Resume - Process Design Engineer (B.E. Chemical)

Misco Jobs

Resume #67222

CONTACT INFORMATION:
View contact information...

OBJECTIVE

To utilize my talent, education and skills for the betterment of organization and to boost up my career in a well challenging environment.

EXPERIENCES

Approx. Three years of working experience in Petrochemical, Petroleum (Operation) and Oil & Gas Project (Designing) experience in different organization like:

1. ENAR PETROTECH SERVICES (PVT.) LTD.

Currently working with ENAR PETROTECH SERVICES (PVT.) LTD. as a Process Design Engineer.

COMPANY PROFILE:

ENAR Petrotech Services is under the management of Ministry of Industries and Production, Govt. of Pakistan. Dealing with the Designing of Well Head Gas Production Facilities, Refinery's Processes, Inspection of LPG units and engaged with the Oil and Gas matters throughout Pakistan.

JOB DESCRIPTION:

* We are engaged to design PFD's, UFD'S, P&ID's, Design Basis, Scope of Work, Process & Material selection study and over all Process Simulation of the Projects.

* Now a days working on a ongoing Refinery's Project like Fuel & Lube Refinery, installed at Port Qasim, Used Fuel refinery installed at KP at Hub, Gas refining & dehydration facilities like Qadirpur Compression Project, Kunnar & Bobi LPG plant, Bahu production facility and Mari Gas Production Facility Project.

2. NOVATEX PETROCHEMICAL Limited

One year worked with a Petrochemical Plant, NOVATEX Limited as a Process Engineer

COMPANY PROFILE:

A German plant Capacity of 380 Tons/day Producing BGC (Bottle Grade Chips), Textile grade chips, Preforms of PET Bottles.
Also worked with Chinese in erection of it's newly constructed Chinese technology plant capacity 1000 Tons/day, and performing the master start up of SSP (Solid State Polymerization) with the technical team of SINCO Italy.

JOB DESCRIPTION:

Monitoring the process performance of following equipments:
DCS Controlling, Handling of Ethylene Glycol & PTA (Pure Tera Phatalic Acid, Reactors, Heat Exchangers, Condensers, Boiler, Pumps, Compressor, Furnaces, Cooling Tower Ion Exchangers.

* Worked with National Refinery Ltd. & Pakistan Refinery Ltd. as a Trainee Engineer in Internship Program and for Final Year Project.

FINAL YEAR PROJECT:

Supervised my Final Year Project in the collaborations with leading Refineries in the Pakistan (Pak Arab Refinery, Pakistan Refinery, and National Refinery) on "Recovery of LPG from Off-Gases in Fuel Refinery. Particulars are

* Introduction of LPG.
* LPG Recovery Units working in Refineries of Pakistan.
* Treatment & Testing of LPG.
* LPG recovery Units from Natural Gas Liquids.
* Production of LPG at Oil Refineries.
* Present LPG Production Companies in Pakistan.

PROFESSIONAL QUALIFICATION:

B.E. in Chemical Engineering (Accredited by Pakistan Engineering Council) from Dawood College of Engineering & Technology, Karachi in FEB 2005, with first division.

ACADEMIC QUALIFICATIONS:

* Higher Secondary Certificate from DJ Sind Govt. Science College, Karachi with First Division (64%) in 1999.

* Secondary School Certificate from K.R.L Model College, Islamabad with First Division (71%) in 1997.

COURSES:

* Completed short courses on the following topics from Technical Training Department of Fauji Fertilizer Plant Port Qasim.

* Personal/Plant Safety * Boiler / Valves Operation *Fires & Types
* Extinguisher * Work Permit Procedure * Steam Trap
* Piping System * Instrumentation * Pump
* Press / Temp Measure. * Gas Turbine * Compressors
* Level Indicators * Flow Measurements * Welding

* Attended two weeks short course on Nuclear Engineering from Atomic Energy Commission on 25 Sep 2004.

* Taken extraordinary Fire Fighting course, Hazards & Safety Training program from Fauji Fertilizers Company.

ACHIEVEMENTS:

* Got special prize from Dr. A.Q. Khan in 1996, an inter collages debate competition held in Islamabad.

* Got special prize (Rs.10, 000) in July 1997 from Illahi Bux Sumro (Speaker National Assembly) in "Eighth All Pakistan Software Competition & Exhibition" organized by Dr. A.Q. Khan Laboratories.

* Got the Certificates of Appreciation & Achievement for holding the programs & activities for engineering students from Engr. Khalid Qureshi (Chairman of IEP, Karachi Centre) and Engr. M.P. Gangwani (President of IEP), during 2000-2004.

* Got many certificates in debating at Inter Collages Level.

* Deputy Conveyor of Dawood Engineering College Student Affairs Dept. & Student Chapter Organization in Institution of Engineers Pakistan (IEP, opposite to Reagent Plaza).

PERSONALS:
* Religion: Islam
* Nationality: Pakistani
* Domicile: Karachi
* Marital Status: Single
* P.E.C. Reg. Number: CHEM / 5599
* Date of Birth: 23rd January, 1981
* Computer literacy: Visual Basic, Auto Cad, MS-Office, C++
* Languages: English, Urdu (Mother Tongue).
* Hobbies & Interests: Computer Programming, Snooker, Current Affairs & Music.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 6411)

Go to Search Parameters...

Brief Description

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Mechanical, Estimate/proposal engineer

Chemical engineer from pune university, looking for job in oil field .1 year exeprience in production unit

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Instrument Engineer working in Consolidateed Contractos International company,Qatar.Working here in pre comissioning especially in loop checking and function tests . Have experience in DCS Foxboro and PLC Triconex with Invensys Systems.Working under Chiyoda Technip joint Venture for RasGas project-2

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Lead Inspector For Pipe mill team for Kinder Morgan project ,Anadarco petrolium project from last six months.good command on handling team. For Onesty first priority

I am a graduate civil engineer.I am proficient in: Pdms11.6, Staad pro (Certified by engineering staff college, Bangladesh), Etabs, AutoCAD, Micro Station-V8, Microsoft Visio & Ms Office.

Planning, Scheduling, Computerized Maintenance Management System - CMMS,

I believe my experience and solid record of achievement make me an ideal candidate for any engineering position within your organization. My enthusiasm for the position and my interest in working for your Company were strengthened as a result of searching.

Diploma course in autocad, working as a design engineer for past 1 year

I am a hard worker, willing to learn a new thing, initiative and creativities problems solver. I have qualities such as good personality, strong communication skills, and excellent ability in team working. I can communicate well with other people and enjoy being part of a team-work, especially if it

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

Solid academic formation in petroleum engineering. Native Spanish speaker, proficient in English. Computer literate in Autograph (Esp design), FoxPro (inventories), and MS Office. Available immediately, willing to travel and / or relocate.

Analyzer Engineer

Instrumentation and Control Engineer

Lifting Equipment Inspection Engineer, Senior Welding Inspector, Material Inspector, Product Inspector.

I have 1 year field experience and 2 year off-shore process design experienced.

B.E,HAVING SKILLS IN PDMS 11.5,UNDERSTANDING P&ID'S ,preparation of piping layouts

Welding , QC , WPS , PQR , WQP, Inspection , NDT

Process Design Engineer (B.E. Chemical)

40 years, Production, Workover, Drilling Supervision, Land and Offshore

Degreed chemical engineering with an Engineer-In-Training certification and two years of process engineering experience.

I am a self motivated and well inspire graduate of Geology. With Junior to intermediate level job experience in Petroleum geology. With interest in reservoir engineering, mud logging, well logging, reservoir geology, wellsite geology, log interpretation, data entry and field engineering

I have very good experience in field management in installation, commissioning of rotating equipments and auxiliary systems such as pumps, diesel generators, compressor etc. and pipe works including piping systems. In selecting the types and standards for static equipments.

Instrument/Process Control engineer with more than 17 years of experience in Plant/Project engineering, construction and commissioning of Gas/Condensate and petro chemical industries.

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

Senior Planner / Scheduler

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out