Resume - Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refinin...

Misco Jobs

Resume #67352

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To add value and increase depth of knowledge and growth in the field of engineering through with a view to continually develop myself as a capable and technically competent senior engineering professional, adding value to the industry for the benefit of my employer, my colleagues and myself.

PAST EMPLOYMENT
Fluor Daniel South America Limited
(On 18-month assignment to Houston Office)
Process Engineer III – April 2007 – Present

Duties (DMS Removal Project Pre-FEED Study)
- Carried out HYSYS process simulations of alternative technologies for removal of contaminants from natural gas and liquid hydrocarbon streams.
- Developed process flow diagrams (PFDs), equipment lists and heat and material balances (HMB) for alternative technologies for removal of contaminants from natural gas and liquid hydrocarbon streams.
- Carried out preliminary equipment sizing for alternative technologies for removal of contaminants from natural gas and liquid hydrocarbon streams.
- Write process engineering reports for alternative technologies for removal of contaminants from natural gas and liquid hydrocarbon streams.
- Carried out sensitivity analyses for alternative technologies for removal of contaminants from natural gas and liquid hydrocarbon streams.
- Represented process engineering interests in HAZID studies.
- Mentored and Supervised summer interns.
- Developed and fostered working relationships with equipment vendors and service companies.

Duties (Starfish Development Project Pre-FEED and FEED)
- Write basis of design document for pre-FEED.
- Carry-out process simulations of various platform separation cases including offshore gas compression.
- Generated Heat and Material Balances for various cases.
- Performed preliminary equipment sizing for major process equipment.
- Project currently in early pre-FEED stage and work is on-going.

Atlantic LNG Company of Trinidad and Tobago (ALNG)
Principal Engineer (Process) – February 2007 – April 2007
Senior Process Engineer (Engineer II) - January 2006 – January 2007
Duties
- Design and modeling of APC for Trains 1, 2, 3
- Capital expenditure project conceptualization and implementation for plant optimization
- Supervision of Junior Engineers.
- Preparation of project justification documents/feasibility studies
- Implementation of Advanced Process Control on Trains 1-3
- Daily process engineering troubleshooting and carryout technical analyses/provide advice
- Lend process engineering skills for Train 4 Acceptance Test
- Risk assessment, HAZID and HAZOP Studies
- Defrost of LNG Trains
- Sulphur in Natural Gas Liquids (NGLs) Studies/Solutions
- Flare rationalization on LNG Complex
- Process Optimization
- Operator Training

Petroleum Company of Trinidad and Tobago Limited (PETROTRIN)
Senior Process Engineer – August 2004 - October 2005
Process Engineer II – October 2002 – July 2004
Process Engineer I - October 2000 - 2002
Trainee Engineer - November 1999 - September 2000
Duties
- Refinery Operations – Crude oil processing
- Process Design – heat exchangers, separators, pumps,distillation columns, control valves, line sizing, storage tanks, etc.
- Process Monitoring
- Optimization of Refinery Processes and Energy Consumption
- Special projects
- Product Treatment/Specifications and Storage
- Bitumen Blending Operations
- Revamp of Process Units – including FEED studies
- Crude Oil handling and Treatment
- Corrosion Monitoring/Treatment
- Training of Refinery Operators
- Supervision of Graduate and Student Engineers

The University of Trinidad and Tobago (UTT)
Duties Part-Time Lecturer in Diploma and Bachelor of Engineering Programmes – May 2004 - Present
- Industrial Applications/Process Engineering
- Process Design and Computer Simulation
- Chemical Engineering Calculations
- Petroleum Refining and Petrochemicals Technology
- Petroleum Engineering Science I
- Transport Phenomena
- Reaction Kinetics

WorleyParsons Trinidad Limited
Duties: Senior Process Engineer – October – December 2005
- Assisting with detailed engineering design of BGTT Central Block gas processing plant - control and relief valve sizing.

EDUCATION
Sept. 2002 – 2005: The University of the West Indies, St. Augustine
Master of Science – Petroleum Engineering

1996 - 1999: The University of the West Indies, St. Augustine
Bachelor of Science - Chemical and Process Engineering Upper Seconds (Hons.)

COURSES ATTENDED
- Fluor Daniel Experienced Hires Process Design Training School
- Fantoft Dynamic Process Simulation Training
- Fundamentals of Process Control (Expertune)
- Honeywell Process Industry Alarm Management Workshop
- Primavera Project Planner Software
- Thermal Cracking Course (Shell Open University, Holland)
- Safety in Process Design (Shell Open University, Export)
- Simulation Processes using HYSYS
- Advanced Control of Petroleum Refinery Processes (Part I)
- Understanding Engineering Drawings
- Fundamentals of Cooling Tower Treatment
- Basic Health, Safety and Environment (HSE)
- Microsoft Project and Access (Basic)

EMPLOYABILITY SKILLS:
1) Passionate about learning, mentoring and knowledge transfer.
2) Excellent oral and verbal communication skills.
3) Strong technical report writing acumen.
4) Capable of being an efficient and dynamic team player.
5) Capable of organizing, prioritizing and being flexible.

COMPUTER LITERACY
Working Knowledge of Visio Professional Drawing, Primavera,HYSIS, STX and General Equipment and Materials Specifications GEMS), MS Windows including Microsoft Office and Project, D-Spice

MISCELLANEOUS:

NATIONALITY Citizen of Trinidad and Tobago
SEX Male
MARITAL STATUS: Single

CLUBS OF INTEREST
- Associate Member, Institute of Chemical Engineers (UK Based)
- Society of Petroleum Engineers (SPE)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6411)

Go to Search Parameters...

Brief Description

Presently I am working with ABB Lummus, Singapore in the post of Senior Structural Engineer.

GNPOC(Grater Nile Petroleum Operating Co.Ltd.Sudan.Through Ipedex. Senior Production Operator in CPF. Since Dec 2nd 2004

Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience and 5 years engineering/planning experience.

1. 16 years of experience & 14 years as Licensed Engineer. 2. Problems Solver with high standards of quality. 3.

Drilling supervisor with 19 yrs of experience on land rigs exploratory, development, workover , horizontal, multilateral wells available . Excellent communication skills, result oriented, get after it attitude, hard working , safe approach, overseas experienced. IWCF valid. References on request.

i can all design for instrument Offshore & Onshore

Electrical Engineer, QA/QC Engineer, Pre-commissioning Engineer

Foreman/Mechanic in the feild of Diesel generator,I T I Fitter, 25 Year Experience

I am familiar with EPC design practices and adaptable to the development and change management of works in progress, right from feed stage through detailed engineering till upgrading and expansion / revamp, within the specified limits of scope of work and beyond my defined role of functions, from co

Piping Engineer with 14 years of expereince

BTech Electrical , 11 years exp in Refinery, Petrochemicals, Oil & Gas Plants

Middle to senior level assignments in plant maintenance, machine utilization & Control with an organization of repute.

I am chemist in oil industry

Drilling Engineering Advisor with over 20 years experience at various positions in drilling, including over 15 years international experience. Have experience as mud engineer, drilling fluids supv, drilling engineer, rigsite drlg supervisor, drlg superintendent and drlg project manager.

i have diploma engr in mech engg. having 18 years expr. of maintanance of processand power plant equipment

I am B.E. (Electronics & Communication) with 10 yrs. exp. as a QA/QC Engg in Oil & Gas Plants, Power Plants, Fertilizer Plants, Sea Water Plants in OMAN, K.S.A, UAE,QATAR with ARAMCO, PDO, DEWA, QAFCO and i am aprroved QC Engg & Inspector in instrumentation and Telecommunication

I am looking for a job in the marine sector. I have worked on board Tankers, OBOs, Bulkers and Container ships. I am an ex cadet of Bangladesh Marine Academy, Ctg. I did an Advanced Diploma in Marine Engineering from Singapore Polytechnic. I also hold a Singaporean Class 1 COC.

Dedicated professional with 18+ years of experience in • Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs

11 years on instrumentation chemical and petrochemical plant, maily handle EMERSON DeltaV/Honeywell TDC3000/FF instrument

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

Design Engineer, Project Engineer, AutoCAD designer

Maintenance Engineer (rolling mills)

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

Estimation Engineer - Instrumentation.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

Performing work as per international standards following operational excellence management system

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I am diploma engr in mech. engg. having 18 years expr. in maint. of process plnat equipment

Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refining, Liquefied natural gas (LNG) production and gas processing, process design, Offshore oil and gas platform deisgn (topsides), process simulations (Hysys), conceptual process design, detailed process design, Training.

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Proficient in Accident/Incident Reporting and Investigation, HAZOP, HAZID, Risk Assessment (JSA), Implemented and periodical measurement of HSEMS Program; Provided assistance and advise to plant management, supervision and employees on HSE matters; WHMIS, Hazardous Waste Management

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out