Resume - Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonat...

Misco Jobs

Resume #67126

CONTACT INFORMATION:
View contact information...

Nationality Jordanian
Date & Place of Birth 1946 – at Seilet Ed Dhahr

Studies: Secondary: keifan S. School – Kuwait
End of studies: 1966

Engineering: Institut National Des Hydrocarbures Et De La Chimie - Boumerdes – Algeria.

Experience:
1974 - 1982

Working with the Sonatrach, Exploration Division, Algeria.
Study of outcrops stratigraphy in the N. East of Algeria, regional geology.

Well – site geology: study and analysis of cores, interpretation of logging data, supervision of D.S.T., managing geological labs. On the well site, elaborating final reports & composite logs.

1984 – Up to date:

Working with ESSCO Amman – Jordan.

I – Managing all geological studies for water wells drilled by the company since 1984 in different projects.
- Run pumping tests for water wells.
- Make geophysical logging interpretation.
- Make final reports for all the wells and projects.
- Prepare tenders for all the projects since 1995 – up to date.

Main projects:

Project name
Location No of wells Date Well depth Consultant
Grain crops & forage project Disi – S of Jordan 10 1984 - 1985 450 m W A J
Jordan Finance House Project Dubiedeb S of Jordan 4 1985-1986 650 m Jor. Finance House
Arab Inter. Co For Agricultural Development Project Mudawara S. of Jordan 6 700 m Arab inter. Co
Grameco Project Mudawara S. of Jordan 5 1987/88 700 m Grameco
Rum Agricultural project Disi S. of Jordan 15 86-87-88 860 m Rum Agr. Co
Wadi Araba Project W. Araba S of Jordan 22 1987 300 m Energo Project Yugoslavia
Jafr Basin Study Jafr Basin S of Jordan 7 1988/89 650 Jica – Japan & WAJ
Hamad Development Project Hamad Basin E of Jordan 6 1988 950 W A J
Azraq Basin Ground Water Study Azraq Basin E of Jordan 12 992/93 1075 Salzgitter - Germany
Hydrogeological Investigation in the Hamad & Sirhan Basins Hamad & sirhan basins E. of Jordan 37 1993/94 870 m Gitec – Germany & GSI – U k - WAJ
Safi Area Safi 11 1988/90 350 m Arab Potash Co.
Wadi Araba Deep Aquifer Study Wadi Araba 4 1997/98 1250 m Scott Wilson – U k
Wadi Wala Dam Site W. Wala 2 1999 163 m AEGEK - GREECE
Drill private wells for:
▫◊ Amoco Oil Co.
◊ Hunt Oil Co.
◊ N R A
◊Water Auhority
Omari & W. Araba
Echeediya
Traibeel
Amman, Zerka & Mafraq areas
2
1
2
15
1988
1988
1997
1997
250 m
220 m
450 m
350
Amoco Oil Co
Hunt Oil Co
N R A
W A J

Private wells: more than 350 wells around Jordan for agricultural, industrial projects, universities & municipalities.

II Managing dam site investigations:

Study of cores, cuttings, geophysical logging, run permeability tests, soil sampling, pumping test, make final reports, in the following projects:

Project name Date Consulting Engineer
Zerka river dam site 1984 Sir Alexender Gibb & partners – U K
Wadi Mallaha dam site 1985 &1987 Sir Alexender Gibb & partners- U K
Wadi Wala dam site 1990 Howard Humphreys – U K
Wadi Tannur dam site 1994 Howard Humphreys - U K

III Managing drilling projects in:

Project name Date Project No Consultant
Azraq ground wate investigation 1992 141 – 191 project 67 – 89 central Salzgitter - Germany
Jafr Basin study 1988 Jica – WAJ J F - 1 Jica - Japan
Groun water invest. In the Hamad & Sirhan Basins 1993 Project 79/91 Central (JOR) and SEM /03/628 (EEC) Gitec – Germany & Hydrogeological survice Co – U K
Wadi Araba Deep Aquifer study 1997 Project No 8 - 97 Scott Wilson Kirkpatrick – U K
Qatrana plateau deep aquifer study
Qatrana Plateau deep aquifer study
Qatrana plateau deep aquifer study
Azraq plateau deep aquifer study
Wadi Hisban Exploration well
2001
2002
2003
2002
2002 M/10/2001 /Works
M-4-2002 – Works
M-7/203/Works
M/13/2002/Wrks
R/17- 2002 Ministry of Water & Irrigation.

Drilling production well in Mukheiba area 2002 R/10/2002 J V A
Drilling 5 production wells in Belqa
Departement
2002 M/70/2001- Works W A J
Traibeel Clinic well 2000 CETAC – P D - CT US Army Corps of Engineer

Drilling production well in Wehda Dam 2004 Ozaltin Co
(Turkish Co )
SIRHAN Plateau deep Aquifer Exploratory well 2004 MIW
Drill Fidan production wells (6 No ) 2006 JVA
Azraq deep exploratory well 2006 MIW
Dhiban deep exploratory well 2007 MIW
Qunayya deep exploratory well 2007 MIW

IV - Managing Financial, logistic & Administrative Operations in the Projects.

Other Qualifications:

Fluent in English, French And Arabic Languages.
Typing, computer and Drafting skills.
Driving License.

Note:

M I W: Ministry of water & irrigation
W A J: Water Authority Of Jordan
J V A: Jordan Valley Authority
N R A: Natural Resources Authority
A P C: Arab Potash Company

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 6411)

Go to Search Parameters...

Brief Description

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Mechanical and gas (natural) handing skills, repair of "Novopegneon” and “ General Electric” equipment, solid Knowledge of automatic Gas turbine equipment.

Instrument / Controlsystems Engineer

Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .

Geologist geophysicist interpretation

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.

Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Chief Metallurgist

Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

More than 28 years of experience in oil industry

22+ years solid background of Piping Design in the petroleum contracting industry, covering all aspects of design activities

Experienced Completing and Producing Petroleum Engineer

Offering more than Fourteen years of Experience in Marine, Offshore, Oil & Gas Industry with a wide variety of projects involved in Electrical & Instrumentation Disciplines. Acquire extensive knowledge in a broad range of Computer programs & other Various E & I Engineering Field

Senior Corrosion Engineer with 14 years experience at metallurgy fields especialy corrosion & corrosion control. expert at painting, insulations,cathodic protection, materials selection, corrosion inhibitors, corrosion monitoring, coatings inspection . I am serious at work.

An astute techno-commercial professional having 13+ years (of 15+ years) diversified experience in grid connected wind energy sector.

Top-notch Instrumentation Technologist and Process control Team Leader of an US based MNC for the Central Engineering Division in Mumbai to meet the requirement of Asia Pacific and Europe who are pioneer in the manufacture of specialty chemicals with over 18 years of notable experience in the field

High level technical knowledge and understanding of execution methodology on engineering aspect. About 5 years in a QA/QC jobs engage in Power Plant Construction under the management of Japanese Firm. Had a background on Piping/Mechanical Designs using Autocad. Advance computer literacy.

As a well sit geologist for six years, including one year for Coal Bed Methane, familiar with StripLog, SDL_9000 geological logging software, strong organization ability

Electric Engineer with MSEE with more than 15 years of work experience in oil and energy industry, occupying positions in electric maintenance, utilities plants operation and project engineering management and construction,

Highly qualified, and experienced Fully conversant with all aspects of evaluation and testing of drilling mud. Expertise in testing of all the mud parameters

I am a postgraduate in civil engineering from the prestigious Indian Institute of Science, Bangalore. My major experience is in Oil industry. I have vast experience in Contracts Management in India & abroad.

Control & instrumentation

KEY COMPETENCIES

Gradute chemical engineer

A highly skilled Petroleum Engineer with over 20 years domestic and international experience in Petroleum Industry as a Petroleum Engineer, experience in reputed International Service Company

Free! Oil and Gas Industry onshore construction civil engineering Superintendent with 20 years experience in overseas projects.

Twenty plus year's progressive experience in heavy industrial design, development, and construction for petrochemical refineries, upstream petrochemical, waste water treatment, power generation, chemical demilitarization facilities, Microchip facilities, LPG gas transitions, and the food & beverage

I am very talented and a hard worker. I have a good eye for any type of construction.

24 years of experience in Upstream And Downstream (Refinery) Oil & Gas Operations and Process Engineering out of which:

Reservoir Engineer with over 20 years of experience in international oil company, consulting/software company and consulting company both in technical capacities and management and business development.

7 years experienced in Oil Refinery Operations . 8 years experienced in Petroleum and Gas Processing Engineering (Design, Research and Development of Oil Refinery Processes). 5 years of international exposure in Europe , Asia, Africa, Middle East .

Significant experiences in analytical and computational modeling in both structural and thermal-fluid areas. Working on offshore engineering design in shallow and deep water, which includes subsea pipeline, riser, and stinger design.

Project engineer with management skills

I have a record of outstanding success in the field of Instrumentation Engineering for the past 20 years with various clients and consultants in India and overseas for the Oil & Gas (both onshore and offshore upstream)/Petrochemical/LNG Projects/Plants.

Skills : Structural Analysis & Design with help of Engineering Software qualification : Master of Engineering (Civil) Specialisation : Structural Engineering

First 1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out