Resume - qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and ...

Misco Jobs

Resume #67189

CONTACT INFORMATION:
View contact information...

* Presently working in QG3&4 QCS (Qatar, ConocoPhilips, Shell) Project as Piping/Mechanical Inspector Client side.
* One (1) year and 9 months working in Nigeria Liquefied Natural Gas (NLNG) HRP Training Center as a Mechanical/Fabrication/Welding Instructor and also was assigned to NLNG PTD (Production and Technical Division) as Mechanical/Piping Engineer during the absence of a planned training during the RFSU of Slug Catcher.
* Five (5) years and six (6) months works for Nigeria Liquefied Natural Gas Project Train 3, 4, 5 and 6 (Expansion, Plus and Train 6 Project) as QC Welding Inspector and Commissioning Supervisor.
* Nine (9) months works for Different Company around Metro Manila.
* Three (3) years and eleven (11) months works for ABV Rock Group (Saudi Strategic Storage Project) Underground tunnel as a QA/QC inspector promoted to QC Field Engineer and last promotion was QA/QC Welding/Mechanical Supervisor.
* One (1) year and four (4) months work for Kellogg International Services (JGC, MWKL, Sime Joint Venture) as a QA/QC Inspector in MLNG DUA Project.
* One (1) year and five (5) months works for Bechtel International as QA/QC Multi- discipline inspector in AL-AWDA/AL-TAMEER (Reconstruction/Rehabilitation) Project after gulf war.

* One (1) year and eight (8) months works in PEMCO Inspection Company as QA/QC inspector, Welding inspector, NDT inspector in various company such as QGPC, NODCO, QAPCO and QAFCO.

PROFESSIONAL EXPERIENCES

Date – December 16, 2007 ~ Present
Company – IPEDEX
Project – Assigned to QATARGAS 3&4 Project (Client side)
Ras Laffan, State of Qatar

Piping/Mechanical Inspector

Duties and Responsibilities:

1. Responsible in the inspection of all Equipment Alignment at Train 6 and 7. From foundation padding inspection, Bolts projection and sizes, dimension of spacing of each bolts as per vendors drawings, elevation, plumbness of equipment.

Date – February 15, 2006 ~ November 30, 2008
Company – BAKER OVESEAS TECHNICAL SERVICES
Project – Assigned to NLNG HRP TRAINING CENTER
Bonny LNG Complex, Republic of Nigeria

OJT (MECHANICAL/PIPING/WELDING) INSTRUCTOR

Duties and Responsibilities:

2. Identify, develop, conduct, facilitate and deliver high quality discipline-specific training such Mechanical maintenance on valves, pumps, compressors and Machining, piping/fabrication and welding. Also Engineering drawings such as Orthographic, Isometric, P and ID, PEFS.
3. Conduct Hands-on training in all aspects of Maintenance (compressor, valves, pumps) Piping Fabrication, Pipe Welding, Marine machinist/fitters/welders, QA/QC inspectors and commissioning.
4. Liaise with Production department, mechanical maintenance department, commissioning department, vendor and ship manning to determine the training needs.
5. Liaise with other discipline trainers and the Line Head to ensure suitable cross training opportunities are fully utilized.
6. Supervision of all trainees (technician graduate and seasoned professionals) during training session.
7. Kept and update workbook of each trainee.
8. Evaluate and assessed trainees before and after completion of the training programmed.
9. Prepared and submit assessment report to the Senior mechanical instructor, Line Heads and Managers of each discipline.
10. Conduct routine inspection for the OGGS and EGGS Slug catcher project and liaise with Akaervaerner Construction Nigeria Limited.
11. Monitored progress in regards to mechanical, piping, painting, insulation and civil works.
12. Raised punch list items in regards with Mechanical, Piping, Painting, Insulation and Civil Works before RFSU.
13. Prepared daily progress of the OGGS/EGGS project.
14. Reported to Project Engineer and Line Head Manager regarding daily activities of contractors.

Date – July 15, 2000 – December 24, 2005
Company - DAEWOO NIGERIA LIMITED
Project – DN-34, NLNG EXPANSION, PLUS and Train 6 PROJECT
Bonny LNG Complex, Republic of Nigeria

QA/QC Welding Inspector and Commissioning Supervisor

Duties and Responsibilities:

1. Prepared sample WPS for Procedure Qualification Testing.
2. Developed Procedure Qualification Record
3. Monitored and inspect Welders Qualification Testing as per ASME IX and B31.3
4. Monitored daily production and conducted visual inspection as per ASME/ANSI B31.3, technical specification and ITP.
5. Inspect and verified spool fabrication as per latest revision drawings and technical specification.
6. Liaised with main contractor with regards to ITP, Orifice flange fabrication, defects and repairs of welding and fabricated piping spool.
7. Verified daily welding reports of sub-contractor.
8. Verified material traceability record of fabricated piping spool.
9. Prepared daily activities and repots to QA/QC manager.
10. Monitored and Supervised workers during breaking-out and blowing/cleaning of system.
11. Conducted punch list and reinstatement of system as per PEFS and P&ID.
12. Supervised the tensioning test of 2'' diameter bolts and torque tightening of stainless steel bolts.
13. Prepared reports and reported to Process Engineer daily the completed system.

Date – September 5, 1999 – June 18, 2000
Company – Self-Employed
Project – Various Companies
Metro Manila, Philippines

Trainer/Instructor

Duties and Responsibilities:

1. Trained welders and conducted Welders Qualification Testing as per ASME IX and Company procedures.

Date - July 16, 1995 to August 30, 1999
Company – ABV ROCK GROUP
Project – Saudi Strategic Storage Project
Site 5, Jeddah and Site 6 Abha, Kingdom of Saudi Arabia

QA/QC Inspector
Promoted to QC Field Engineer
Promoted to QA/QC (Mechanical/Welding) Supervisor

Duties and Responsibilities:

1. Prepared PQR as per the requirements of API 650/620, AWS D1.1, AWS D1.4, ASME IX, and ASME VIII.
2. Monitored sub-contractors Welders qualification testing.
3. Monitored daily activities of site welding inspectors.
4. Planned schedule of inspection activities of QA/QC inspectors to increase the production activities.
5. Liaised and coordinates with client counter-parts with regards to Quality and Safety.
6. Report directly to QA/QC manager daily for the progress and every revision or changes in site which need their approval and for proper documentation.
7. Issued Non conformance report to Construction Department for not following drawings and specification.
8. Conduct Mechanical Testing (Tensile test, Break Test and Bend test) using Universal Testing Machine.
9. Assisted the Manager during Audit period.
10. Prepared summary of daily inspection report to QA/QC manager.

Date – February 1994 to June 1995
Company – Kellog International Services (MWKL, JGC, Sime Joint Venture)
Project – Malaysia NLG Dua Project
Bintulu, Malaysia

QA/QC Inspector

Duties and Responsibilities:

1. Establish and Implement of construction Quality Procedures and Standards (ASME IX, ASME VIII, & B31.3)
2. Check materials received against purchase order and mill certification.
3. Conduct and check material traceability during fabrication of piping system.
4. Check alignment, plumbness, straightness, orientation against approved and updated isometric drawings, piping plan and piping and instrument diagram.
5. Implement strict Safety policies to all sub-contractors involved during the fabrication, erection and installation.
6. Signed related documents and during fabrication and installation.
7. Conduct positive alloy material identification on stainless steel and Cr-Mn Steel.
8. Review and compilation of all QC documents prior to final hand-over to the client.
9. Conduct Quality Audit on sub-contractors in regards to piping, welding and safety.
10. Report to QA/QC supervisor daily in regards to progress and Non-compliance of the sub-contractors.

Date – October 1991 to March 1993
Project – Rehabilitation of (Al-tameer/Al-Awda Project)
Ahmadi/Brughan/North Field Oil Gathering center and Oil Refinery after Gulf War, Kuwait
Company – CooperHeat/Bechtel

QA/QC (multi-discipline) Inspector

Duties and Responsibilities:

1. Conduct damage assessment
2. Conduct monitoring of daily progress and inspection during the repair and reconstruction of oil pipeline, gathering center, booster station, oil refinery, oil jetty terminal, tank repair and coatings.
3. Conduct monitoring and inspection of structural of Riser Guard of Offshore loading terminal and dolphin.
4. Inspect coating of pile prior to driving into the shore line.
5. Coordinate with KNPC and KOC personnel with regards to construction, rehabilitation, inspection, testing, commissioning, and for final hand over of all related documents.
6. Report to QA/QC supervisor and Manager for the daily activities and progress.

Date – November 1989 to July 1991
Project – Assigned to various companies (QGPC, QAPCO, QAFCO, NODCO, MANNAI engineering)
Company – PEMCO inspection company
Doha, Qatar

Piping Inspector/Supervisor
QA/QC (multi-discipline) Inspector
NDT Inspector

Duties and Responsibilities:

1. Involved in all aspect of Inspection (On-Stream Inspection, Record inspection to data base for future reference) in construction, erection, shutdown, and commissioning, testing and related QA/QC works. Inspection of Vessel, Columns, Piping, Tanks. Perform NDT.

SEMINARS ATTENDED
* Welding Inspection
* Safety Course for Scaffolding, Electrical, Confined space entry
* How to become an effective supervisor

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2301 to 2350 of 6411)

Go to Search Parameters...

Brief Description

Sr.pds piping designer with 11 years in layout and detaling work.

Supervisor and leader of Electrical and Telecommunication department activities in engineering, procurement and construction services in OIEC group

Experience of Design of material handling equipments, Pipe & flow analysis, Corrosion Engineering, Mechanical software like Inventor,Autocad,Catia

I amMsc Electronics ,Good Computer Hard ware& Software Knowledge,DCS , PLC & Field Instrumentation

Electrical Engineer - Power Plant Operation and Maintenance

5yr experience in Piping Design (PDS), Layout Planning, Project Planning & Management, Erection supervision & support.

An HND holder in Electrical/Electronics Engineerin with diverse experience in industrial maintenance and installation. Good understanding of Marine and Oil and gas enviroment.Excellent negotiation and and problem solving skills.

Instrument/analyzer technician

plot plant , detailed engineerng , pdms modeling,

I have 5+ Years Experience in Electrical Field with Multi Discipline Experience in Instrumentation Including Construction, Quality Control, Power Systems, Operations and Maintenance. I have Work Experience in Power Plant, Oil & Gas Industry and Rig Platform & Process Platform in OFFSHORE

Metallurgist/Material Engineer Background, Maintenace & Reliability Experience

Electrical Designer 12-1/2 Years of Exper. Layouts Cable trays/trench, Grounding, Power, Lightings, Tele Communication, Fire & Gas detectors, Multi Cable Transit (MCT) & related supports details. Single Line & Interconnection wiring block diagrams. Power / Instruments, Fire & Gas Cable Schedule etc.

I/E Designer, 28 years experience in the petrochemical industry along the Gulf Coast and in the oil industry in Alaska. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office. Experienced in working with other disciplines, clients, vendors & construction. Will travel

PROJECT/DESIGN ENGINEER FOR FIRE PROTECTION SYSTEM

Proven oil and gas manager

Experienced Exploration Geologist with over fours years’ field experience.

Mechanical Engineer, with 11yrs exp, Specialized as Coating/painting engineer implementation of different types of coating techniques, practices, Corrosion control Operations, scheduling and monitoring. Been a Coating Inspector & QC Inspector & NACE Corrosion Inspector - Level 1

BACKGROUND SUMMARY Over 10 years of experience in Piping, Structural, Mechanical, and Civil with experience in 3D modeling, CADWORX and drafting and designing refinery foundations.

DRILLING ENGINEER / TRAINEE ASSISTANT DRILLER, EXPERIENCE - 3 YEARS IN OIL FIELD AS DRILLING ENGINEER

Three years experience as an engineering tech, 10 years experience with data manipulation.

Inspection and laying of PE gas line in Mumbai for Mahanagar Gas Ltd (MGL) and Inspection of painting and coating of steel structures in offshore.

I have over twenty-five (25) years of experience in the petroleum (upstream - field), quality assurance, program / project management, purchasing / supplier quality, engineering, safety, manufacturing, supervisory (hourly / salary and union / non-union), and management capacities.

qualified to CSWIP 3.1 and AWS CWI, Knowledge of welding Inspection, piping and mechanical inspection.

I am 38 years old, good health and have 12 years solid experience on project management for several types of large, complex and fast track International projects.

Extensive experience and education in mechanical engineering and projects management

PDS Piping designer Engineer

PLANNING ENGINEER: Liaison with Client, Consultant, Sub-contractors and Internal departments to get complete information on assignments for further instructions to Project Engineers. Conduct daily planning/production meetings with Site Manager/Project Engineers for discussing critical activities

Process Engineer in Refinery, Oil&Gas and Petrochemical Industries

Construction Mgr.- Piping Eng.

Senior Electrical Control Eng. / PLC Programmer / Scada System Specialist

Relay Protection coordination (by Captor software); motor starting, load flow, fault studies by ETAP software; DBs and MCCs selection; AFD selection and implementation; Frame6 power generation commisioning and maintenance; Switchgears up 110 kV commisioning and maintenance.

v A First class (60%) Bachelor of Chemical (B.E.) engineering graduate from Poona university in 1992, having a total (Cryogenic Air Separation/LNG Terminal & Regasification Unit /Refinery/Petrochemicals) industrial work experience of ~ 12 years.

aws cawi

Diploma in Electronics & Comm., Diploma in Electrical Tech., ROV Pilot/Tech

4+ years of experience in civil & structural design and analysis of Offshore structures, Pre-Engineered Buildings, Conventional Buildings, Commercial and Residential concrete structures.

Prepare piping material specifications with the help of MARIAN software. Perform various calculations as per ASME 31.3 for pipe thickness, Miter Bend, Reinforcement Pad. Generation of Essar Commodity code philosophy and assignment of commodity codes to piping commodity.

Instrument technician with 10 years experiance (3.5 years knpc kuwait)

NACE Certified Cathodic Protection Technologist (Level III) - Corrosion Technician

Familliar with CAESARII

Service Engineer / Instrumentaion tech application calibration commisioning

PDS administration, Complete project setup and support on multiple large scale projects using PDS 7.2, 7.1,7.0 and 6.4 Microstation J/SE, PDS Piping specifications and RDB Support, Isogen setup and support, INTools support, SmartPlant Review Administration, and other 2D and 3D CAD tools.

work in instrumentation,automation,PLC in industrial environments

Process engineer with 5 year experience working in the refining and oil & gas industry. My most recent (and current) position has provided me with overseas experience for an oil producer American company.

Present Bachelor of Petroleum and Natural Gas Engineering (Designing counstruction and exploitation of oil and gas pipelines,piping and storage facilities faculty )

Rotating Equipment Engineer

Rotating Equipment Engineer with 5 years experience in Refinery and Oil and Gas jobs

Working knowledge of Allen Bradley PLC-s, turbine, generator and auxiliary equipment including their interfaces to the control system, Foundation Fieldbus network

Piping Design

Chemical engineering degree in oil&gas field, experiance at project engineer and vice-project manager, control project, cost stimate, coordinate engineering desceplin, etc.

Senior technician instrument

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 [ 47 ] 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out