Resume - Welding Inspector

Misco Jobs

Resume #67220

CONTACT INFORMATION:
View contact information...

Personal Statistics

Place / Date of Birth: Tanjung Pinang/ December 10, 1971
Nationality: Indonesian
Sex: Male
Religion: Moslem
Marital Status: Married (3 children's)

Seminar / Course Attended
* T. B O S I E T, Conducted by PT. IKS – Jakarta 28 to 29 September 2006
* Attendance Senior Welding Inspector CSWIP 3.2 April 2006
* Welding Inspector CSWIP 3.1 Course by TWI May 2005
Certificate No: 20744, Expiry Date, 13 May 2010
* Radiography Interpreter Level II PCN, 8 April 2007
PCN No: 302020 ExpiryDate, 25 April 2012
* Radiography Interpreter ASNT Level II November 2004
* Welding Inspector Certified by Migas, Apitindo & Disnaker 2003
* Inspector Pressure Vessel, Certified by Micas ( Attendant ) 1998
* Welding Supervisor, B4T Bandung 1997

Experience Summary:
More than Five teen (15) years of experiences In yard Fabrication as Quality Control Inspector, Third Party Inspector and Client Representative ( Inspection and expediter ) and familiar with Inspection and expedite of shipbuilding, Pipe Spools, Pressure Vessel, Shall and Tube Heat Exchangers, Air Cooler Heat Exchangers and steels Structural also Pipe Line. Familiar with material carbon steel, Stainless steel, Duplex, Super duplex Some Experience with Painting and Pipe Coating Inspection ( Concrete, FBE and FPC 8888 ), and have been experience with CTOD Testing and Other Destructive Test and Non Destructive Test also Experience for Inspection Pipe Mill and Pipe Treading. Ability to interpretation code, standards, client specification and technical drawing.

Duties and Responsibilities:
* Attend Pre Inspection Meeting
* Planning and attend Progress Meeting With Vendor and Subcontractor
* Reviewed and monitoring Sub Vendor fabrication Scheduling.
* Reviewed Material procurement and Incoming Material include MRR, Mill Certificate and Visual Inspection
* Review Inspection Test Plant
* Audit quality system of Vendor
* Reviewed Vendor Applicable Document and Approval Status
* Witness WPS Running Test and welder Qualification Test
* Witness Mechanical Test such CTOD, Tensile, Bend Test, Impact Test, Macro and Review also endorsement the Report.
* Reviewed Fabrication Drawing Prior Production and Make sure to comply with Client specification and Code or standard requirement.
* Reviewed Safety Manual of Vendor
* Control of Document Approval Status.
* Conducted Quality Inspection
* Monitoring Production Activities.
* Witness All Testing Activities.
* Reviewed RT Film and all NDT Report.
* Reviewed all Testing Report.
* Blasting and Painting Inspection.
* Pipe Concrete Coating Inspection
* Monitoring Delivery Package and see Fastening
* Control and Reviewed Manufacturing Data Report/ Dossier.
* Pipe Treading Quality Inspection
* Monitoring Double Joint For Pipe Line Project
* Reviewed Tally Sheet for Pipe Line Material
* Material Loading Inspection
* Progress Control and Reviewed scheduling, Progress Report
* Writing Report direct to client.

Experience

1. GL- Nusantara for ConocoPhillips
Period 12 February 2007 to 15 November 2007
Project North Belut Project
Location * PT. DSAW - BATAM (Pipe Mill)
For inspection of pipe fabrication
* PT. Heat Exchangers Indonesia – Batam
For fabrication 26 unit pressure vessel with overlay material
Fabrication Sand Handling Unit (2 Skid)
Fabrication one Unit MEG Regeneration Package
* PT. Technics Offshore Jaya- Batam
For Fabrication of Diesel filter and mercury boom filter
* Jord International – Batam.
For fabrication 16 Heat exchangers Air coolers
Position Representative Inspector

2. GL- Moody International Indonesia for Larsen & Tubro India
Period 12 October 2006 to 08 February 2007
Project MG3 PROJECT-Petronas Penapisan Malaysia
Location * PT. Heat Exchangers Indonesia – Batam
Fabrication of 12 Units Air Coller Heat exchangers.
Client PETRONAS PENAPISAN MALAYSIA
Position Expediter

3. GL- Nusantara for ConocoPhillips
Period 15 July 2006 to 11 October 2006
Project Hang Tuah Modification project
Location * PT. TRANSALINDO EKA PERSADA - BATAM.
Modification Pipe Riser, Sub Sea pipe from Belanak to Hang Tuah and Top Side Pipe Spool Include Access platform for Hang Tuah Platform, Double Joint sub sea pipe
* PT. BREDERO SHAW – BATAM
Pipe Concrete Coating, FBE and SPC 8888 Epoxy Pipe dia 6" to 24" Concrete Coating, FBE and SPC 8888 Epoxy Pipe dia 6" to 24"
* Hang Tuah Offshore Platform – Natuna Sea.
Installation on additional Section pipe c/w platform and subsea Pipeline.
Position Representative Inspector

4. DENHOLM ZHOLDAS for TINGIZECHEVROIL – Kazakhstan
Period 05 May 2006 to 10 July 2006
Project Hang Tuah Modification project
Location * Tingize Plant – Republik Of Kazakhstan.
Kulsary Technical Pipeline Direct Connection for Old Boiler House.
Fabrication Spool Pipe and Installation of Pipeline
Position QC Inspector

4. MAGTEK – Singapore for HORIZONE OFFSHORE
Period 11 to 20 April 2006
Project CHEVRON – Colombia Project
Location * Serimer Dasa – Johor Malaysia.
Running Test Welding Procedure Specification.
Welder Qualification
Position QC Inspector

5. PT. GL-NUSANTARA For ConocoPhillips Indonesia
Period 01 MEI 2005 – 10 April 2006
Project Suban Phase II Gas Project (Grissik Project)
Suban Gass Plant Musi Bayu Asin Palembang south Sumatra – Indonesia
Location * PT. HEAT EXCANGERS INDONESIA – Batam.
Fabrication of nine units Pressure Vessel with Clading Material and Overlay Welding Process.
Modification Pipe Riser, Sub Sea pipe from Belanak to Hang Tuah and Top Side Pipe Spool Include Access platform for Hang Tuah Platform, Double Joint sub sea pipe
* PT. Transalindo Eka Persada – Batam
Fabrication Filter Separator, Pressure Vessel and Skid Metering System with Overlay welding Process
* PT. PATRA FABRIKASI Indonesia – Batam.
Fabrication of 4 units Heat Medium Heater.
* PT. Indojaya Pipe Indonesia – Bintan
Pipe Concrete Coating, FBE and SPC 8888 Epoxy Pipe dia 6" to 24" Concrete Coating, FBE and SPC 8888 Epoxy Pipe dia 6" to 24"
Position Client Representative (Inspection and Expediting)

6. PT. MOODY INTERNATIONAL For APACHE ENERGY LTD - Australia
Period 26 October 2004 – 26 February 2005
Project John Brookes Project - Australia
Suban Gass Plant Musi Bayu Asin Palembang south Sumatra – Indonesia
Location * PT. HEAT EXCANGERS INDONESIA – Batam.
Fabrication of Two Gass/Gas Heat Exchangers
Two units Amine Reboiler
Eight units Heat Exchangers Coolers

Position Client Representative (Inspection and Expediting)

7. PT. BIRO KLASIFIKASI INDONESIA – BATAM
Period July 2004 - 25 October 2004
Project REPAIR OF OFFSHORE PIPELINE UHB 11, 3, 7, 8, 15
Location Handil II (Offshore & Onshore) Balik Papan East Kalimantan - Indonesia
Decommissioning prior Pipe Repair, Flushing, Hydro Test and Commissioning and Double Joint Pipe
Client TOTAL E & P INDONESIA
Position Certification Authority

8. PT. KOMARITIM SUBSIDERY STOLT OFFSHORE
Period August 2004 - September 2004
Project Pipeline BETARA DEVOLEPMENT Project
Delivery of Pipe Material at Batam as per Quality Requirement and Tally Sheet
Location Jambi - Indonesia. (Batam for Loading Pipe Material)
Client PT. Sempec Indonesia For PETROCINA
Position Quality Inspector

9. PT. MOODY INTERNATIONAL for ConocoPhillips Indonesia
Period July 2004 – August 2004
Project Belanak Project
Treading,13-3/8" OD 680 PPF L-80 R-3 BUTTRES
Location * PT. CITRA TUBINDO-BATAM
Position Representative Inspector

10.PT. HEAT EXCHANGERS INDONESIA – BATAM
Period May 2003 – 26 May 2004
Position Quality Inspector
Project * Shallow Gass "B" South Jambi (Heat Exchanger and Air Cooled and propane sub cooler)
* Repair Heat Exchanger, Running Test Air Cooler, Repair, in Gass Plant at South Jambi
Client PT. TRIPATRA CONSTRUCTOR FOR Conoco Phillips
* BASSGAS Project (Skid Piping Process with 5 Units Pressure Vessel Duplex Material
Client Process Group Pty. Ltd for Clough
Project ATTAKA UNOCAL (Air Cooler heat exchangers)
Client PT. GUNA NUSA For Unocal
Project SHAKALIN PHASE II ONSHORE
Fabrication of 4 Unit Air Cooler heat Exchangers
Client HITACHI INDUSTRIES. CO.LTD for Sakhalin (Russia)
Project DARWIN LNG PROJECT (79 Unit Air Cooler)
Client BECTHEL AUSTRALIA Pty. Ltd

11. PT. MOODY INTERNATIONAL INDONESIA FOR PT. MC DERMOT
Period February 2003 to May 2003
Project Spart Hole Dominion Devil Tower Project
Fabrication of Devil Tower Platform.
Location PT. MC Dermot – Batam Indonesia.
Client Dominion
Position Quality Inspector

12. PT. DILA PERDANA TEKNIK FOR PT. BATAMEC
Period July 2000 to January 2003
Project All of Project
Shipbuilding and Reparation
Position Superintendence

13. PT. TRIKARYA ALAM FOR PT.ESPRIT
Period 12 March 1997 to June 2000
Project All of Project
Submersible ship for Smit International.ltd
Position QA/ QC Technician

14. PT. LOH & LOH CONT'S IND.
Period 03 September 1996 to 14 January 1997
Project All of Project
Fabrication and Installation Slipway dock yard
Submersible ship for Smit International.ltd
Position Steel Work Supervisor

15. PT. JAYA ASIATIC SHIPYARD
Period 26 September 1994 to 28 August 1997
Project All of Project
330' Barge Building
Position Assistance Yard Superintendence

16. PT. PALMA PROGRESS SHIPYARD
Period 25 August 1993 to 25 September 1994
Project All of Project
Shipbuilding and Reparation
Position Assistance Dock Master, Drafter

18. PT. BAHTERA MUTIARA HANDALAN
Period 25 June 1991 to 24 August 1993
Project All of Project
Shipbuilding and Reparation
Position Assistance Dock Master, Drafter

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6411)

Go to Search Parameters...

Brief Description

Having eleven years experience in field of Oil , Gas & Petrochemical industry

Diploma Mechanical engineer + CSWIP 3.1 + NDT ASNT lev II + ACAD + P3

Passed Matriculation from Bombay Board in English,:Passed Diploma from Kohinoor Technical Institute in Industrial-Elect, Two years course.Attend Safety Training in QATAR GAS, SABIC,ADNOC . HSE Induction,H2S Awareness and Escape. Received Safety Award Certificate from ADNOC on its ongoing projects.

Bachelor of Electrical Engineering [BE] : 5 Years Hands On Experience in Power Utility Company in Medium and Low Voltage System Operations and High voltage 132KV/11KV Substation Protection Systems

Process Engineer, having 2 years of experience in Oil and Gas sector, working in FEED department. Having exposure to Process Simulation tool like HYSYS STEADY STATE HYSYS DYNAMIC SIMULATION, ASPEN PLUS, SULSIM and Equipment Design/Rating Software like HTRI, HTFS, KG TOWER, and SULCOL.

I am presently employed with Black&Veatch, a US based reputed company doing mainly Oil &Gas and EPC projects mainly in power plants.

Process engineer with two years of experience in the feild of basic enginnering, front end engineering design and precommissioning and commissioning of process plants.

Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced

Development, maintenance and utilization of the full field reservoir simulator

I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.

Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.

PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.

•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,

Drilling supervision and engineering, well control instructor, rig commessioning

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530

Electronics Technician / Telecom / SATCOM / Electronic Tools

Specialised in PROJECT & PRODUCTION MANAGEMENT ,QUALITY , MANUFACTURING, HSE

Proficient in CAESAR II, Korf Hydraulics, AutoCAD, Primavera and MS Office.

ESSAR OIL LTD- FCCU (May 2005 to May 2008)

18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.

B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems

Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard

2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out