Resume - Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Ele...

Misco Jobs

Resume #6696

CONTACT INFORMATION:
View contact information...

Institutions Attended with dates:
* 1979 – 1982 South Tyneside College South Shields Tyne and Wear England
* 1976 – 1978 The Polytechnic Ibadan Oyo State Nigeria
* 1971 – 1975 Bishop Dimieari Grammar School Yenagoa Bayelsa State

Degrees and Grades obtained with dates:
Dec 1998 City & Guilds of London Institute Full Technological Certificate Electrical Technician's
* Control Systems and Applications Pass 1981
* Special Application (Marine Electronics) Pass 1981

July 1982 (TEC) – Higher Technician Certificate – Electrical Engineering
(Total Listed Grades 10)

Dec 1981 City & Guilds of London Institute Electrical Technician's Part III
* Control Systems and Applications Pass 1981
* Special Applications ( Marine Electronics ) Pass 1981

May / June 1980 City & Guilds of London Institute Electrical Technician Part II
*Testing methods ( Power & Reliability ) Pass 1980
*Electrical Power Equipment Pass 1980
*Special Technique ( Marine Electrical plant ) Credit 1980

1976 – 1978 Ordinary National Diploma – Electrical Engrg. Pass 1978

1971 – 1975: WAEC School Certificate / GCE
First Division June 1975

Supplementary Certificates
1979 – 1980 Merchant Navy Training Board ( UK)
Advanced Marine Electronics – Instrumentation & Control for Engineer and Electrical
Officers: Advanced *Intermediate * Basic

Stcw ' 95 Courses
2002 Basic Fire fighting * Personal Safety & social Responsibilities*Medical first Aid
* Personal Survival At Sea

Safety Courses
2003 Permit to work *Gas Detection in confined spaces * Slinger and Banksman

Technology Skills
* Pc Hardware & Software installation / Trouble Shooting
* Operating Systems installation & trouble shooting
* Pc Maintenance & Networking
* General use of Computers

Post Qualification Experience
Summary of Experience

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing, Installation, Fault Finding, Conversion, Modification, Commissioning, Surveying, Repair, Running And Maintenance Of Complex And Sophisticated Ship Machinery.

Worked Ashore For About Two Years With Various Organisations: Dredging, Banking Automation, Salt Processing And Semi Conductor Plant

Areas Of Effectiveness:
Propulsion:
Power Generation, Transmission Distribution, Consumption And Utilization Of Electricity Hv/Mv/Lv 440/6600 Volts With Pms (6.6kv/4375kva) Boilers, Motors- Ac/Dc, Pumps (Automation System), Heaters,Bowthruster, Autoviscosity Control System, Oily Bilge Separators, Electro-Pneumatics, Manual/ Control Valves, Actuators, Regulators, Vessel Management System, Cmms, Plc., Dcs, Scada Etc.
6
Deck & Cargo:
Winches, Windlasses, Cranes, Cargo-Hold Ventilation Fans, Hatch- Covers (Electro Hydraulic), Tanker Cargo Handling Operational Equipment Power Take-Off System, Refrigeration And Reliquifaction Conrol Systems For Lpg Plants - ( Fso). Process Plant Operations- (Fpso): Hv Soft Starters (Solcon)-Water Injection Pumps (6.6kv/1680kw) / Booster Compressors (6.6kv/945kw ), Gas Compressors

Navigation & Communication:
Electronic Navigation Aids, Auto-Pilot & Steering System Radar, Pa System Telephones (Pabx), Vsat, Computer Networking

Domestic:
Lighting System Of The Ship, Ups-( 60kva / 10kva) Cold Room, Hvac, Catering / Laundry Services, Lifts, Sewage Treatment Plant, Water Evaporation & Distilling Plant, Incinerator, Ro/Di

Management, Training & Supervision:
Preparation /Implementation Of Preventive & Routine Maintenance Schedules For Juniors, Trainees & Cadets For Plant Equipment Installation Maintenance, Daily Troubleshooting, Process Improvement & Cost Saving Projects As Required. Liase With Shore-Based Company Superintendents In Matters Affecting The Operation & Running Of All Electrical Machinery On Board The Ship. Supervision Of Shore-Based Contractors Handling Jobs On Board. Assist Whenever Necessary The Chief Engineer In Matters Affecting The Overall Safety Of The Ship. Preparation Of End Voyage Reports Covering Inventory / Spare Parts Control & The Overall Performance Of All Electrical Machinery Aboard.

Safety & Surveys:
Fire Detection /Protection, Fire Fighting, Co2 Flooding System, Deluge System (Esd Fire And Gas/Psd) Shut Down Systems. Surveying For Class Requirement. Dry Docking
Employment History
9/02- Present: Prosafe Productions Pte Ltd 1 Intl Business Park # 10-01 The Synergy
Singapore 609917
Electrical Technician: Responsible For Hv Switch Gear – Perform
Diagnostic, Testing & Maintenance Functions –Hv/Mv /Lv Equipment.
Hv Ac / Refrigeration System. Oil & Gas Process Plant Operations.
Part Of Commissioning Team/ Sailing Crew Of " Abo Fpso"

4/2002 – 8/2002 Maritec Nv Belgium – c/o Eres Bitumen Nv (Nig.) Ltd., 10a Cooper Rd., Ikoyi, Lagos.

Electrical Officer
Maintenance Of All Electrical Machinery On Board – (Tanker Vessel)

9/2001 – 2/2002 Magellan Transport Services – 19 Adele Road, Apapa, Lagos, Nigeria

Electrical Officer
Maintenance Of All Electrical Machinery On Board – (Tanker Vessel)

8/99 – 2/2000 Gulf Manning Services – 14 Creek Road Apapa – Lagos.

Assistant Electrical Engineer
Worked With Electrical Engineer On All Routine Maintenance Jobs:
(Chevron Escravos Lpg Fso)

12/97 – 2/ 99 The Islamic Republic Of Iran Shipping Lines – Nioc Building 4th Floor, 4 Victoria Street,
London. Sw1 One England.

Electrical Engineer Officer 1
Maintenance Of Electrical & Hydraulic Machinery On Board.

9/96 – 9/97 Westminster Dredging Nig. Ltd. – P.O. Box 145, Warri Delta State

Electrical Superintendent
Responsible For Overseeing All Onshore / Afloat Installations/ Running & Maintenance,
Hvac, Precomission & Commissioning Of Instrumentation, Electrical Installation In
Residential Areas, Electrical Installations In Off Site Areas, Supervision Of Staff /
Subcontractor Activities, Safety / Surveying For: Generator Sets, Marine Crafts, Tug Boats,
Off-Shore Supply Vessels, Etc.

12/95 – 02/ 96 Arribond Suite 001, 8th Floor, Great Nigeria House, 47/ 57 Martins Street, Lagos.

Electrical Engineer
In Charge Of Installation, Servicing And Maintenance Of Automatic Currency Binding
Machine.

4/95 – 7/95 Columbia Int'l Ltd. Salt Processing Division Plot I303a Akin Adesola Street, Victoria
Island, P.O.Box 50870, Falomo, Ikoyi, Lagos.

Electrical Engineer
Responsible For All Electrical Prime Movers And Electrical Control Systems Eg. Bucket
Elevators, Screw Conveyors, Hammer Mills, Hot Air Generator, Air Compressors Etc.
Building On Existing Maintenance Practice And Establishing Improved Engineering
Systems.

3/92 – 12/92 Perbadanan Nasional Shipping Line Berhad – P.O.Box 10457 Jalan Raja Laut 50714 Kuala
Lumpur, Malaysia.

Electrical Engineer:
In Charge Of Maintenance Of All Electrical Machinery (Tanker Vessel).

7/91 – 01/92 Astron Technology Int'l Company Limited – A14 15/F Kailey Industrial Centre, 12 Fung
Yip Street, Chaiwan Hong Kong.

Plant Senior Facility Engineer: Responsible For Construction Project Management,
Operation & Maintenance Of Hvac System, Ro/Di Water Systems, Electrical Installation &
Other Plant Facilities System.

5/89 – 8/90 Neptune Ship Management Services (Pte) Limited, 456 Alexandria Road, #15-00 Nol
Building Singapore 0511.

Senior/ Junior Electrical Engineer:
In Charge Of Maintenance Of All Electrical Machinery & Refrigerated Containers.

7/88 – 3/89 Nigerian Green Lines Limited – 24 St. Mary Axe Baltic Exchange Chambers London Ec34
8en England

Electrical Engineer:
In Charge Of Maintenance Of All Electrical Machinery & Refrigerated Containers.

11/ 79 – 7/88 Nigerian National Shipping Line Ltd. – c/o National Maritime Authority 4 Burma Road
Apapa Nigeria.

1/83 – 7/88 Electrical Officer/Asst Electrical Officer/ Trainee Electrical Officer
In Charge Of Maintenance of All Electrical Machinery & Refrigerated Containers.

References: Furnished upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1451 to 1500 of 6635)

Go to Search Parameters...

Brief Description

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

xsteel detailer/checker

I possess a BS in petroleum engineering, and ten years of work experience with Core Laboratories as Special Core Analyst (SCAL), duties including: performing laboratory analyses of petrophysical and fluid flow properties, coordinating projects, data evaluating, and report generation.

MAINTENNCE SUPERVISOR /ENGINEER/ CORDINATOR/ MANAGER

M.E. (Welding Engineering),

Production optimisation,workover, well test,drilling

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

Professional DCS expert with 8 Years experience in process automation projects for pharma, oil & gas sector, Lead engineering and Project Engineering experience.

Mud engineer

Designer (In J Ray McDermott Engineering Services Private Limited, Chennai, From Aug. 2007 to Jul.2008

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling

TO BE ASSOCIATED WITH AN ORGANISATION THAT PROVIDES CHALLENGES APPROPRIATE TO MY CORE SKILLS IN AN ENVIRONMENT THAT NATURES AND PROMOTES A CULTURE OF CONTINUOUS LEARNING AND GROWTH

Process Engineer

I worked five years of the oil field to the national company of geophysics (ENAGEO) in south of Algeria as land surveyor engineer and two years of the mining field to the company of the barite mines (SOMIBAR) in north of Algeria as engineer surveyor

Educational Qualifications:1. Master of Technology in IndustrialSafety Engineering from NIT, Trichy with 85% marks (8.5 CGPA) 2. B.E in Mechanical Engineering with 81.77%. Experinece: 1. From August 2006 to till now - Working as Safety Engineer in Mina Abdullah Refinery of KNPC

GIS Consultant

Instrument & Control System Design Engineer

I had worked as Development & Design Engineer in Jordan Petroleum Refinery for several years .My work includes Design of static and rotary equipment according to international codes.Also Im holding Master degree in mechanical Engineering that gives advantage to go through research and development.

Analytical Chemist in the field of QA/QC/R&D for Beverage and Water Treatment

Sr. Engineering Technician with 15+ years of industry experience at both Regional and Corporate levels. Highly proficient with Aries and Microsoft Office as well as an IT background.

Business Analyst-Information Technology

ATTENDING BREAKDOWNS IN PLANTS

6 yrs exp.in fired heaters of peroleum .involved in design /documentation & cordination with other discplines

Geologist with a very strong experience in most of the oil/gas drilling operations

More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct

Freelance since 1999, I have gained wide Drilling Fluids experience. Also, I have worked for many Fluids Service Companies and gained good knowledge of their products.

I am more than 10 yrs experienced in major Power, Telecom and steel (Electrical design of Briquette Plant) industry.

I am certified paiting inspector certified from BGAS/CSWIP and NACE and about 10 years experience in oil and gas blasting and painting i worked in EGYPT, SAUDIA ARABIA, NIGERIA, KUWAIT

Drilling fluids engineer since 2001 , IOSH certified ( managing safely , IWCF certified

I have extensive experience with coal and biomass gasification. Also, I have experience with working with catalysts in reforming and fischer tropsch synthesis. I have completed a life cycle analysis and compared latest technologies for producing alternative transportation fuels.

As a management team member of major oil & gas company, involved design, Development, manufacturing and Testing. As a member of Quality Management system conducting and participating in internal and external quality audits. With over 10years of experience, using computer application in the workplace

Material Control \ QA/QC Inspector

A dynamic profesional with over 17 years of enriched expertise in the arenas of Projects, Installation, Erection & Commissioning, Operations & Maintenance & Plant Operations.

Gas Turbine Repair Engineer

B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),

B. Sc. Chemistry (Grade Good)

16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.

Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 [ 30 ] 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out