Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #67175
next resume »»
CONTACT INFORMATION:
View contact information...
CAREER SUMMARY
Organization Ourhoud Algeria June 2003 to Present
Working for Organisation Ourhoud a joint venture oil company between Sonatrach and 6 foreign partners in Hassi Messaoud, Algeria. Field reserves in excess 1 billion barrels and daily oil production rate of 235,000 bopd.
Production Engineer Jun 2004 to Present Ourhoud Field Development, Algeria
* Providing support to field well operations personnel in the management of a 1 billion barrel oilfield with a daily oil production rate of 235,000 bopd.
* Designed and implemented a sand control strategy for the field.
* Designed and performed acid stimulations for gas and water injection wells.
* Reviewed well performance limitations to arrive at a well management strategy for optimum production.
* Reviewed well performance and gas lift performance for optimum production.
* Reviewed and selected zonal isolation techniques for gas and water breakthrough.
* PLT interpretation using EMERAUDE software.
* VLP modeling of oil, gas and water wells using Petroleum Experts IPM software.
* Gas lift design and optimisation
* Integrated production optimisation using petroleum expert software ( Prosper, Mbal and Gap)
* Well service programs for PLT's, CBL's, RST's, Acid stimulation, Coil tubing cleaning, and run Gauges.
* Exposure to water flooding and gas injection project.
* Strong knowledge preparation and QC of production/injection data allocation reports.
Reservoir Engineer Jun 2003 to Jun 2004 Ourhoud Field Development, Algeria
* Based on own initiative designed and developed tools and systems to achieve consistent daily average production allocation factors of <3% through the innovate use of multi phase flow meters.
* Integrated multi phase flow meter production data into a field wide production strategy based on voidage replacement. Designed tools to monitor voidage replacement on a weekly basis allowing constant rescheduling of well priorities.
* Designed and implemented a pre-production field wide interference test to determine the connectivity of the Ourhoud Field. Planned the running of gauges in a total of 17 observation wells.
* Proven team player and builder within a challenging, multi-disciplinary and multi-cultural environment.
* Welltest and production logging tender preparation and evaluation.
* Welltest interpretation using SAPHIR software.
* Supported multi-disciplinary WAG team in the interpretation of welltest results.
* PVT sample planning and interpretation of results.
EDUCATION
Oklahoma University Oct 2000 to Jan 2003
MSc Petroleum Engineering
(Sonatrach Oklahoma University Training Program)
National Institute of Hydrocarbons and Chemistry Oct 1994 to Jul 2000
BEng Petroleum Engineering,
ADDITIONAL COURSES
5 days course in the following subjects;
* Petroleum Experts software (Prosper, Gap & Mbal) – IPM 2003
* Waterflooding A to Z - OGCI. 2003
* Geochemistry course - Oil Optimisers 2004
* Foundation Production Logging "Emreaud" – KAPPA 2005
* Production operations 1 - OGCI 2005
* Hydraulic Fracturing – KTC Schlumberger 2005
* DSS software "Dynamic surveillance system" – Landmark 2006
* Production Optimisation using Nodal Analysis 2007
* Gas Lift 2007
COMPUTER SKILLS
Windows95/98/XP & NT, MSExcel, MSWord, MSPowerpoint, Internet, Outlook, MBAL, Prosper, GAP, Emreaud and Saphir.
LANGUAGES
French: fluent, speaking and writing.
English: working knowledge, writing and speaking
Arabic: fluent, speaking and writing.
PERSONAL DETAILS
Marital Status: Married
Number of children: One
Date of Birth: 11th March 1976
Nationality: Algerian
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1651 to 1700 of 6519)
Go to Search Parameters...
Brief Description
I am chemical engineer seeking position is Production, process and design. I am harworking and good learner of new technology. I have excellent interpersonel skills and organisational skills.
I am a mechanical engineer with experience in the Power Generation industry. I have worked for Siemens/Westinghouse as a field engineer, managing gas turbine upgrades and repairs. Also I have worked for Air Products supervising hydrogen plant construction and operations. My background also includes
A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels
Master of Engineering ¡V Petroleum Systems, University of Regina, Canada
IIW-qualified welding engineer with eight years of progressively responsible inspection and engineering positions. Comprehensive knowledge of fabrication standards and codes , welding , Post-weld heat treatment (PWHT) , mechanical and Nondestructive testing (NDT), pickling/passivation and painting
Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.
Drilling Technician
A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.
Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.
qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy
MWD Engineer
Control system designer / instrumentation
Civil / Structural Designer, PDMS, AutoCAD,
Quantitative Interpretation for Reservoir Characterization
13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.
•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.
Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.
Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.
I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.
I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.
I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.
A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.
•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills
15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management
Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.
Instrument and control system Engineer having 7 years experience in Oil & Gas field.
An Automation Engineer with 4years experience in power plant project
Electric Technical Officer (ETO)
FEM,Structural dynamics, Structural analysis, FEM softwares
I am an Experience British engineer with over 15 years of diverse engineering experience, currently working for SHELL, as an Interface Manager for the Bonga SW, 7BUSD Project. I do have strong analytical and judgemental skills, strong team player. Capable of organizing and motivating technical emplo
electronics & electrical equipment maintenance, warehousing & procurement.
PDS Designer
I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.
Reservoir Engineer with a multi-disciplinary background and 5 years experience in Algeria, West Africa and South America, seeking a challenging career move
An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.
Current Industry: Offshore Piping/Platform/Marine Construction.
CFD coding using C++, Design and Analysis in CFD using FLUENT, Modeling and Structural analysis using ANSYS, Process flow sheeting and simulation using Aspen Plus, Batch process Unit operations and hands on experience in handling chemicals
Control Systems engineer,14+ years experience
Instrumentation and control forman
I would like to submit that I have total five year experience including four year as a Reservoir Engineer. I have great knowledge of different software which is mostly used in the oil industry. I worked as a team member for conventional Reservoir calculation and simulation as well. My basic Educatio
QA/QC PIPING ENGINEER/ INSPECTION ENGINEER.
Petroleum Engineer Ourhoud Field Development, Algeria Jun 2003 to Present
Having +10 years of Gas Processing, Fertilizer & Petrochemical Plants operational and supervisory experience.
Over 8 years experience as a piping team member and leader involved in oil, gas and petrochemical plants. Participated with famous European companies (Foster wheeler, Lurgi, Davy Process Technology, AKPG Kvaerner) as the main contractor, sub contractor or consortium member
Controls Eng. Tech.
Instrument engineer
Senior geophysicist: 2D land seismic data processing (OMEGA), meeting with clients, supervising projects, PreSTM velocity model building, full responsibility of 2D projects, Basic knowledge ProMAX processing system
Sr Rotating Equipment Engineer
Process Engineer (Chemical Engineering)
I HAVE +10 YRS EXP IN A PETROLEUM LABORATORY OF OIL REFINERY IN INDIA,HAVE KNOWLEDGE OF TESTING ALL PETROLEUM PRODUCTS.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
[ 34 ]
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com