Resume - Dedicated professional with 18+ years of experience in • Installation & service ...

Misco Jobs

Resume #67907

CONTACT INFORMATION:
View contact information...

Experience Summary

Dedicated professional with 18+ years of experience - willing to travel and relocate. Result-oriented individual with a proven track record of accomplishments and consistent contributions that increase efficiency and control costs thru expertise in the following

* Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs
* Fault Diagnosis, calibration of equipment, servicing and maintenance of ESP
* Ease with use of y-tool, Twin packer, Coil tubing method.
* Testing,
* Prepare internal reports from any site work observations
* Quality control Management
* Certified H2S permit, Fire fighting certificate, underwater sea survival escape
* Travel Friendly

Proactive leader with the expertise to troubleshoot, initiate process changes and implement quality improvement process while maintaining a positive, safe and productive environment.
Career Experience

Field Service Technician Jun 2001 – Till Date
M/s Wood Group ESP Inc, Chad

Project description:

Wood Group ESP, produces world's high-efficiency electric submersible pumps include corrosion-resistant and high-temperature options that can help to increase run life in harsh environments. SPS Surface Pumping Systems provide a versatile, low-maintenance, high-pressure option for many traditional plunger, split-case and vertical turbine centrifugal pump applications, and are suitable for uses in the oil & gas and mining industries as well as in others that require high-pressure movement of fluids. Multiple manufacturing and repair facilities are located in key oil-producing regions to accelerate delivery of new products and shorten maintenance shutdowns.

This project involved installation and inspection of new ESPs for deployment in rig holes. Identification of nature of faults, assemble new equipment in wells Monitor down hole gauge readings. Opening cold work permits to prepare the tasks, report generation on Installation, Pullouts, Equipments and Accessories

* Service clients like M/s Petroleum development, M/s Anadarko Petroleum Corporation, M/s Exxon Mobil
* Use y-tool installation for new ESPs and tested for Hydrostatic pressure

* Assemble new ESP with Twin Packer
* Installation of Progressive Cavity pumps, Sucker rods, drive heads and Canopies
* Communicate tool installation and instructions with rig crew
* Continuous enforcement of job safety and security measures

Production Supervisor Nov 2000 – Jun 2001
M/s Salem al Barami Steel Industries, Muscat

Salem al Barami Steel Industries, first factory of its kind in the Sultanate of Oman, BSI manufactures welded steel fabric for reinforced concrete using state-of-art technology and machinery. The company is well equipped to service the requirements of the Construction Industry with pre-fabricated reinforcement for a whole range of applications including floor slabs, roof slabs, retaining walls and culverts. The factory is equipped with sophisticated Computer Numerical Controlled (CNC) machinery to produce steel fabric mesh in varying combinations of dimensions and sizes to suit individual needs. The acknowledged advantages are easier quality control, speed and accuracy of execution, minimizing wastage and most important, cost savings.

Project description:

* Setting and Fault finding in wire drawing machine
* Precision and production welding of plate and sheet metal
* Streamlined production using modernized manufacturing procedures
* Emphasis on the production of engineered mesh, instead of traditional reinforcement
* Identifying advantages in various structures in which reinforcement design lends to conversion

Engineer Machine Shop Sep 1998- Oct 2000
M/S Lakshmi Industries

Project description:

* Designing and Setting of TR60B Automats, Geedee Weiler capstan lathes machines, Traub Automats,
* Applying techniques to educe the productivity times by designing special tooling
* Designing Jigs and Fixtures for the different components for mass production in Gang drilling machines, surface grinding machines, and universal grinding machine
* Worked on Gang drilling, surface grinding internal grinders, special tool design for non-std components.
* Operated Milling machine and Lathes to make prototype equipment

Mechanical Maintainer Aug 1995- Aug 1998
M/S Jeddah Beverage Can Making Company LTD,
Jeddah, K.S.A

Jeddah Beverage Can Making Co. (JBCMC) is a joint venture with The Crown Cork and Seal, Inc. The two-piece can plant has the capability to print can with up to six colors including complex types. The experience of the company and the established international standards of its cans have qualified them for use by leading international soft drinks and fruit juice franchisers, and enabled JBCMC to export a considerable percentage of its production. The combined capacity of all can-making operation exceeds 4 billion aluminum cans of various sizes.

Project description:
* Maintaining Mechanical controls, trouble shooting and maintenance of can washer, can seaming machine
* Chemical adjustments of Trimmer, power presses, drier, reverse osmosis sweet Water system
* Deionizer, water purifier, effluent system, coolant filter system.
* Worked with Boiler, chemical pumps, Valves, gear boxes, vacuum turnover and adjusting of chemical strength in the washer machinery.

Shift in charge Supervisor Apr 1988- Aug 1995
M/S Premier Instruments & Controls Ltd,
Coimbatore, India

PREMIER Instruments & Controls Ltd (Pricol), a major auto component manufacturer based in Coimbatore has focused on developing products like oil pumps, electronic counters and controls, products for defense needs, industrial pressure gauges, disc brakes for two-wheelers, gears, sprockets, oil-level sensors or valves. Product quality and the company's ability to respond to change with innovative solutions have attracted over a dozen international companies as its customers.

Project description:
* Designing of Special purpose tools for all machine setting
* Setting of jobs in heavy duty lathes
* Inspection in horizontal boring machine,
* Gear cutting calculations for micron gear hobber, gear Shaper, Setting
* Job allocation in shaping, internal grinding, surface grinding
* Random Inspection of finished components

Educational qualifications
* Diploma in Mechanical engineering
* H2S permit
* Fire fighting certificate
* Under water sea survival escape certificate

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1001 to 1050 of 6520)

Go to Search Parameters...

Brief Description

I am looking for a job in the marine sector. I have worked on board Tankers, OBOs, Bulkers and Container ships. I am an ex cadet of Bangladesh Marine Academy, Ctg. I did an Advanced Diploma in Marine Engineering from Singapore Polytechnic. I also hold a Singaporean Class 1 COC.

Dedicated professional with 18+ years of experience in • Installation & service of Electrical submersible Pumps at onshore and offshore drilling rigs

11 years on instrumentation chemical and petrochemical plant, maily handle EMERSON DeltaV/Honeywell TDC3000/FF instrument

Sr. Welding / Coating / Structural / Piping Inspector with about 14 year’s Oil and Gas experience. My past experience includes Inspection/QA-QC related to Fabrication of Offshore Production Platforms, Christmas trees, Jackets ,Offshore rigs, Oil Refineries, GOSP and Gas plant piping / Structures, C

Sincere and hardworking with good communication and interpersonal skill looking for some challenging assignment

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Water well driling and development specialist.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

I have attained 17 plus years of field technical service in the Oil Refining, Petrochemical, & Refrigerations fields. I wish to utilize this experience, for advancement of my career, with a successful minded firm.

Estimation Engineer - Instrumentation.

Chemical Engineer with 11 years of experience in Project Engineering & Management in Chemical, Petrochemical, Refinery & Oil & Gas sectors.

Performing work as per international standards following operational excellence management system

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

•Experienced in sizing of process equipments •Experienced in using process simulation HYSYS, Pipeflo and Flarenet softwares• Expert in preparing process documents/drawings i.e.PFD’s and Data sheets•Familiar with ASME/ANSI codes, ASTM and API standards

I am diploma engr in mech. engg. having 18 years expr. in maint. of process plnat equipment

Experienced Chemical/Process Engineer (over 9 yrs experience). Petroleum refining, Liquefied natural gas (LNG) production and gas processing, process design, Offshore oil and gas platform deisgn (topsides), process simulations (Hysys), conceptual process design, detailed process design, Training.

12 + YEARS OF EXPERIENCE IN BOILER, BOILER AUXILIARIES - DESIGN AND DETAIL ENGINEERING

Senior Structural Engineer with 12 years experience in offshore structural engineering. Able to lead, forecast and allocate structural engineering resources and possesses conceptual to detailed design experiences in brown and green field projects.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Bachelor Engineering Degree, BSC Geology, 10 years oilfield experience, Mud Engineer, Data Engineer, Geologist and Reservoir Engineer

Welding Technologies, Technical assistance, Workshop, site, AutoCAD, Tekla Structures, XSteel, SolidWorks, MS Project

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

Drilling/Energy Professional, functional/technical business experience on IT, project management, operations, sales, supplier summit, strategic development. Oracle Certified Professional (OCP) DBA and EIT Texas. Strengths - drilling, workover, Petroleum engineering, IT implementation, Oracle

Himanshu Parikh have done B.E in power Electronics in 1997 and started professional career in Industrial control system. During these 10 years I have worked for automation products of Yokogawa, Invensys (Foxboro), Rockwell & ABB and inverters of Reliance Electric & Vacon.

SCADA and RTU for Electricity and Water

automobile engineer

Become an expert in the field of Computer & Information Technology and hold a high position with broad decision-making authority

I am a Diploma holder in Mechanical Engineering; I am looking for a Mechanical Draftsman job

I am a Petrophysicist with 8 years experience

Ph.D (Chemical Engineering), from Indian Institute of Technology Delhi, India.

Certify Valve Maintenance Personnel, Mechanical engineer/Instrumentation Certified/Project Managment Certified .

reservoir engineer

Twelve years of progressive petroleum engineering experience. The past five years I worked as a Completion/Operations Engineer.

Proficient with EPC contracts focus on Oil & Gas, Petrochemical Projects.

Inspection Technician Mechanical in FFBL Fauji Fertilizer Bin Qasim Ltd. (Formerly FJFC) Karachi Pakistan

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 [ 21 ] 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out