Resume - Has proven ability in design engineering, fabrication drawing detailing, materia...

Misco Jobs

Resume #67122

CONTACT INFORMATION:
View contact information...

PROFESSIONAL QUALIFICATION: B. S. In MECHANICAL ENGINEERING
Adamson University, Philippines

PROFESSIONAL ATTAINMENT: REGISTERED MECHANICAL ENGINEER
Philippine Professional Regulation Commission
General Average Rating: 86.4% - October 1986
OBJECTIVE:
„« To secure a responsible position in an organization that offers higher learning, personal and professional development, in a progressive company which put forward opportunity for career advancement.

WORK EXPERIENCE SUMMARY:
„« Twenty years of extensive experience as Mechanical Engineer engaged in various work responsibilities in the field of mechanical and piping engineering.
„« Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision.
„« Has over fourteen year's relevant exposure in Oil & Gas Industry for engineering, procurement, construction & maintenance for onshore refineries and offshore production platforms.
„« Familiar with international design codes, standards, procedures, and engineering practices.
„« Comprehensive knowledge in the preparation of technical specification for piping and mechanical works based on the applicable codes; ASME, ASTM, ANSI, API, and other international standards.
„« Well rounded in doing technical bid evaluation for piping materials and mechanical equipment, preparation and checking of piping isometric drawings, conducting field inspection for mechanical equipment and piping installation.
„« Knowledgeable and experienced in using MSOffice software (Word, Excel, Power Point, Access, & Outlook), PDMS (Review Reality).

HIGHLIGHTS OF PROFESSIONAL EXPERIENCE:

Sep 2004 to Present - Mcdermott Caspian Contractors Inc. (MCCI) - Sr Piping Eng'r. (Eng'g & Production)

Nov 2003 to Jun 2004 - Ramunia Fabricators Sdn Bhd (RFSB) - Mechanical / Piping Engineer
Seconded from Unimet Consultancy & Eng'g. Sdn Bhd

May 2003 - Sep 2003 - Vastalux Sdn. Bhd. (VSB) - Mech. / Piping Workpack & HUC Eng'r

Feb 2003 - May 2003 - Shapadu Energy & Engineering Sdn. Bhd. - Mech. / Piping Workpack & HUC Eng'r
Seconded from RNZ Integrated (M) Sdn. Bhd.

Feb 2002 - Feb 2003 - Petra Resources Sdn. Bhd. - Mech. / Piping Commissioning Engineer
Seconded from RNZ Integrated (M) Sdn. Bhd.

Aug 2001 - Feb 2002 - Malaysia Shipyard & Eng'g. Sdn. Bhd. (MSE) - Mechanical Lead Engineer
Seconded from Prinsip Johan Sdn. Bhd.

Feb 2000 to Aug 2001 - Malaysia Shipyard & Eng'g. Sdn. Bhd. (MSE) - Mechanical / Piping Engineer
Seconded from Prinsip Johan Sdn. Bhd.

May 1999 to Jul 1999 - Penang Shipbuilding & Const. Sdn. Bhd. (PSC) - Piping Engineer
Seconded from Unimet Consultancy & Eng'g. Sdn Bhd

Mar 1998 to Dec 1998 - Sime Sembawang Engineering Sdn. Bhd. (SSE) - Mechanical / Piping Engineer
Seconded from Azdaman Sdn. Bhd.

Mar 1992 to Jul 1996 - Arabian Const. & Maintenance Co., Ltd. (ACMC) - Mechanical / Piping Engineer

Mar 1988 to Mar 1992 - Richfield Construction and Trading Corporation - Project Engineer

Dec 1986 to Mar 1988 - Samingo Industrial Incorporation - Design Engineer

DETAILS OF PROFESSIONAL EXPERIENCE:

Sep 2004 -Present
Designation: Senior Piping Engineer (Engineering & Production)
Company: Mcdermott Caspian Contractors Inc. (MCCI)
BDWJF Salyan Highway 370083, Baku, Azerbaijan
Project: „«West Azeri Platform (WA-PDQ)
„«Drilling, Utilities, Quarters, Platform (PDUQ)
„« Brownfield Modules
* Gas Export Compressor Module
* Flash Gas Compression & Produced Water Treatment Module
Azerbaijan International Operating Company (AIOC) / British Petroleum (BP)
Phase 1 & 3 - Azeri, Chirag and deepwater Gunashli (ACG) Full Field Development
Job Description:
* Advised Department Head at all times on any problem arises on piping-engineering/fabrication/erection and propose technical resolution as possible
* Review MCCI generated piping Iso drawings to confirm correctness and its latest revision in accordance with clients PDMS Iso prior to issue to construction department.
* Prepare spools fabrication priority sequence and update report progress to Project Information Management System (PIMS) accordingly
* Review pipe support drawings, prepare fabrication priority sequence, monitor sub-contractor fabrication progress, and update report progress to PIMS accordingly
* Coordinate to other Discipline & Lead Engineers, Site Supervisors, Foremen on required piping works interface
* Monitor and update progress on PIMPS constantly and keep Lead Engineer informally notified on daily progress
* Prepare piping fabrication weekly Task List progress and advice Planning Department accordingly
* Raise Field Requisition form to warehouse on piping materials for fabrication & erection in accordance with priority requirements
* Prepare, monitor & report progress on Valve Preservation Works & Valve Gas Testing
* Raise and monitor implementation of Site Engineering Queries (SEQ), and close on agreed work completed.
* Raise Revision Order (RO) form in accordance with client Site Instruction, monitor, expedite and close on agreed work completed
* Monitor implementation of Construction Change Notice (CCN) in accordance with the procedure and close on agreed work completed
* Attend progress meeting (as required) with company & client superintendent and managers
* Review and monitor materials receiving progress thru Material Control System (MCS) and timely highlight the material shortages to ensure that the required fabrication & erection schedule be able to achieved
* Prepare Material Requisition to Procurement Department and monitor progress thru Standard Procurement Ordering, Receiving, & Tracking System (SPORTS)
* Prepare Additional Material Requirements (AMR) requisition form in accordance with project design, fabrication & erection changes
* Monitor 'Six Weeks Look Ahead Schedule' and ensure that the required piping system/sub-system Handover schedule be able to achieved
* Monitor and expedite implementation of piping construction Punch List items and closed on agreed work completed will
* Overseeing all piping works and requirements for mechanical completion and hand over to client.

Nov 2003 -June 2004
Designation: Mechanical / Piping Engineer
Company: Ramunia Fabricators Sdn Bhd
Teluk Ramunia, Johor, Malaysia
Seconded from Unimet Consultancy & Engineering Sdn Bhd
Project: „«Satellite Field Development III Project (GuF, IBC)
ExxonMobil Exploration and Production Malaysia Inc.
„«Fabrication of SFK-A Topsides
Sabah Shell Petroleum Co. Ltd.
Job Description:
* Review, check, and prepares Piping and Mechanical Equipment take-off based on P&ID, Equipment Project Specifications, Scope of Supply, Mechanical Equipment list, and Mechanical Equipment Layout.
* Prepares Purchase Requisition (PR) for Piping Materials & Mechanical Equipment.
* Prepares Site Technical Queries (STQ) and provide technical proposal on inconsistencies found on the project specifications & drawings, and P&ID for immediate client clarification and confirmation.
* Performs Technical Bid Evaluation (TBE) for Piping Materials & Mechanical Equipment on vendor's proposal for client approval and fabricators procurement.
* Prepares and Review design calculation and drawings for Mechanical Equipment / Pressure Vessel.
* Attend technical clarification meetings with the vendors and clients to discuss deviations and exceptions on vendor's proposal on Mechanical Equipment & Piping Materials specification for client acceptance.
* Review and check on awarded vendors documents, drawings, data sheets, and calculations against project specification / documents for client approval and construction.
* Review tie-in interfacing connection on Piping Isometric Drawings against Mechanical Equipment Vendor Data Information.
* Review and check piping line list, piping project specification, P&ID, PDMS generated piping isometric drawings to ensure correctness of material take-off for procurement and correctness of piping spools for "Issue for Construction (IFC) Drawings".
* Prepares Mechanical Equipment installation/seating detail drawings for installation.
* Performs site inspection on Piping Works & Mechanical Equipment installation.
* Prepares final as-built drawings for Piping and Mechanical Equipment project documentation requirements.

May 2003 - Sept 2003
Designation: Mechanical / Piping Workpack & HUC Engineer
Company: Vastalux Sdn. Bhd.
Jln 5/106 Bandar Sri Permaisuri, KL, Malaysia
Project: ANPG ¡V 'A' & ANDR ¡V 'A' Upgrade
HUC of Carigali Facilities in Year 2000-2005 Project
Petronas Carigali Sdn. Bhd.
Job Description:
* Prepares Mechanical / Piping Hook-up & Commissioning Workpack i.e. job cards, shop and offshore piping fabrication drawing, mechanical and piping offshore installation drawings, work execution procedures, job safety analysis procedures, commissioning test packages, project material take-off and consumable for shop fabrication & offshore installation, purchase requisitions of project material and equipment, ship-loose items list for offshore installation.
* Supervise offshore fabrication, installation, hook-up works, and commissioning for mechanical & piping activities.
* Prepares offshore everyday work permit and progress reports requirements.

Feb 2003 - May 2003
Designation: Mechanical / Piping Workpack & HUC Engineer
Company: Shapadu Energy & Engineering Sdn. Bhd.
S/23 Shah Alam, Malaysia
Seconded from RNZ Integrated (M) Sdn. Bhd.
Project: Duyong DDP-B Modification for Hydraulic Workover
HUC of Carigali Facilities in Year 2000-2005 Project
Petronas Carigali Sdn. Bhd.
Job Description:
* Prepares Mechanical / Piping Hook-up & Commissioning Workpack i.e. job cards, shop and offshore piping fabrication drawing, mechanical and piping offshore installation drawings, work execution procedures, job safety analysis procedures, commissioning test packages, project material take-off and consumable for shop fabrication & offshore installation, purchase requisitions of project material and equipment, ship-loose items list for offshore installation.
* Supervise offshore fabrication, installation, hook-up works, and commissioning for mechanical & piping activities.
* Prepares offshore everyday work permit and progress reports requirements.

Feb 2002 - Feb 2003
Designation: Mechanical / Piping Commissioning Engineer
Company: Petra Resources Sdn. Bhd.
Kuala Lumpur, Malaysia
Seconded from RNZ Integrated (M) Sdn. Bhd.
Project: Irong Barat 'A' Expansion Project
EMEPMI Retrofit Projects
ExxonMobil Exploration and Production Malaysia Inc.
Job Description:
* Prepares mechanical/piping commissioning work packages, job cards, and detailed work scope execution.
* Prepares pre-commissioning/commissioning procedures, and commissioning test packages.
* Identify commissioning consumable materials and ship loose items.
* Review of tie-in points drawings.
* Supervise pre-commissioning/commissioning activities i.e. chemical cleaning, reinstatement test, nitrogen leak test, nitrogen purging, lube oil flushing, pump alignment, function and test run of pumps

Aug 2001 - Feb 2002
Designation: Mechanical Lead Engineer
Company: Malaysia Shipyard & Engineering Sdn. Bhd. (MSE)
Pasir Gudang, Johor, Malaysia
Seconded from Prinsip Johan Sdn. Bhd.
Project: Helang Central Platform Integrated
Nippon Oil Exploration (Malaysia) Ltd.
Job Description:
* Directly reporting to Mechanical / Piping Department Section Head.
* Assist in planning and execution packages.
* Monitor design engineering activities delegated to Discipline Engineers, Designer and Draftsmen to ensure that their works are carried out accurately and systematically in accordance with the company's project standard procedures as well as international standards and ISO 9001.
* Prepares Mechanical and Piping Engineering progress and status reports.
* Assist Project Management Team (PMT) and subcontractors on matters involving design engineering and technical problems arises during fabrication and installation of mechanical and piping components.
* Attend co-ordination meetings with Project Management Team, Client, Subcontractors, for engineering and project executions.
* Prepare Site Technical Query (STQ) and other clarification to client whenever there are inconsistencies on the project drawings, project specification, and other project design documents.
* Review/check issued for construction drawings for client approval such as General Arrangement Plans, P&ID's, Mechanical Equipment Drawing,
* Review/check piping bulk material-take-off, mechanical equipment take-off for preparation of purchase requisition.
* Assist Commercial Department in the bid preparation / proposal for Mechanical and Piping labor take-off.

Feb 2000 - Aug 2001
Designation: Mechanical / Piping Engineer
Company: Malaysia Shipyard & Engineering Sdn. Bhd. (MSE)
Pasir Gudang, Johor, Malaysia
Seconded from Prinsip Johan Sdn. Bhd.
Project: Larut-'A' Central Processing Platform Topsides
ExxonMobil Exploration and Production Malaysia Inc.
: Satellite Field Development Project
ExxonMobil Exploration and Production Malaysia Inc.
: E11R-C TOPSIDES
Petronas Carigali Sdn. Bhd.
Job Description:
* Same job description as listed in working with Ramunia Fabricators Sdn. Bhd.

May 1999 to July 1999
Designation: Mechanical / Piping Engineer
Company: Penang Shipbuilding & Construction Sdn. Bhd. (PSC)
Pulau Jerejak. Penang, Malaysia
Seconded from Unimet Consultancy & Engineering Sdn Bhd
Project: „«Larut-'A' Central Processing Platform Topsides
ExxonMobil Exploration and Production Malaysia Inc.
„«ANDP-B Topsides
Petronas Carigali Sdn. Bhd.
Job Description:
* Prepares and check material take-off for bidding purposes.
* Prepares technical queries on inconsistencies on specifications and on bidding documents for client's clarification.

March 1998 to Dec 1998
Designation: Mechanical / Piping Engineer
Company: Sime Sembawang Engineering Sdn. Bhd. (SSE)
Pasir Gudang. Johor, Malaysia
Seconded from Azdaman Sdn. Bhd.
Project: „«Resak Central Processing Platform Topsides
„«Resak Drilling Platform - 'A'
Petronas Carigali Sdn. Bhd.
Job Description:
* Same job description as listed in working with Ramunia Fabricators Sdn. Bhd.

March 1992 to July 1996
Designation: Mechanical / Piping Engineer
Company: Arabian Construction & Maintenance Co., Ltd. (ACMC)
Al-Khafji, Saudi Arabia
A Japanese managed construction company specializing in ONSHORE &
OFFSHORE construction and maintenance of crude oil production and process facilities. ACMC is a leading contractor undertaking contracts with Arabian Oil Company, Ltd., Al-Khafji, a joint venture between Saudi, Japan, and Kuwait governments.
Project:
* Overhauling and Modernization of Steam Generators, Separator Vessels, Heat Exchangers and other Production Facilities.
* Replacement of Gas Compressor (35 Mt) and fabrication of related piping spools
* Install new cooling systems for fresh water and compressed fuel gas.
* Overhauling of Gas separator vessels.
* Fabricate fresh water & seawater piping of hot dipped aluminized carbon steel pipe
* Overhaul of fuel gas flare stack; non-smoking type.
* Replacement and overhauling of Fire Fighting System for Crude Oil Storage Tanks consisting of AFFF tanks, air foam chambers, fire water monitors including pig cleaning and flushing of air for foam pipe lines.
* Major Overhaul of Water Desalination Plant.
* Installation of 2.5 KM of Fire Water lines size 10"-14" diameter mortar line carbon steel pipes along with automatic discharge control system.
* Installation of Emergency Tank Drainage system for Crude Oil Storage Tank Farm consisting of installation of drain line piping, installation of 12" injection nozzles by hot tapping to 24", 36" & 42" crude oil transmission lines (hot tapping with T.D. Williamson UK).
* Expansion of Water Treatment Facilities, which involves fabrication & installation of Fiberglass Reinforced Epoxy Piping (Wavin GRE pipe) and Stainless Steel piping (A-312 TP- 316L).
* Construction of Crude Desalting Plant (40,000 BPD) and Control Room for Data Processing Control System. Includes installation of pressure vessels (Dehydrator, Desalter & Heat Exchanger), fuel gas pre-heater, vertical transfer pumps, centrifugal charge pumps & process pumps, fabrication and installation of four process tanks (Nom. Capacity of 40,000 BBLS., 500 BBLS., 3,500 GALS., 140 GALS.), piping system, process control valves, process instrumentation and fire fighting system.

Job Description:
* Supervision on various projects with Arabian Oil Company Ltd. Related to fabrication and erection of piping, equipment installation, overhauling and modernization of production facilities.
* Prepares cost estimate and material take-off for bidding purposes.
* Prepares documentation such as work schedules and work procedures for bid qualification proposal.
* Review and check design calculation of Tanks and pressure Vessels based on client's specifications and standard design code.
* Prepares construction and detailed drawings for fabrication such as piping isometric drawings, piping and equipment support, equipment installation based on general arrangement drawings.
* Perform technical evaluation for mechanical equipment and piping materials.
* Co-ordinates with the clients and vendors for technical clarification
* Co-ordinates with the clients regarding project progress.
* Prepares procedures for piping fabrication, testing & installation
* Assist on project commissioning for project completion.

March 1988 to March 1992
Designation: Project Engineer
Company: Richfield Construction and Trading Corporation
Caloocan, Metro Manila, Philippines
Project:
* Fabrication and Erection of Chemical Storage tanks, Mixing tanks, Jacketed Tanks, Elevated Water Tanks, with Mild Steel Plates or Stainless Steel Plates.
* Fabrication and installation of piping works size 1/2" - 4" diameter.
* Construction of warehouses including fabrication and erection of Steel Trusses.
* Installation of Machinery's such as Kiln drier, Shredding machine, Filling machine, Ball grinder, Conveyors.

Job Description:
* Assist on Project planning and scheduling of awarded projects.
* Prepares of bill material take-off, plans, and shop drawing.
* Supervised and prepare project status for client information.

Dec 1986 to March 1988
Designation: Design Engineer
Company: Samingo Industrial Incorporation
Malabon, Metro Manila, Philippines
Job Description:
* Prepares fabrication drawings for awarded jobs based on sketch provided by assign engineers.
* Studies' machine parts and assembly, their type of materials and its function for standard drawing and specification.
* Develop the details of important parts and critical portion by sectional and isometric view for shop fabrication.
* Prepare drawings on actual finished fabricated parts, machines, and equipment's for future company use.

TRAINING AND SEMINARS ATTENDED
„« "Basic Offshore Safety and Emergency Training"
Includes: Helicopter Underwater Escape Training
Offshore Safety
Sea Survival
Basic Fire Fighting & Self Rescue
Basic Life Support & CPR
Construction & Industrial Safety Training Center Sdn Bhd
Kuala Lumpur, Malaysia
February 25 ¡V 27, 2002

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 601 to 650 of 6411)

Go to Search Parameters...

Brief Description

Candidate for Junior drilling supervisor & a14 yearsExperience Mud Eng.specialist.

Based on my educational background, I am analytical and pay attention to details. I have done experimental work both for my graduate and and post graduate studies which enables me to have a better understanding of the real world problem solving abilities while I have practical and research backgrou

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I have over 15 years hands on experience in Oil, Gas and petrochemical plants.

15 years experience in INSPECTION OF OIL AND GAS RELATED JOBS

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

B Tech ,M Tech qualified Process Engineer

I have been working at Refinery for 10 years. I worked as a production supervisor for Hydrocracking unit, Hydrogen production unit and Hydrogen collection and distribution system. Currently I'm doing environmental work as a head of environment.

B.Sc graduate and a post graduate diploma holder in instrument technology.during the last 10 years i have gained enough experience in both construction and maintaince projects in oil and gas industries.

DCS/PLC Engineer in Control System Engineering

QHSE Specialist

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Petrophysicist Formation evaluation, Production log processing and interpretation, Geologist- Basin Modelling, LWD, MWD, mud logging, Geological interpretation of well logs, data management, Production geology. Interpretation and evaluation of well logs ranging from exploration to production and rea

Experience of over 20 years to serve you to the best of my ability without any supervision.i have HND in electrical engin. and Diploma in Computer technology from recognised university from my country.I have worked in different fields including UN mission .

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

Degree in electronic engineering in the next December, however now I am electronic technologic with 14 years of experience in the petroleum industry

MSc in Petroleum Engineering from the University of Oklahoma, USA with over 11 years of experience in both Industry and Academia to offer.conduct reservoir management activities and participate in interdisciplinary reservoir study teams. Bring a focus on performance of complex tasks.

Extensive experience in the petroleum, chemical, pharmaceutical, nuclear and environmental fields. Directed engineering, manufacturing, and construction efforts, including startup and commissioning for owners and contractors alike.

Control Systems (SIS/DCS/PLC) Engineer with >25 years of experience on various process, gas, refining, chemical and petrochemical plants/EPCM in Canada, Saudi Arabia, India & USA. „« Currently doing Detailed Engineering to SAT of Shell¡¦s Upgrader Expansion Project at Bechtel Canada Ltd.

Application for the post of Piping Designer / Mech. Draughtsman

Write-up pre-commissioning, commissioning procedures, start-up schedules and reviewing. Provide necessary technical information for procurement in compliance with tender specifications/data sheets and within budgeted man-hour and project schedules.

I have the experience as land surveyor. 10 years in united arab emirates & 6 years in Pakistan. I can do all kind of work related to my profession.

Highly motivated and result-oriented Chemical Engineer with 10+ years of international experience and proven results seeking for challenging opportunities. Well Services Field Engineer. Oil refinery and laboratory experiance.

10 years of extensive experience in planning/maintenance (CMMS) and Engineering in Petrochemical Process Industry, mainly in the Ethylene Plant and Oil and Gas Industry

Doctor of Philosophy in Science in Exploration Geophysics, IIT, Kharagpur, Calcutta, India (1977-82).• Master of Science, Technology in Exploration Geophysics, Osmania Univ., Hyderabad, India (1974-77).• Master of Information Technology, Curtin University of Technology, Perth, WA, Australia

Mechanical Engineer - Rotating Machinery & Packages

Piping /Supervisor/ Superintendent Site Manager. City and Guilds I Basic, II Pipe work, III Advanced Piping, 1970 TO 1975, Northern Counties, Engineering Craft Studies, Level 3 Pipe Fitting, 1970 to 1975 Time served (1970-1975 Emanuel Spence Pipe Services

Experience in design with Engineering Consultancy and EPC Firms in Refinery, Oil & Gas Pipeline projects, Power projects, Substation projects in India, Middle East, Africa and Canada.

Drilling Foreman (Drilling Supervisor) I have 30+ years drilling experience, which includes working as a rig worker, Mud Engineer, and Drilling Foreman.

I am a Petroleum Engineer of 14 years of oil and gas experience I have broad based skill that spread into financial and management and Reservoir modeling,seismic interpretation,seismic inversion ,great marketing skill.I have created a niche for myself in directional surveying in Nigeria.

ELECTRICAL ENGINEER WITH MORE THAN 14 YEARS EXPERIENCE

An Inspection / Static Equipment Integrity Engineer with 14 years experience in oil and gas industry.

Motivated drilling/completion engineer, with considerable hands-on experience and excellent credentials, seeks opportunity to perform at peak potential for an aggressive company. Has achieved a solid reputation for managing challenging technical operations efficiently and economically.

Wide experience leading project engineer assignments working with design/engineering teams in the supervision, development and preparation of engineering and construction documents and drawings.

Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.

NAME:JOHN GOODDY

Master Electrician \ Instrument Tech \ PLC Programmer

Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.

MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations

Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.

I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level

Operations wellsite geologist for HPHT,Deepwater and Extended reach drilling with Geosteering and Pore pressure nalysis

Static Equipment Mechanical Engineer

Mechanical Engineer; Static Equipment

Workshop mechanic to TRS Departement to Weatherford oil tool Algeria: JSA Training ; Risk Assessment Training; EEP Cetificate; Basic First Aid Training ; Fire Marshal Training ; Stab Master Sistem Training

First 1 2 3 4 5 6 7 8 9 10 11 12 [ 13 ] 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out