Works, Trichy, India.

Responsibilities Delivered

As QA / QC Engineer

 Responsible for preparation of weld map and monitoring all welding activities. Responsible for Implementation of Quality control procedures throughout the shop.
 Provided technical support to production team, Inspection of material traceability, joint preparation, fit-up and alignment for Pressure vessels, Heat exchangers, Columns, reactors, storage tanks, gates, feeders, dampers.
 Interpretation of various International codes and standards like ASME Sec II, V, VIII, IX, B31.3, B31.8, TEMA, NACE, BP 192 part 2, API 1104, API 620 etc.
 Responsible of monitoring electrode backing, welder performance, NDT records, and Post weld heat treatment records. Failure analysis and reliability study.
 Responsible for preparation of operation process sheet and preparation of all weld data sheet for nuclear Power Corporation projects.
 Implement of new techniques in all types of welding methods like SMAW, GTAW, FCAW, SAW, HOTFACING, CLADDING, OVERLAYING for all types of material to meet the code requirement.

Special Assignment
 Assigned as team leader in manufacturing RDE-40 (Aluminum Alloy) for Indian defense service, which includes all inspection activities like preparation of WPS for FCAW, Qualification of PQR and welders, preparation of welding sequence chat, load test & functional test of bridge, designing of fixtures for aluminium distortion and ageing of aluminium.
 And also experienced in manufacturing Rocket launching mechanism made of high strength low alloy steel for the same Indian defense.

1989 –1995 Quality Engineering works. Trichy. India

Responsibility Delivered

As Quality/ Welding Inspector

 Responsible for inspection of incoming material to final dispatch of components. Preparation of quality plan for pressure and Non-pressure parts in boilers.
 Responsible for preparation of WPS, PQR and all quality control procedure and NDT procedures.
 Responsible for preparation of all types of pipe and cone developments & Interpretation of drawings, Interpretation of weld symbols.
 Interpretation of drawings, Interpretation of weld symbols.
 Preparation of procedure and methods for casting welding, hard facing.
 Also experienced in casting repairing, valve machining and assembly inspection.
 Responsible for stage wise inspection of piping work from fit-up stage to test pack preparation.
 Familiar with piping codes API 1104 and ASME B 31.3 & also familiar with ASME VIII, IX, II, V.
 Responsible of monitoring electrode backing, welder performance, NDT records, and Post weld heat treatment records.

Special Assignments

 Assigned as Team leader for manufacturing and site erection of Hood assembly and skirt assembly for BOKARO Steel plant. Which include all procedure and welder qualification for all material involved in this including headers, stage wise and final inspection of the above.
 Assigned as team leader for manufacturing of pressure vessels and columns for COCHIN Refinery Limited. Which include all procedure qualification; all stage inspection, and final documentation.
 Also posted as Site Quality control inspector in the above plant from Aug. 1994 to May 1996 for installation of vessels and columns and carry out all required tests.

Projects: Windmill towers, Pressure vessels for BHEL, Heat exchanger for RIL and Ducts and Beams.

1988 to 1989 Bharat Heavy Electrical Ltd.(BHEL) Trichy. India
Trainee (Quality Control department).

 Inspection of Valves component and assembly, witnessing all types of valves hydraulic test and steam leak test.
 Calibration of all measuring instruments at calibration center.
 Hardness checking of seat ring of valves.
 Profile checking of tools by using microscopic profile checking instruments.
 Inspection & recording all inspection documents involving in the valve shop.
 Training in NDT technique in RT, UT, MT, PT and visual inspection.
 Responsible of monitoring NDT records and Post weld heat treatment records.
 Visual inspection of valves welding, and preparing history sheet for valve. Maintaining material trace ability record.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 6742)

Go to Search Parameters...

Brief Description

Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp

DSV with over 20 years experience.

I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California.

Involved for more than 19 yrs in structural work related to oil and gas industry. Basic/Detailed Engineering, Installation Engineering and integrity assessment of Fixed Offshore Structures (Both jacket and topsides). Familiar with structural analysis programs like SACS, ASAS, SESAM, GRLWEAP, etc.

Plant inspection: with API 510, 570, 653. adttional qualification in welding inspection

Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning

A dynamic professional with over 24 years of experience in Process Engineering, Process Enhancements, Quality Management Systems & Man Management; for petroleum refineries in India & Kuwait

Senior Pipe Stress Engineer

Upstream and mid-stream experience(27 years) plus underground waste water injection

Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design.

I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis.

I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea.

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Electrical and Instrument Project Execution, Installation and Estimating

Telecom field technicians Customer end

QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Bachler in Arts + 3 yeart Appranticship in Instrumentation and control

Experienced in Mechanical & Electrical Installation Of Equipments in Plastics & Petrochemical Industries

having 18 years of sound experience in Commissioning and design, with Bachelor degree

unigraphics designer drafter

Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

I am a diploma holder (3yrs course). Having wide knowledge on electrical / Instrumentation / process control panel board operation. Having 19+ year experience (includs 12yrs Oil and Gas plant). Looking for rotational jobs

Petroleum Engineer, Well Site Supervisor

13 yrs exp in oil industry with 6 yrs as a Geologist. Worked in different countries of Asia & Middle East with numerous clients. Experience in clastic, carbonate, & basement reservoirs, HTHP wells, horizontal drain with geosteering tools. Currently working as Wellsite Geologist for Total Yemen.

Seasoned and highly knowledgeable Mechanical Engineer with experience of leadership successes in the design, operation/optimization and construction of oil and gas production facilities (Well, artificial lift and gathering systems) Harnesses best-practice project management methodologies to steer m

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.

Reservoir, simukation and production engineer

Experience maintenance planner in oil and gas industry. Also has experience in quality control and inspection of materials and spare parts. Knowledge in MS Office applications and Maintenance Managment Computer System

Electrical Engineer Technician; 14 years experience; Master's Degree; Commissioning; Pre- commissioning; Inspection; Testing; National Electric Code

I am a mechanical & metallurgical engineer experienced in QMS ISO 9001:2000, internal auditing, welding, NDT, materials etc

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

Strong hold in Erection, Pre-Commissioning,Commissioning and start-up.

Managed the activities of two Draftspersons. Supported the International, Offshore and Onshore Divisions in Exploration and Land Departments. I created Structure and Isopach contour maps. Created Land maps with metes and bounds descriptions from leases. Created Cross Sections using well logs, montag

I have senior technician diploma from API ORAN (ALGERIA) my works experience is as follow: In the begining, I have worked for paints society since three years after I have change the society for SONATRACH after macking a test and Ibegin the new work as plant operator for one year, after as panelman

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out