Resume - Gas turbine systems technician

Misco Jobs

Resume #66880

CONTACT INFORMATION:
View contact information...

Gas Turbine System Technician, Mechanical
Navy: Inactive Reserve
Status: Public

CAREER SUMMARY
Operates, repairs, and performs maintenance on mechanical components of gas turbine engines, main propulsion machinery, auxiliary equipment, and propulsion control systems. Troubleshoots and performs maintenance on hydraulic, electrical, and propulsion systems of a gas turbine; uses schematic diagrams, drawings, charts, and blueprints; fabricates and installs both high-and low-pressure tubing and hose; maintains logs and records; uses computer software. Repairs hydraulic system components and pneumatic/hydraulic systems; repairs and maintains low-pressure air compressors, and gas turbine reduction gear clutching assemblies; tests propulsion fuels and lubricants; makes pitch and valve adjustments; replaces seal rings; overhauls pumps; prepares and maintains daily fuel and water reports; requisitions supplies and equipment; operates propulsion console equipment.

OBJECTIVE
I have strong believes in good work ethic and pride in my work. i have been to mechanical engineering school, firefighting school. i have certificates for engineering naval courses and am currently working on my associates degree for mechanical engineering. i am a junior petty officer that sets high standards and am always looking for ways to gain knowledge and make myself a more valuble asset to any career i occupy. i am charge of maintenance and preservation of 2 lm2500 ge gas turbine engine, a dreeser rand 125 psi single stage compressor, 2 centrifugal type pumps,6 screw type pumps, one allison k34 gas turbine generator, seawater strainers, main reduction gear, control reversable pitch hydraulic oil system, among other associated macinery.

EDUCATION High School.

WORK EXPERIENCE 11/2002 - 11/2007
GAS TURBINE MECHANIC/ENGINE ROOM OPERATOR
USS STETHEM DDG 63, YOKOSUKA, Japan.
I am charge of maintenance and preservation of 2 lm2500 ge gas turbine engine, a dreeser rand 125 psi single stage compressor, 2 centrifugal type pumps,6 screw type pumps, one allison k34 gas turbine generator, seawater strainers, main reduction gear, control reversable pitch hydraulic oil system, among other associated macinery.

AFFILIATIONS 4/2007 - 4/2007
UNITED STATES NAVY, PETTY OFFICER SECOND CLASS

SKILLS MICROSOFT WORD/ OFFICE
Skill Level: Intermediate
Experience: 4 years

MICROSOFT WORD/ OFFICE
Skill Level: Intermediate
Experience: 4 years

REFERENCES Not Available.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 6411)

Go to Search Parameters...

Brief Description

EOM Steam Turbine Testing Supervisor, Worldwide Co. Service Rep, Schedule, Plan, Assign Personel, Execute, Document, Vibration/Temperature Analysis- Install, Commission, Overhaul- Generator, Switchgear, Pump, Gear, Compressor, Expansion Turbine, Electronics, Telemetry, Condenser, Boiler, Superheater

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Maintenance Engineer

Total experience of 5 years in industrial sector which includes refineries and valve manufacturing companies.

I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11

Bs.D Qualified Mechanical Egnineer Experienced in Piping and Pipeline Construction and Precommissioning

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA, QATAR IN CONSTRUCTION AND SHUTDOWN PROJECTS - OIL AND GAS.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).

Interested in knowing available oppurtunities awaiting.

Licensed Land Surveyor 27 years experience

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

Principal/Lead Mechanical Engineer; Specialist consultant for rotating equipment; FEED, DBM and detail engineering in EPC; Pumps, Compressors and Turbines. Oil & Gas, Petrochemical, Municipal, Energy, Offshore / Marine

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

project management.contract management,business management.

4th Class Power Engineering Certificate and 3rd Class Power Engineening Part A1-A2

Seeking Employment in Oil and Gas Industry

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

Gas turbine systems technician

Total of 5years experience in Quality control, Welding, Heat treatment & NDT field a QC in EPC sector

Project enginer with 5 yrs experiece

Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related

Microstation CADD Civil Engineer Utilities Specialist and GIS

A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines.

Mechanical Engineering Technician, MS Project, Premavera, Auto-CAD, SAP, Microstation, Planning , Maintenance

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out