Resume - Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, Powe...

Misco Jobs

Resume #6673

CONTACT INFORMATION:
View contact information...

EDUCATION:
B, Sc. Petroleum Engineering, July 1991 Cairo University.
Graduation Grade: Good

SPECIAL SKILLS:
- Process Design& Review.
- Review P& ID's.
- Computer Programs ( Excel, Word & PowerPoint )
- Training The Junior Process Engineers & Process Technicians.

RELEVANT EXPERIENCE:
Twelve Years In Oil Industry Covering The Following Areas:
- Monitor And Analyze The Technical Performance Of Off-Shore Oil And Gas Separation Process Including:
(The Operating Condition, Chemical Treatment, Laboratory Test Reports, Standard Log Sheets, Pipelines Pigging Operation, Equipment Performance & Economics).
- Studying, Identifying, Proposing And Troubleshooting Plant Performance Improvements.
- Off-Shore Oil And Gas Separation Process Commissioning And Start-Up.
- Process Design.
- Process Design Review.
- Review And Provide Comments And Feedback On Drawing ( Process Flow Diagram ) And P& ID's.
- Review Modifications & New Designs To Existing Plant To Make Sure That All Safety Requirements Are Considered To Ensure System Integrity.
- Using Process Simulation Package "PRO-II".
- Carry Out Risk Assessment, HAZOP and HAZID Studies With Operations & Safety Personal For Critical Activities Such As Plant Modifications, Start –Up And Shut Down Procedures.
- Arrange The Vendor Support For Resolving Complex Problems That Not Identified By Local Sources.
- Coordinate & Prepare Annual Operating Capital Budget Proposals And 5 Years Plan Budget.
- Comply With The Company Health, Safety & Environment As Well As Work Permits, Policies & Porcedures.
- Water Injection Plant With DCS Control System.

TRAINING COURSES:
Technical Courses:
1. Production Log Interpretation Workshop ( SCHLUMBERGER ).
2. Field Oil Processing & Water Treatment ( FIRST ).
3. Oil Field Processing & Gas Separation Operations & Design Principles ( FIRST ).
4. Water Injection ( OIL PLUS ).
5. Oil Handling ( ALLEN TANK ).
6. Operating Manual Review ( TECNOMARE )
7. Oily Water Treatment System ( SERCK BAKER )
8. Oil Water Treatment ( MEGGITT ENERGY ).
9. Operating And Monitoring Waterfloods (OGCI – CALGARY – CANADA)
10. RS3 Distributed Control System "DCS"( OIL PLUS ).
11. Orifice Calculations & Valve Sizing ( TARGET ENGINEERING ).
12. Measurement & Automatic Control System ( TARGET ENGINEERING ).
13. Oil Dehydration & Desalting ( FIRST ).
14. Corrosion Workshop ( FABRICATION STYDIES CENTER )
15. Types Of Artificial Lift (GESCO ).
16. Process Simulation "PRO II" ( ENPPI ).
17. Advanced Hydraulic Lift ( OILWELL HYDRAULICS ).
18. Advanced Production Engineering (GESCO).
Computer Courses:
1. Dos & Windows ( DPS ).
2. Windows NT For End Users ( IBM ).
3. PowerPoint 97 ( IBM ).
4. Access 97 ( IBM ).
5. Excel ( NEW HORIZONS ).
Safety Courses:
1. Basic Safety - General (SUEZ OIL INDUSTRIAL CO. ).
2. Safety Engineering & Risk Control - Basic (ENPPI ).
3. Personnal Safety & Rescue ( ARABIC ACADEMY).
4. Risk Assessment Mangement ( PETROSAFE ).
5. HSE Management & Loss Prevention ( PETROSAFE ).
Management Courses:
1. Technical Report Writing (MANAGEMENT & DEVELOPMENT CENTER ).
2. Creative Management ( GITRAC ).
3. Basic Managerial Skills ( TOTALITY ).
4. Effective Time Management (KMT).

English Courses:
1. English Language Courses –Advanced Level ( EL-MANNAR TRAINING CENTER ).

EMPLOYMENT HISTORY:
1992 – Till Now In Geisum Oil Company:
Duration: 2004 – Till Now
Position: Process Department Head In Cairo Office.
Duration: 2000 – 2004
Position: Process Section Head In Cairo Office.
Duration: 1997 –2000
Position: Senior Process Engineer In Cairo Office.
Duration: 1993 –1997
Position: Process Engineer In Geisum Oil Fields.
Duration: 1992 –1993
Position: Process Engineer In Cairo Office.

References will be provided on request.

MEMBERSHIP:
SPE & Egyptian Engineering Syndicate.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 6411)

Go to Search Parameters...

Brief Description

I would like to announce my availability to any professional company in need of a Senior HSE Officer with an Engineering and Medical Degree. My vast experience and capabilities and the ability to get along with people will prove to be an asset to the company, client and workers. As a professional,

Well-experienced instrument senior technician seeking a motivating position related to Construction, Commissioning and Maintenance applicable to industrial and OIL&GAS installations.

Offering Extensive Experience in Industrial Electrical/Instrument Equipment

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

QUALIFICATIONS : M.Sc. (Geology), Skill : Geologist, Mudlogger, Geotechnical Engineer

28 years experience in drilling fluids onshore and offshore across 4 continents. Fully experienced in both field engineering and office supervisory/management posts. IWCF Combined Surface/Subsea Supervisor well control certificate.

Working experience in Chemical plants with private sector and foreign organizations. Worked at ¡§Honeywell DCS TDC 3000¡¨ controlled Urea & Ammonia plants, FFC and ¡§Foxboro DCS¡¨ controlled Urea plant, Indonesia.

I know I would be the correct candidate because; I have never met a challenge that I could not solve, resolve, or find a solution to in an accurate and timely manner. I am a quality engineer with over 15 years experience in the automotive field alone.

13 years of Experience in DCS System, PLC & ESD system as well as field instrumentation.

Ph.D. in materials science and engineering, four year experience in teaching, five year experience in working in various industries. Fields of specialty; corrosion, coating, materials selection

* Over 11 years of experience in areas of Process Automation Engineering & Instrumentation.* Hands-on experience in Automation Engineering, estimation, design, installation & maintenance of equipments in India & Abroad.Expertise in advanced PLC, systems & providing technical support on Instruments.

DEsign Engg., PLC, SCADA, I&C work Experience

Skills include Petroleum Engineering,reservoir Engineering,Petroelum Geoscience,Geochemist,Mud Logging

I have recently completed M. Sc. in Petroleum Technology, from University of Karachi.

Pipe rack design, routing of pipes on rack, Preparation of Tank farm Layout in detail and piping layout for the same from the process point of view. Preparation of detailed piping layout, Equipment layout, General Arrangement drawings, Isometric checking.Isometric drawing preparation

Cogeneration, gas engines

• Results-driven, logical and methodical approach to achieving tasks and objectives

Free! I am a geology masters student at Baylor University (May 2009 graduation). My training has included all of the basic geological branches with focus on sequence stratigraphy, depositional systems (both carbonate and clastic), and isotope geochemistry.

2.6 year of experience in Detailed Engineering work of the refinery units helped me understand the profile and the responsibilities of a mechanical engineer (Static) and to realize how important this field is to the oil refining business and I have learned how important it is to be flexible.

Highly personable Drilling Fluids Engineer with over three years of experience in laboratory work, project supervision, logistic services both air and land logistics and mud engineering.• Proficient with Microsoft Office System (including Microsoft Word, Microsoft Excel, Microsoft PowerPoint®, Micro

Project Planning & Control Engineer / Scheduler / Earned Value System Designing and Development/Primavera Group Software Developer/I have been working in Engineering and Construction phases of EPC oil, gas and petrochemical projects/PMP (Project Management Professional)/Project Planning & Control

Senior Mechanical / Piping / Materials Handling / Pneumatic Design Specialist, Checker, Design Supervisor & Project Manager

A chemical process engineer with 12 years experience in oil refining and petrochemical industries

Has served as Supervisor (Mechanical) during shutdown in KNPC, Kuwait and FERTIL, Abu Dhabi. Has experience in the maintenance of Rotary Machinery like pumps, compressors, turbines, etc. and stationery equipments like heat exchangers, columns, vessels and piping. Has computer knowledge.

Skilled in all planning shutdown, shutdown supervision, servicing, modifications design and total project cost control, mainly in power stations and refineries

Pipeline, Pipe Stress, Piping or MEchanical Engineer

Process Design & Review , Review P & ID’s , Computer Programs (Excel, Word, PowerPoint), Training The Junior Process Engineers & Process Technicians

Over 18 years of experience with reputed international companies with Sadaf , Ibn Zahr , Flour Daniel ,Deutsche Babcock, in important positions like Mechanical Engineer, Principal Engineer, Mechanical Superintendentposition in Engineering, Project and Construction Management.

OBJECTIVE A challenging position in managerial level QUALIFICATION FOR THE JOB Good education and fully experienced with engineering and management duties,, have initiative and willing to accept engineering responsibilities.

: PROJECT ENGINEER //SENIOR ENGINEER /ELECTRICAL -- ENGG./(DESIGNS)/PROC./CONSTRUCTION/SUPN./O & M OIL/GAS/PETROCHEMICAL INDUSTRIES ETC.

cnc turn mill machinist setter

JR. PDS DESIGNER PIPING WORKING FOR WELLCOMPANY IN MUMBAI ON PDS FOR PIPING. GOOD EXPERIANCE OF PIPING.REFER DETAIL BIODATA.

This is the Drafts man C.V for Zueitina Oil Company, Libia.

PROCESS ENGINEERING OF OIL AND GAS PROJECTS

OBJECTIVE To secure a position with a corporation wherein I can apply the skills, knowledge and expertise obtained during my 18 years in the Health & Safety and Emergency Response fields.

I’m a civil engineer with studies in HSEQ, I have worked at Cusiana and Cupiagua Oil and Gas CPFs, I have been working for the past 6 years in HSEQ areas an I´m free to go wherever the job is. I speak Spanish as a mother tongue and have good English skills.

Application for the post of Control & Instrumentation Engineer. post graduate in Instrumentation engineering having more than 9 years of experience in automation Oil & Gas, Petrochemical and Fertilizers projects.

Senior Structural Designer in the Oil and Gas industry with experience of PDMS, Micro station and AutoCAD

• Drilling Engineer - Oil and Gas Drilling Wells Planning; • Rig operations experience; • GPS units, GIS’s methods and procedures; • Manage/coordinate teams of 15+; • Software programming knowledge and experience.

I am a Mechanical engineering diploma holder, over 15 years of experience with CSWIP Plant Inspector, CSWIP 3.2, AWS CWI and ASNT LEVEL II in RT, UT & MT, with valid UAE driving license.

Setup PDMS, customize PDMS program in PML I and II to greatly reduce man-hours. Piping designer, draftsmen, produce drawings, model pipe support and routed piping systems. Train others on PDMS software.

Process engineer, Sharif Institute of Technology, B.Sc. Degree, Tehran University, Equipment design, Takestan Industrial Systems Company, Well Engineer, Integrated Project Management, Schlumberger Company, Heriot Watt University, Student of Petroleum Engineering, Voluntary work in Indonesia and Iran

Looking for position of Lead Engineer of Rotating equipment in Design, Engineering and Construction organisations.

Total Eight and half years of Engineering, Commissioning and Maintenance experience of DCS/PLC in a petrochemical industry

Discipline leadership and management. Ten years experience in Oil, Gas, and Industrial Instrumentation and Control. Client based engineering experience. Major Projects include FEED, detailed design, construction, testing, commissioning of onshore and offshore facilities. Capital works projects.

look at next resume

Assembles and installing conduit wire, power cables. Install control and distribution apparatus. Read labels manuals and schematic diagrams. Install electrical motors (0.25-850 kW). Work with power tools and measuring instruments.

INTOOLS, Instrument Data Sheets,Sizing Calculations,Wiring,Hook-ups,Loop Drawings,I/O list,Bid Evaluation,Review of Vendor Documents/Drwgs,FAT Inspection,

Result driven professional with over 4 years of experience in Project Management, Programming, Instrumentation, Software Development and MES / PLC / SCADA Implementation.

Chemical Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out