Resume - Having an Overall inspection experience of 9 years in the Paint Industry and Con...

Misco Jobs

Resume #66933

CONTACT INFORMATION:
View contact information...

Carrier Summary
Exclusive Quality Control Inspection inclusive of monitoring the surface preparation and shop coating as well as field paintings as per all relevant ISO standards.

Familiar in Corrosion Auditing, Painting Systems Recommendation, On Site Trial Performance, QAP Preparation, Paint defects, Trouble shooting and specialized coatings like Zinc Spray and Plural Component Spray.

Familiar with different type of coating systems like Zinc Silicate, Tank Liners, Heat Resistant Coatings, Wrapping Coating, Polyurethane Fusion Bonded Epoxy (FBE), Novalac Epoxy, Solventless Epoxy and other various type of Epoxies.

Supervision & Monitoring of sub-contractor Work force, Conducting Quality Audits, Witnessing, Reviewing and certifying all QA/QC documents, Site Procedures, and relevant codes of construction applicable to the projects.

Education
B.Tech [Chemical] from Anna University
Diploma in Chemical Technology with First Class
Certification
NACE Coating Inspector from NACE, USA - NACE CIP # 15469
Recent trends in Surface Technology from CECRI Karaikudi
Water treatment Technology from CECRI Karaikudi

Training and Development
* Robot Application and wet coating new technology @ Wagner -- Germany
* Undergone training on ISO9000 and ISO 14000 EMS systems @ TAFE
* Undergone TWO days training on PLANNED MAINTENANCE conducted by
CII – Faculty Mr. Yamakutchi From Japan @ TAFE
* National Seminar on Global Trends in Manufacturing Technology @ Anna
University
* National Seminar on Global Warming @Anna University
* Team Excellence through " Interpersonal Skills" @ TAFE Limited
Personal details Age & Date of Birth: 27 Years, 21.04.1979

Nationality: Indian

Marital Status: Unmarried

E-Mail: arun3kumar00 @ yahoo.com

Passport: A-5417479

Languages Known: English, Tamil - R, W, S
Telugu – S
Permanent Address: 1273/6 Indira Nagar
Lakshmipuram(Post)
Kovilpatti.628 502
Tamilnadu
Job Profile Aug 2007 to Till Date
1. M/s Sungchang & Abdullah Al-Shaikh contracting Co.Ltd,
Kingdom of Saudi Arabia
QC Dept. as Coating Inspector.
Responsibility:
Responsible for the total Quality control of surface preparation, Coating application to the Pipes, Spools for ARAMCO –ABQ GOSP -3 Modification Projects, Final Inspection & Acceptance.
Attend the daily/weekly meetings related to QC activities and scheduling of works.
In process inspection to assure clients that all specified aspects of a coating project are properly completed. Inspections typically include all quality aspects of a project ambient condition surface preparation & application through to final acceptance of the project.
Supervision and monitoring of sub contractor work force reviewing and certifying all QA/QC documents, site procedures, relevant codes of construction applicable to the projects.
Co-ordination with the third party inspection as well as client inspection as per the Project Specifications & Standards.
Co-Ordinate with client and sub contractors on daily basis to resolve any Quality issues.

Prepare Quality reports & job acceptance documents for project documentation

December 2002 to July 2007
2.M/s Kansai Nerolac Paints Ltd Technical Services Dept. as Sr.Officer – (Technical
Service & Field Inspection)
Responsibility:
Job responsibilities includes site coating inspection, on-site trail performance, corrosion auditing, system recommendation and handled the site inspections as well as technical services for the following

* Mangalore Refinery and Petrochemical Ltd (ONGC)-New Xylene Plant Painting
* Mangalore Refinery and petrochemical Ltd (ONGC)-Jetty Loading arm Painting
* Mangalore Refinery and Petrochemical (ONGC) - Maintenance Painting-
* Indian Oil Corporation (IOCL) - Product Storage tank Painting- Chennai
* Hindustan Petroleum (HPCL) - Fire water line painting- Chennai
* Bharat Petroleum (BPCL)- Maintenance Painting-Chennai
* Madras Fertilizer Corporation Ltd (MFL) -Maintenance painting-Mangalore
* Enercon (Germany) wind mill Tower Painting - Larsen & Toubro Workshop
Kanchipuram.Chennai.
* NEG-MICON (Denmark) wind mill Tower Painting- Larsen & Toubro Workshop.
Kanchipuram,Chennai and Trichy
* Vizag Seaport - Stacker Reclaimer Painting- Larsen & Toubro Workshop.
Kanchipuram, Chennai.
* Sterlite Copper Plant - Maintenance Painting –Tuticorin

* Inspection of Paint plant processes & Painted Parts Both Metal (Ferrous & Non
Ferrous) and Plastic components

September 1998–November 2002

1. M/s Tractors And Farm Equipment Limited [Manufacturers of Massey Ferguson and
TAFE Tractors
Responsibility:
* Monitoring product quality of supply parts and regular supplier line audits for continuous
Product quality / system improvements
* To achieve the production target with the required quality standard.
* Inspection and auditing of finished parts and initiate corrective action.
* Monitoring of Paint laboratory and preparing Work Instructions for New Product.
* Participation in supplier source & maintain supplier PPM performance report.
* Decide on operating ranges for all parameters that affect quality of Paint finish & maintain them as per Statistical Process Control (SPC)
* Checking of all Quality parameters inline with ASTM and MF (Massey Ferguson)
* Interact closely with several Cross function teams for System related problems
* Coordinate for the successful launching of new products.

Dry Film Thickness - DFT Gauge, Electro magnetic Gauge etc.
Adhesion Test - Tape pulling (Cross Hatch & X Cut)
Petrol Resistance Test - Petrol wiping
Pencil Hardness - 3B to 6H pencils
Salt spray Resistance - Salt spray chamber
Weathering Test - Humidity Chamber
DOI - DOI meter
Gloss level - Gloss meter
Pigment Grade test - Hegman Gauge
Impact & abrasion test - Impact tester
UV Resistance - QUV meter
Film Flexibility Test - Conical Mandrel

And Colour meter (l, a, b Value), Water pH & conductivity meter etc.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 6635)

Go to Search Parameters...

Brief Description

Project engineerig

Worked as Civil/Structural desgner and piping as well. Perform basic design calculation, planning, scheduling, project evaluation, specifications, bill of materials & cost estimates.

Transmission Engineer for Fiber Optics, Microwave & VSAT System w/ 20 yrs experience

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

PIPING STRESS ENGINEER

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Project Planner/Scheduler/Controller with experience in the oil & gas, EPC and Construction industry. Involved in Planning, Scheduling, Project and Cost Control.

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.

Reservoir and Production Engineer

yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC

I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.

wireline specialist and downhole gauges engineer

Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

Managing operations, especially in technical management, supervising and engineering of all aspects and activities in petroleum up-stream operations.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)

Corporate QA Engineer

Process Engineer working with DSM(Work Exp. 5 years)

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out