Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #67047
next resume »»
CONTACT INFORMATION:
View contact information...
EDUCATION:
TERTIARY: State Technical University P.O.Suchogo, Gomel, Belarus, http://www.gstu.gomel.by/newsite/eng/index.htm
Electronics Engineer
1990-1996 years
Assessed SRSS SA, Australian Bachelor Degree
SECONDARY: Secondary professional technical school N79, Gomel, Belarus
Machinery man skilled to work as locksmith of control measuring units and automatic,
1984-1985 years
Assessed SRSS SA, Australian AQF Diploma
EMPLOYMENT HISTORY
PERIOD: July 2004- October 2007
COMPANY: Marine Safety Services FZC, Fujairah, UAE
TYPE OF COMPANY: Ships Automation and Instrumentation
POSITION: Electrical Engineer
RESPONSIBILITIES: Repair equipment on board of ship: Oil tankers, LPG, cargo vessel, service boats. Electric and electronic equipment: switching and protective units in A.C. and D.C. circuits, distribution, starter and safety panels, generators, repair and modifying.
* Installation new steering system and connection with Bridge steering stand.
* Modifying and installation new boiler automatic and protection system
* Installation new generators A.V.R. and commissioning it for parallel works, as well safety system for engine
* Installation equipment in hazardous area, pump room gas monitors system
ACHIEVEMENTS: Supervisor Electrical Engineer
PERIOD: April 2001-July 2004
COMPANY: Company "Podvodsibstroy", Surgut, Russia
Multi Group International, Ajman, U.A.E.
TYPE OF COMPANY: Dredger works for gas-main lines across the river.
POSITION: Electrical Engineer
RESPONSIBILITIES: Electric and electronic equipment: switching and protective units in A.C. and D.C. circuits of distribution gears, motor and generator, air condition, ventilation, system of navigation and wireless equipment, communication.
PERIOD: January 2000-November 2000
COMPANY: Unitary Enterprise "Orient" Gomel, Belarus.
TYPE OF COMPANY: Telecommunications
POSITION: Electronics Engineer
RESPONSIBILITIES: Mounting, start up and repair of equipment of radio communication Motorola: radio stations, re-transmitters, antenna-feeder devices. Repair and adjusting the radio communication facilities: radio stations - GP68, P110, GP300, GM300, GM350, and re-transmitters - GR300, GR500, power supply units, and chargers.
PERIOD: September 1997- January 2000
POSITION: Engineer of control measuring units and automations.
Start up the apparatuses for registration of thermal power, apparatuses and automations.
PERIOD: February 1988 - August 1997
POSITION: Adjuster of control measuring apparatuses and automations
Maintenance electric and electronic equipment of: galvanics, automatic of safety of equipment of boiler-room, automatic system of ventilation, system of control at contents LEL of dangerous gases, equipment of neutralize chemical water.
REFERENCES:
Will be provided
OTHER INTERESTS / HOBBIES:
Family, Sport (Athletics, Cycling), Music, Fishing
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1501 to 1550 of 6411)
Go to Search Parameters...
Brief Description
Reservoir and Production Engineer
yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC
I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.
wireline specialist and downhole gauges engineer
Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.
Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.
I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them
Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,
For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.
Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.
Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment
Facility Engineer for oil and gas
Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.
I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.
Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra
Instrrumentation design, detailed engineering, procurement, construction, commissioning
Experienced in Oil and gas projects.
Time served Electrical Engineer with 16th Edition qualification.
Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.
4years experience as a Rig Electrician, primarily in the onshore drilling - production industry. I have a strong background in power generation of up to 600 VAC in engine generator sets of up to 5 for parallel use: CAT-KATO.
Skilled in using Hysys, Microsoft Office , VBA, AutoCAD, RSI Indiss, Somcon X;2. Ordinary in using ASP, HTML , C/C++, Visio, VB, CS3000, TDC3000, PKS, petrochemical process operation .
My experience include but not are not limited to ensuring and maintaining healthy, incident and injury-free environment, as well as implementing the company’s safety policies and procedures.
B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.
Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.
PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.
To work for a company in the petroleum/oil field that allows professional and personal growth.
A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.
Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.
I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.
Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.
Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)
Corporate QA Engineer
Process Engineer working with DSM(Work Exp. 5 years)
PRODUCTION CHEMISTAND FLUID BEHAVIOR SPECIALIST WITH VAST EXPERIENCE IN FLOW ASSURANCE STUDIES
my skills are coating inspector,piping inspector, welding inspector n have various ndt certificates
Diagnostic by analysis vibration, balancing, alignment, Control by infrared thermography, Intallation of on-line systems
VARIOUS FIELDS OF INSTRUMENTATION AND PROCESS AUTOMATION, COMMISSONING, PROJECTS
Cementing and stimulation engineer with previous experience as field engineer, sales engineer, and in-house coordinator.
Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis
ASNT NDT LEVEL 3, INSPECTION ENGINEER ,WELDING INSPECTOR,PAINTING INSPECTOR
High Voltage Electrical Testing and Commissioning and Electrical Start-up
I have worked as a Contracts Engineer in both Drilling and Production for more than 20 years, primarily for Shell and Esso. Recently I moved back to Canada after working overseas for 17 years. I am now looking for either ad-hoc or rotational work either in Canada or internationally.
A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering
BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.
Free!
Strong skills, working knowledge, and extensive experience in Petrography, Structural Geology, Geologic Mapping, Mineral Exploration, and Remote Sensing.
I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.
Lead Engineer, Shift Engineer, Preventive & Predictive Mechanical Maintenance Engineer
Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.
Pressure vessels, Heatexchangers and tanks designre
Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
[ 31 ]
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com