Resume - Worked with electrical substation, transformers, circuit breaker, relays and oth...

Misco Jobs

Resume #68003

CONTACT INFORMATION:
View contact information...

Objective: Position as an Electrical Engineer
Summary of skills:
* 15 Years experience in Low, Medium, High and Extra voltage Substation Designing, maintenance, Operation and trouble-shooting of all types of Circuit Breaker, Transformers, Relays (Conventional and Microprocessor Based), and Battery Chargers.
* Worked in installation and co-ordination of different types of protective relaying and remote control system.
* Supervised the substation maintenance work done by the contractor group of 30 considering the network stability as well as human safety.
* Thorough knowledge of MS Word and Excel, also in depth understanding of the application of Special Software used for the testing, relay setting, trouble shooting of varieties "Digital Terminals".
Employment Experience:
Production Team Member
Modatek Systems, Milton, ON from Nov/03 to till date
* Worked as an assembler in the automated auto frame manufacturing plant with robotic welding environment.
Electrical Panel Builder
Olympia Control, Rexdale. ON from Apr./03-Jan/04
* Worked as wiring technician using the schematic diagram to build control and operational panels for Robots, street light and other electrical applications
* Performed services for the customer in their premises
* Performed modification and trouble shooting of the supplied equipment in the customer plant
Electrical Engineer
Ministry of Electricity & Water, Subahan, Kuwait 1992 to 2001
* Checked and modified substation design as per substation standard and requirement from the maintenance and trouble shooting point of view; reported to design department for modification
* Worked as maintenance in-charge of High and Extra High voltage substation with Gas Insulated system of voltage level of 300KV of various manufacturers as Siemens, Hitachi, Alstom, ABB, Mitshubishi and Transelectro.
* Maintained and recorded the test result of all the conventional, electronics and digital relays used in substation.
* Commissioned fully and partly damaged sub-station in different areas in Kuwait

-2- prodip sarker
______________________________________________________________
* Supervised the maintenance work of the contractors and sub-contractors, taking adequate safety for the people as well as network stability.
* Maintained and analyzed the fault recorder used in the 300kv and 132kv underground and overhead transmission lines.
* Introduced proper maintenance technique, which reduced the manufacturing rate of substation equipment by 10% from the previous six months record.
Sub-divisional Engineer
Bangladesh Power Development Board, Chittagong, B.D 1986 to 1992
* Worked in the Grid Maintenance Division containing 8 no 132/33/11Kv substation as Operation and Maintenance in-charge.
* Re-commissioned a fully flooded high voltage substation with required repair and modification.
* Performed all type of maintenance and troubleshooting for the entire substation in this division and recorded the results in the history book of the equipments.
* Developed and implemented operation, maintenance and trouble shooting procedure, resulting in the reduction of power interruption rate from 15% to 10% in one year.
Expert service:
* Tested and energized a 132/33/11kv Substation Halishahar under BPDB Chittagong, Bangladesh after flood affected in 1991.
* Commissioned and energized of 45Mva 132/33 KV Transformer at Noapara Substation under BPDB Khulna, Bangladesh.
* Commissioned and energized 20Mva 132/33 KV Transformer at Jheenaidah Substation under BPDB Khulna, Bangladesh.
* Re-energized the 132/33/11kv remote controlled Gas Insulated Substations at Kuwait affected after the war between Kuwait and Iraq in 1992.
Education and training:
* Assessed as equivalent to Bachelor of Science in Electrical
Engineering by C.E.S of University of Toronto. 2000
* Completed Quality Assurance Certificate Course from Seneca College
* Completed a Motor and Servomotor control and PLC Courses from George Brown College 2006
* Completed 442A licensing program from Ministry of Education and Tanning
* Attended training courses arranged by ABB, Siemens in Microprocessor based equipments for protection and control.
Associations:
Member, The institution of Engineers, Dhaka, Bangladesh. 1985
Member, The Kuwait Society of Engineers, Benid-Al-Gar, Kuwait. 1992
Associate Member of OCETT of Canada 2003
References: Provided in request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 6443)

Go to Search Parameters...

Brief Description

22 years experience and I am presently working as an Electrical Supervisor in Kuwait National Petroleum Company

15+ years experience, mechanical engineering background, AutoCAD, ProCAD, Microstation, Micro Office

Well versed at the interpretation of Piping and Instrument Diagrams, Signal Flow Diagrams, Rung Diagrams, Panel Drawings, Loop Sheets.

I am practical person and have occurrence procurement base.

· Dynamic sales professional with over eighteen years of experience promoting industrial equipment and service to various Process Industry

Mechanical Engineer with 11 + Years of experience in Materials and Asset Management

Currently set to graduate from University of Houston in December 2008 with a Masters Degree in Petroleum Engineering. I am a full time employee also at El Paso, working in the Reserves Mangagement group as a Sr. Production Engineering Analyst.

Professional in Upgrading and new built Rigs for Offshore and Onshore

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

Please find enclosed my resume to be considered in a position as an Electrical, instrument and control engineer (design, cost estimator, operation and / or maintenance) within your company.

I want drilling supervisor/Rig superintendent job

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Free! Commissioner Supervisor of Hydro Power Plants.

A competent and enthusiastic drilling engineer with recent experience of a High Pressure / High Temperature well. Experienced in dealing with well design, work program and budget planning, tender preparing and evaluation. Possesses good organisational, team and interpersonal skills gained in the wor

Seconded to Reservoir Characterisation Department for specific modelling projects including static Uncertainty Analysis & Field Development Asset Teams. Full Field static modelling using multiple techologies. Entire geocellular modelling workflow including lithology & depositional facies.

Contracts Engineer with 14 years experience in offshore & onshore Oil &Gas proects with very good command in English.

Candidate for Junior drilling supervisor & a14 yearsExperience Mud Eng.specialist.

Based on my educational background, I am analytical and pay attention to details. I have done experimental work both for my graduate and and post graduate studies which enables me to have a better understanding of the real world problem solving abilities while I have practical and research backgrou

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I have over 15 years hands on experience in Oil, Gas and petrochemical plants.

15 years experience in INSPECTION OF OIL AND GAS RELATED JOBS

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out