Resume - wireline specialist and downhole gauges engineer

Misco Jobs

Resume #67387

CONTACT INFORMATION:
View contact information...

Career Profile:
Petroleum Engineer with six years in oil field and I can perform the following jobs:-
-All slick line operations (pulling &running operations of DHVs, Protection sleeves, plugs, SSDs, GLVs, CV, CIV, Ameradas, E/Gauges, QMS, MPLT, Bridge plugs, Slick plug, fishing tools,…..etc. ).
-GOOD experience in slick line tools (maintenance, repairing and using).
- maintain and repair wire line & logging unit (power pack, winch).
- maintain and repair hydraulic system and filters changes.
-Electric line pressure control equipments handling and maintenance.
-SONDEX memory production logging tools MPLT (running procedure, maintenance, programming, reading and software treatments).
-GRC EMS/QMS gauges (preparing, programming, reading and reporting).
-SPARTEX gauges (preparing, programming, reading and reporting).
-Theoretical knowledge about liner and completion calculations and running procedure and ready to learn more within limited time.

Employment History:
SETADEL company (Egypt) 10/11/1999 – 15/07/2002
Since 07/08/2002 till now in Al-Mansoori Specialized Engineering (United Arab Emirates) in wire line division with the following companies:-
AS WIRE LINE OPERATOR:
* ADCO (UAE)
* TOTAL FINA ELF (IRAN)
* ZAKIUM FIELD DEVELOPMENT COMPANY (UAE)
* BANGORA FIELD (TULLOW/BANGLADESH).
* MARGAM FIELD (UAE).
* CPC SHARJA (UAE).
AS WIRE LINE CHIEF OPERATOR:
* BANGORA FIELD (TULLOW/BANGLADESH).
* DOLPHIN ENERGY (QATAR).
* SYLHET GAS LIMITED (BANGLADESH).
AS WIRE LINE CHIEF OPERATOR:
* SYLHET GAS LIMITED (BANGLADESH).
* DOLPHIN ENERGY (QATAR).
* BANGORA FIELD (TULLOW/BANGLADESH).
AS WIRE LINE SUPERVISOR:
* SYLHET GAS LIMITED (BANGLADESH).
* BANGORA FIELD (TULLOW/BANGLADESH).

Job Responsibilities included the following:
Maintaining and updating both standard and per customer's request wireline (pulling & running equipment) operations.
Performing the required work permit.
Discussing each "specific job assignment" preliminary requirements and customer's operating circumstances.
Carrying out the "Pre-job internal operation review" with field hands.
Following the standard safety roles.
Issuing the required equipment, tools and consumables (down-hole etc.) from the company warehouses.
Leading the work team for the preparation/redressing of the required equipment assemblies and tools at the workshop (with special emphasis on the workshop related safety aspects which is communicated in every day's pre-job safety meeting).
Run downhole tools in: ADCO, ZADCO, CPC and Margam fields (UAE), TOTAL FINA ELF: Bilal field (IRAN), TULLOW BANGORA and SYLHET GAS LIMITED (BANGLADESH) and Dolphin Energy (Qatar).
Carrying out the required maintenance and testing for both slick line and electric line pressure equipments and tools
Professional Training:
-GRC EMS/QMS gauges course in MRDAS (Abu Dhabi/ UAE).
-SONDEX Production Logging Tools in MRDAS (Abu Dhabi/ UAE).
-IADC wire line international course in GTSC (Abu Dhabi/ UAE).
-Safety courses includes:-
H2S, Fire Fighting, Basic First Aid, Sea Survival and Safe Lifting Sling
Courses in (G.T.S.C) (Abu Dhabi/ UAE) and H2S and Sea Survival course in Venture Gulf

Training Center (Doha/Qatar)
-Computer courses (1&2) in Al-Mansoori IT division (Abu Dhabi/UAE).

Education:
B.Sc. of Petroleum Engineering from Al-Azhar University Cairo Egypt.
Grade: Good.
Graduation Project: July field 1973 (Gulf of Suez Petroleum Company-GUPCO-Egypt).
Grade: Good.

Education courses:
Oil and gas wells drilling engineering course.
Oil and gas wells production engineering course.
Oil and gas reservoir engineering course.
Oil and gas reservoir stimulation engineering course.
Oil and gas pipe lines (hot & cold) and storage tanks design course.
Oil and gas refinery engineering course.
Natural gas and petrochemical plants design engineering course.
Oil and gas industry economics course.
Thermodynamic& heat engine and Machine design courses.
Petroleum geology course.

Personal Data:
Date of birth: 05/09/1974
Place of birth: Egypt.
Nationality: Egyptian.
Marital state: Married and have one boy (Ahmed).
Health Category: one Blood Group: O Length: 182 cm

Language
Arabic: Mother tongue.
English: Very Good command of both spoken & writing.

COMPUTER SKILLS
* MS- WINDOWS XP and Vista.
* MS – OFFICE 2003&2007.
* INTERNET.
* MS-Quick &Visual Basic6.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 6635)

Go to Search Parameters...

Brief Description

Experience in project and construction management of EPC projects in the Oil and Gas Industry and building projects

Project engineerig

Worked as Civil/Structural desgner and piping as well. Perform basic design calculation, planning, scheduling, project evaluation, specifications, bill of materials & cost estimates.

Transmission Engineer for Fiber Optics, Microwave & VSAT System w/ 20 yrs experience

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

PIPING STRESS ENGINEER

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Project Planner/Scheduler/Controller with experience in the oil & gas, EPC and Construction industry. Involved in Planning, Scheduling, Project and Cost Control.

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.

Reservoir and Production Engineer

yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC

I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.

wireline specialist and downhole gauges engineer

Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

Managing operations, especially in technical management, supervising and engineering of all aspects and activities in petroleum up-stream operations.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)

Corporate QA Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out