Resume - Instrument Engineer is seeking a challenging Position for growth and career opp...

Misco Jobs

Resume #67848

CONTACT INFORMATION:
View contact information...

Qualifications: More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems, Start up and commissioning of instrumentation & troubleshooting in the oil and Gas Industry.

Education: Electronic Engineer, Bsc Degree Electronic Engineering from Aleppo University –Syria in 1994, Faculty for Electrical Engineering, specialized in automation and control systems.

In House Management Training Courses:
1995-Supervisory skills (H.F. Consultation)
1995-Instrumentation & material selection (IHRDC).
2006-Effective Performance Management (EUROMATECH)

In House System Training Courses:
1994- Introduction to RS-3 (FISHER-ROSEMOUNT)
1995- Instrumentation & Automatic Control For Supervisor (IHRDC).
1999- Advant Station 500 and Advant Controller 450 maintenance (ABB).
1999- Advant Station AS500 configuration and operation (ABB).
1999- Advant Controller 450 configuration and operation (ABB).
2002- Electrical Equipment Inspection (Sira).
2002- M115 Basic instrumentation (Shell).
2003-Mark V Control System Operation GE Oil & Gas (Nuovo Pignone).

Overseas Training Courses:
1996- A120 Advant 500 operation, A350 Advant 500 configuration & operation (ABB Italy).
1996- Maintenance Of Gas Turbine Control Panel Mark V (Nuovo Pignone Florence Italy).
1996- Power System Management and operation (TPL, AgipPetroli Italy).
2002- Principles of instrumentation control (Tristar– Cairo, Egypt).
2002- Safe use of Electrical Equipment in Hazardous Areas (Sira- London, UK).
2002- Area Classification (Sira- London, UK).
2003 –Process control and instrumentation for instrument supervisor (Enppi – Egypt).
2004- Maintenance Planning & Engineering (Tristar– Cairo, Egypt).
2004 –ABB Advant Controller 450 DCS operation and configuration (ABB University Sweden).
2004 –ABB Advant Station 500 DCS operation and configuration (ABB University Sweden).
2005 –Ten Essential Skills For Successful Management (INTEC. Cairo Egypt).
2006- Advant PLC,RTU,DCS &SCADA system (INTEC. Cairo Egypt).
2006- Regional Electrical Engineering Meeting(SAPREF. South Africa).
2006- Contracting & Contract Auditing (INTEX. Cairo Egypt).

Safety Training: by AFPC Safety Training Department at Omar Training Centre.
1. Induction to environment protection in AFPC.
2. Induction to first aid.
3. NORM" for supervisors.
4. Permit to work system.
5. Basic of fire fighting.
6. Hydrogen Sulphide (H2S) &Breathing Apparatus.
7. HSE induction in AFPC.

Experiences:
2003- Present Al Furat Petroleum Company(AFPC),Omar Power Plant Instrument section head.

* Instrument Team leader for Installing, commissioning and testing of Frame 6 gas turbines instrumentations, Mark V turbine control sys. & Aux Monitoring sys.
* Check if the designs are in accordance with the contract, and all the design documentation are available and in accordance with the contract.
* Documentation up dating for various modification in the plant, Instrument loops and P& ID's
* Stock proposal for maintenance consumables and spare parts.
* Responsible for control systems availability & reliability.
* Involved in many ESD test, then generated ESD Test Close Out Report.
* Keep track of Instrumentation standards and co-ordinate updates with engineering department.
* follow day by day the maintenance Planning for Instrument department.
* staff development.

2000-2003 Al Furat Petroleum Company(AFPC),Omar Power Plant Instrument Supervisor.

* Responsible for the routine (preventive) maintenance activities for all Instrument equipments in the power plant according to maintenance schedules.
* Responsible for the corrective maintenance and breakdown jobs whenever any breakdown happens and reported by operational staff through a work order generated by the planer.
* Responsible of Preventive and break down maintenance of Frame 6 Gas Turbines, ABB DCS and trouble shouting.
* Close the work orders for the completed jobs and fill the feedback and history in the work order with all the observations and notes.
* Instrument Staff on job Training.

1994- 2000 Al Furat Petroleum Company(AFPC),Omar Power Plant & Gas Plant Instrument Senior technician.

* Repairs, calibration and maintenance of all kinds of process measurement and control Instrumentations used in gas process and GE frame 6 gas turbines.
* Worked on Instrument Air compressor packages, control panels for duty/ standby control and loading controls.
* Worked on Instrument Air Dryers with automatic duty selection and regeneration programmed sequence controlled by PLC & DCS.
* Worked on Automatic fire alarm and extinguishing system using CO2 gases and water deluge sys.
* Worked on fire detection systems with fusible plugs.
* Worked on Bently Nevada Vibration monitoring systems.
* Worked on velocity pick-up vibration system. (SEISMIC).
* Worked on fire& gas detection system in GE gas turbines.

Personal Information:
Date of Birth: 1970
Nationality: Syrian
Marital Status: Single.
Driving License: Valid Syrian License&AFPC Driving License.

References:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6545)

Go to Search Parameters...

Brief Description

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out