Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #67724 next resume »»
CONTACT INFORMATION:
View contact information...

Ph.D, Process Design & Control

OBJECTIVE
Process engineering position and a willingness to work hard and contribute to team goals
KEY SKILLS: Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006; ASPEN PLUS-11.1 etc)
PRESENT POSITION: Post doctorial researcher and deal with following projects
May 2007-Present Postdoctoral Fellow, Process System Design & Control Lab, Yeungnam University, South Korea
Adviser: Professor Moonyong Lee
Presently deal with the plantwide design and control of the LNG liquefaction system, Structure design and separation characteristics for divided wall distillation column
CURRENT SALARY: 25000 $ (USD per year)
EXPECTED JOINING DATE: Decide after agreement
TOTAL EXPERIENCE: Approximately six month as a post doctorial researcher and Ph.D
SUMMER INTERNSHIP
Summer 1997: Barauni Oil Refinery, Indian Oil Corporation, Dist: Begusarai, India
EDUCATION
* Ph.D Chemical Engineering (Process Design & Control), May 2007, Yeungnam University, South Korea
* Thesis title: "Advanced Design for Enhanced Performance of Model Based PID Controller for Process Industry"
* Adviser: Professor Moonyong Lee, Yeungnam University, Korea
* M.S Chemical Engineering (Petrochemicals), June 2002, A.M.U., Aligarh, India
* M.S dissertation title: "Incipient Boiling in the Vertical Thermosiphon Reboiler"
* B.S Chemical Engineering, May 1999, A.M.U., Aligarh, India
RESEARCH EXPERIENCE
May 2007-Present Postdoctoral Fellow, Process System Design & Control Lab, Yeungnam University, South Korea
Adviser: Professor Moonyong Lee
Presently deal with the plantwide design and control of the LNG liquefaction system, Structure design and separation characteristics for divided wall column
September 2003~May2007 Graduate Research Assistant (Ph.D)
Advance control algorithm design for the process industries (Single input single output, multiple input multiple output, Smith predictor, Parallel and series cascade control).
July 1999~June 2003 M.S and Graduate Research Assistant
The primary research issue to study the hydrodynamic and heat transfer aspects of the single vertical tube thermosiphon reboiler, (theoretical and experimental aspects)
SUMMARY OF ACHIEVEMENTS:
* Biography published in "Marquis Who's Who in World" 29th Edition 2008.
* Best paper award in KIChE (Korean Institute of Chemical Engineers) Conference October 27~28, Korea University, Seoul, Korea.
* Biography published in "Marquis Who's Who in America" 62th Edition 2008.
* Biography published in "Marquis Who's Who in Science and Engineering" 10th Edition 2007-2008.
* Biography published in "Marquis Who's Who in Science and Engineering" 9th Edition 2006-2007.
* Scholarship in Ph.D course from Yeungnam University, South Korea.
* Award for the participation in the PETROTECH-2003, New Delhi.
* Student scholarship award in the ICONE –11, in 2003, Tokyo, Japan.
Editorial Boards:
The Open Mechanical Engineering Journal (http://www.bentham.org/open/tomej/index.htm)
PROFESSIONAL ACTIVITIES
* Member of American Institute of Chemical Engineers (AIChE)
* Member of Korean Institute of Chemical Engineers (KIChE)
* Member of Institute of Electrical and Electronics Engineers (IEEE)
LANGUAGES AND ADDITIONAL INFORMATION:
Professional Level: English, Hindi, and Urdu; Basic Level: Korean
Interests: Social services, human services, youth development, adult rehabilitation, Computer skills
PROJECT REPORT UNDERGRADUATE:
* Development of new flow meter (senior/final year)
* Techno economic feasibility report on production of ethylene from natural gas (senior/final year)
* Detail design of distillation column (junior/pre-final year)
* Seminar presentation and report writing for the Bisphenol-A, process and its uses (junior/pre-final year)
PERSONAL:
Place of Birth: Begusarai (India)
Date of Birth: 1st January 1978
Marital Status: Single
Father's Name: Md. Kalim Uddin
Citizenship: Indian
Passport No: A-8145483
Sex: Male
PERMANENT ADDRESS
At: Qusba, Po: Hussaina, Via: Lakhmina, Dist: Begusarai (Bihar), India-851211
LIST OF PUBLICATIONS (Refereed Paper in Journals, SCI Listed)
* M.Shamsuzzoha and Moonyong Lee, "Enhanced disturbance rejection for open-loop unstable process with time delay of two-degree-of-freedom control scheme", (submitted in Chemical Engineering Research and Design).
* M.Shamsuzzoha and Moonyong Lee, "PID control strategy for open-loop unstable processes with positive and negative zeros and time delay", (Communicated in Journal of Process Control).
* M.Shamsuzzoha, and Moonyong Lee, IMC based method for control system design of PID cascaded filter (Communicated in journal of computer and chemical engineering).
* M.Shamsuzzoha and Moonyong Lee, "IMC Based PID Tuning of the Integrating Process with Time Delay", (in press The Korean Journal of Chemical Engineering).
* M.Shamsuzzoha and Moonyong Lee, "Design of advanced PID controller for enhanced disturbance rejection of second order process with time delay", AIChE, Vol. 54, No. 6: June 2008.
* M.Shamsuzzoha, and Moonyong Lee, "Analytical design of enhanced PID* filter controller for integrating and first order unstable processes with time delay" Chemical Engineering Science, Vol. 63, 2008, PP. 2717-2731.
* M.Shamsuzzoha, and Moonyong Lee, "An Enhanced Performance PID Filter Controller for First Order Time Delay Processes" Journal of Chemical Engineering of Japan, Vol. 40, No. 6: pp.501-510, June 2007.
* M.Shamsuzzoha, and Moonyong Lee, IMC-PID Controller Design for Improved Disturbance Rejection" Ind. Eng. Chem. Res, Vol. 46, No. 7: March 28, 2007, PP. 2077-2091
* M.Shamsuzzoha, and S. S. Alam, "Effect of Bubble Turbulence and Submergence on Boiling Incipience in Vertical Thermosiphon Reboiler," Heat Transfer Engineering, Vol. 29, No. 3, pp. 306-320, 2008
* M. Kamil, M.Shamsuzzoha, and M. Abdul Hakeem, "Analysis of Incipience of Nucleate Boiling in a Reboiler Tube", AIChE Journal, Vol. 53, No. 1, pp. 39-50, 2007.
* M.Shamsuzzoha, Moonyong Lee and S. S. Alam, "The Determination of Superheated Layer Thickness and Wall Superheat in Vertical Tube Natural Circulation Reboiler", Applied Thermal Engineering, Vol. 25, No. 13, pp.1961-1978, 2005.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Effect of Submergence on Boiling Incipience in a Vertical Thermosiphon Reboiler", International Journal of Thermal Sciences, Vol. 44, No. 1, pp.75-87, 2005.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Conditions of Onset of Boiling in a Vertical Thermosiphon Reboiler" Journal of Thermophysics and Heat Transfer, Vol. 18, No. 4, October–December 2004.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Onset of Boiling Analysis in a Reboiler Tube" Oil Asia Journal, 2004.
PRESENTED IN CONFERENCE (Refereed Proceedings Papers)
* M.Shamsuzzoha, and Moonyong Lee, IMC Based PID Controller Tuning Method for the Integrating Process with Time Delay, 2008 KIChE Spring Meeting, April 23~25, ICC, Jeju, Korea.
* M.Shamsuzzoha, and Moonyong Lee, "Enhanced performance of PID controller design for second order processes with time delay", 07 AIChE Annual meeting, Salt Lake City, Utah, USA.
* Seunghyun Lee, M.Shamsuzzoha, and Moonyong Lee, "Structure Design and Separation Characteristics for Divided Wall Column", 07 AIChE Annual meeting, Salt Lake City, Utah, USA.
* M.Shamsuzzoha, and Moonyong Lee, "Enhanced performance for two-degree-of-freedom control scheme for second order unstable processes with time delay", ICCAS 2007, October 17-20, COEX, Seoul, South Korea.
* M.Shamsuzzoha, Sehun Kim and Moonyong Lee, "PID.filter Controller Design for Integrating Process with Dead Time and Inverse Response", The Institute of Control Automation and System Engineers, Korea, 31 May-2 June 2007, Pusan, South Korea..
* M.Shamsuzzoha, and Moonyong Lee, "Design of PID Controller Cascaded with Filter for First Order Time Delay Process", EPIC 2007, European Process Intensification Conference, Copenhagen, September 19-20, 2007, Copenhagen, Denmark.
* M.Shamsuzzoha, and Moonyong Lee, A Simple Two-Degrees-Of-Freedom Control Strategy for First Order Time Delay Processes, The ninth IASTED International Conference on Control and Application ~CA 2007~ May 30-June 1, 2007 Montreal, Quebec, Canada.
* M.Shamsuzzoha, and Moonyong Lee, PID Controller Design for the Dead Time Dominant Unstable Process, The ninth IASTED International Conference on Control and Application ~CA 2007~ May 30-June 1, 2007 Montreal, Quebec, Canada.
* M.Shamsuzzoha, and Moonyong Lee, A Simple Analytical Controller Design for Integrating and First Order Unstable Time Delay Process, 2007 KIChE Spring Meeting, April 19~20, Lotte Hotel, Ulshan, Korea.
* M.Shamsuzzoha, and Moonyong Lee, PID Controller Design Strategy for First Order Delay Processes, 2007 KIChE Spring Meeting, Lotte Hotel, Ulshan, Korea.
* M.Shamsuzzoha, and Moonyong Lee, "Analytical Controller Design of Integrating and First Order Unstable Time Delay Process", Paper No. 219, DYCOPS 2007, The 8th International Symposium on Dynamics and Control of Process, June 4-6, 2007, Cancún, México.
* M.Shamsuzzoha, and Moonyong Lee, "Improved Analytical PID Controller Design for the Second Order Unstable Process with Time Delay", Paper No. ID-T3-407, ESCAPE 17, 2007, 17th European Symposium on Computer Aided Process Engineering, May 27-30 2007, Bucharest, Romania.
* M.Shamsuzzoha, and Moonyong Lee, "Robust PID Controller Design for Disturbance Rejection of Complex Time Delay Processes", Paper No. 850, PETROTECH-2007, 7th International Petroleum Conference and Exhibition, Vigyan Bhavan, January 2007, New Delhi, India.
* M.Shamsuzzoha, and Moonyong Lee, "Adaptive IMC Control for Blood Pressure Regulation in Post Cardiac Surgery Patients", InCoB 2006, International Conference on Bioinformatices-2006, December 18-20, 2006, New Delhi, India.
* M.Shamsuzzoha, and Moonyong Lee, "Robust PID Controller Design of Time Delay Processes with/without Zero", IEEE ICIT 2006, IEEE international Conference on Industrial Technology, December 15-17, 2006, Mumbai, India.
* M.Shamsuzzoha, and Moonyong Lee, "Design of Robust PID Controller for the Unstable Dead Time Dominant Processes", 2006 KIChE conference, October 27~28, Korea University, Seoul, Korea.
* M.Shamsuzzoha, Junho Park and Moonyong Lee, "PID Controller Design for Unstable Process with Negative/Positive Zero", 2006 KIChE conference, October 27~28, Korea University, Seoul, Korea.
* M.Shamsuzzoha, and Moonyong Lee,, "Tuning of Integrating and Integrating Processes with Dead Time and Inverse Response", 2006 KIChE conference, October 27~28, Korea University, Seoul, Korea.
* M.Shamsuzzoha, Junho Park and Moonyong Lee, "IMC Based Method for Control System Design of PID Cascaded Filter" 2006 KIChE Spring Meeting, April 20~21, Hotel Interburgo Taegu, Korea.
* M.Shamsuzzoha, and Moonyong Lee, "Design of Robust PID Controllers for Unstable Processes", SICE-ICASE International Joint Conference 2006, October 18-21, Busan, South Korea.
* M.Shamsuzzoha, and Moonyong Lee, "IMC Based Control System Design of PID Cascaded Filter", SICE-ICASE International Joint Conference 2006, October 18-21, Busan, South Korea.
* M.Shamsuzzoha, and Moonyong Lee, "Robust PID Controller Design for Dead Time Dominant Unstable Process", The Institute of Control Automation and System Engineers, Korea, 1-3, June 2006, Seoul, South Korea.
* M.Shamsuzzoha, Kihong Lee, Moonyong Lee and Jietae Lee, "IMC-PID Controller Tuning for Improved Disturbance Rejection of Unstable Time Delay Processes", 2005 KIChE conference, October 21 ~ 22, Inha University, South Korea.
* M.Shamsuzzoha, Kihong Lee, Moonyong Lee and Jietae Lee, "Design of IMC-PID Controller for Improved Disturbance Rejection of Time Delayed Processes", PSE ASIA 2005, International Symposium on Design, Operation and Control of Chemical Processes, August 18-19, 2005 Seoul, South Korea
* M.Shamsuzzoha, Kihong Lee, Moonyong Lee and Jietae Lee, "Design of IMC-PID Controller for Improved Disturbance Rejection of Time Delayed Processes" KIChE conference, April 22 ~ 23, 2005, Yosu National University, South Korea.
* M.Shamsuzzoha, Kihong Lee, Moonyong Lee and Jietae Lee, "Design of IMC Filter for Improved Disturbance Rejection of PID Controller", 2004 KIChE conference, October 29 ~ 30, Hoseo University, Asan, South Korea.
* M.Shamsuzzoha and Moonyong Lee, "Extension of Generalized IMC-PID Tuning Method to General Frequency Region", KIChE conference, April 23 ~ 24, 2004, Kongju National University, South Korea.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Effect of Bubble Turbulence and Submergence on Onset of Boiling in Natural Circulation Loop", Paper no HT2003-47230, ASME Summer Heat Transfer Conference, July 21-23, 2003, USA.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "The Determination of Superheated Layer Thickness for Boiling Incipience in a Vertical Thermosiphon Reboiler", Paper No-ICONE36123, ICONE –11, Eleventh International Conference on Nuclear Engineering, April 20-23, 2003, Shinjuku, Tokyo, Japan.
* M.Shamsuzzoha, M.Kamil and S.S.Alam "Boiling Incipience Analysis in a Vertical Thermosiphon Reboiler", Paper No. SM1, HEFAT-2003, 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, June 2003, Victoria Falls, Zambia
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Onset of Boiling Analysis in a Reboiler Tube" I.D.No.721, Paper No.R068, PETROTECH-2003, 5th International Petroleum Conference and Exhibition, Vigyan Bhavan, January 2003, New Delhi,
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Mathematical analysis of incipient boiling in a vertical thermosiphon reboiler", Paper No. 88, Proceedings of APM2002, 3rd International Conference on Computational Heat and Mass Transfer May 26-30, 2003, Banff, Canada.
* M.Shamsuzzoha, M. Kamil, and S. S. Alam, "Boiling Incipience in a Vertical Reboiler." Paper No.VII-9, 17th National Heat and Mass Transfer Conference and 6th ISHMT / ASME Heat and Mass Transfer Conference, January 5-7 2004, Kalpakkam, India.

REFERENCES
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4001 to 4050 of 6635)Go to Search Parameters...
Brief Description
I am piping engineer with diploma in mechanical engineering to Poli- Technic institute "GH.Asachi" Iasi, Romania
Around 4 years of work experience in Field and Research areas. Willing to work in an integrated and friendly environment. Comfortable in communicating with all levels and ability to adapt to various team situations.
Draughtsman Mechanic (Autocad Operator)
Present function: Software developer
Safety officer - Graduation in BA--- _ Engineering Diploma in Safety-----
Diploma Mechanical Engineer with five years experience in Project Procurements
Industrial Engineer (Quality, Production, Customer Care, Suppliers)
I have a variety hands on work experience in electrical field troubleshooting and installation of electrical/instrumentation circuit,PLC programmable logic controller and power plant generating units gas/steam and diesel generators.
Use of application packages &soft wares such as MS Word, Excel,AutoCAD(2000-2007) for generations in 2D, 3D & Isometric,PDMS. I-Sketch,M.T.O generation (Alias),Acrobat Adobe Reader.Familiar with PIPEDATA PRO EVOLUTION), International Piping sotwares(ASME, ANSI, API etc)all Windows Operating Systems
Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries
EXPERIENCED PIPING ENGINEER WITH PDS ADVANCED EXPERTISE / TECHNICAL DATA SPECIALIST
Engineer /PGDBM 17 Years Experience in SCADA, PLC, Automation in INDIA, France, Gulf, Middle East
I am a graduate Mechanical Engineer having16 years Design experience with oil refineries and reputed Engineering consultancies. I am well experienced in all piping design activities including stress analysis.
Experienced hydrogeologist and groundwater modeler with PHD from USA and work experience in USA, Europe, and the Middle East
Precommissioning, commissioning, operation process engineer
Quality assurance engineer
4 Years Oil Field Experience; Bachelor of Mechanical Engineering Degree
Controls & Instrumentation Engineer/Sr. technician with experience in GE gas turbine controls - (MK II, MK IV, MK V & MK VI), boiler & steam turbine control and protection, DCS, PLCs and instrumentation. I have a total of 15 years experience in the field of controls & instrumentation.
Mechanical Design CATIA v4 v5
I am a graduate Mechanical Engineer, experienced in Power and Oil & Gas sector in Operation, Maintenance and Design side.
I am a Petroleum Engineer from Indonesia, currently working for Vico Indonesia in Jakarta.
Well cementing specialist with experience in the field of well cementing, ability to work internationaly, great knowlege in location safety and job quality
I/E Designer, 25 years experience in the petrochemical industry along the Gulf Coast. Worked onsite at client facilities and in-house. Extensive use of Autocad and MS Office (Word, Excel). Experienced in working with other engineering disciplines, clients, vendors and construction. Willing to travel
Working as Maintenance Planner in AbuDhabi National Oil Company - TAKREER on Contrct hire. well versed in MAXIMOi, Primavera & MS Project- Planning System.
• Over 5 years of proven experience in installation, maintenance, reparations, projects and operations in petrochemical/refining industry • Identify, investigate, correct and document potential operation, maintenance and safety problems
Pursue a challenging career as an Industrial / Quality / Mechanical engineer in a reputable organization. I consider myself a good team player and result-oriented who likes to face challenges. MS Industrial Engg. with major in Quality Engg. B.E in Mechanical Engineering
Sr. Petrophysicist / Geologist, 13 year international experience.
EXPERIENCE IN ANALYSIS OF OIL AND GAS,PETROCHEMICALS,FERTILIZERS USING ASTM,APHA AND IP METHODS. HANDLED RELATED INSTRUMENTS LIKE GC,AAS,COLORIMETER,PH METER. COMPANY: SOUTHERN PETROCHEMICAL INDUSTRIES CORPORATION LIMITED.INDIA.
Worked as an Auto Cad Draftsman & Secretary In Saudi Arabia 5 Years and still continuing.
As an engineer, my unique wish is to work within a highly institutionalized firm so as to improve my abilities and prove the educational background I have. Off these purposes, having about three years of experience at financial sector will make myself, I believe, much qualified as well.
Petroleum engineer to SNP PETROM SA -National oil company-
A Mechanical engineering bachelors degree holder with twelve years experience in the oil industry with three years Refinery operations experience at the Mombasa Kenya Petroleum Refineries Limited (KPRL). Six years as Terminal Operations Superintendent and three years as a Training Specialist.
Welding Inspector/Engineer IWE& CSWIP3.1 & NDT(U.T & M.T & P.T &R.T) & Authorized Welding Coordinator of DSD Ferrometalco Company
Experiense Drafter / Designer
Cad Engineer (Planning Department)
Chemist, Research Chemist, Analytical ChemistCtechnical support
11 years of experience in Erection & Installation, Engineering, Design, Commissioning, Inspection and other Management activities in the field of Terminal Automation, Gas Metering, Refinery, Gathering Centers and others.
specification of field instruments and AC800 logics to ESD /F&G
Construction Superintendent Electrical Instrument
I am diploma in mech engg,i have 5yrs exp designing field,now iam working with Proserv dubai(oil field) company as a instrumentation & mech CAD designer.Iam looking same position
Preparing of the JSA, Holding of toolbox talk meetings, managing safety inventory and reporting
Automotive, Mechanical, Catia V5 R14, Unigraphics NX 2, Hypermesh 7.0, LS Dyna 960, Ansys 8.0, Adams 2003, Fluent/Gambit
Static Equipment Design Engineer with good knowledge in the design of Static Equipments like pressure vessels etc. in accordance with ASME Sec VIII Division 1.
B.Tech. (Chemical Engg) NIT/REC India; MBA (Finance) 2~3 yrs experience in Project Management
Marine 1.Engineer Officer Certicate, 8 years experience with mechanical maintenance and as a watchkeeping engineer in the engine control room
Conversant in handling of sophisticated chemical engineering process design simulator, (HYSYS 2006;etc).
Piping using CAESAR II, AutoCAD etc & MS-Office B.Tech Mechanical
Up to (10) years experience in oil and gas industries at onshore and offshore fields for coating of steel structure, vessels, storage tanks, equipment, pipelines, offshore fixed platforms and single buoy mooring.
Planning Engineer, Certificate of degree Dr. of Philosophy
Oil/Gas Refinery Safety Supervisor/Engineer
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   [ 81 ]   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com