Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #68179 next resume »»
CONTACT INFORMATION:
View contact information...

COURSES ATTENDED
A/I Series Foxboro (DCS), ABB Triguard August (IPS), Daniel Flow Boss S600, instrument installations in hazardous areas and intrinsic safety systems, Petronas Instrument & Control Department development course, Petronas offshore safety training.

EXPERIENCE
August 2005 - present
Company: Petronas Carigali Sdn Bhd, Malaysia.
Location: Kuala Lumpur, Malaysia.
Position: Senior Instrument Engineer
Duties: Initially employed at the company's head office in Kuala Lumpur Malaysia, as part of an Instrument and Control team. Currently, involve in construction of HC Gas Terminal Project in Labuan Island Sabah Malaysia as a senior Instrument Engineer and also handle telecommunication works. Since joined have been involved in some project HAZOP studies, IPF studies, Project Integrated Review studies and other Petronas internal studies.

December 2004 - July 2005
Company: Kuwait Foreign Petroleum and Explorations (KUFPEX) Indonesia.
Location: Jakarta and Seram Island, Indonesia.
Position: Senior Instrument Engineer
Duties: Responsible for review Consultant design of instrument systems, construction drawings, P&ID's, MTO, etc. Later (January to July 2005) working on site as the Instrument engineer, responsible for the commissioning and migration of existing DCS to IPS and DCS as a separate system associated with Crude Oil Processing Facilities and Well sites for the KUFPEC Indonesia company.

August 2002 - December 2004
Company: ExxonMobil Indonesia.
Location: Jakarta and Aceh, Indonesia.
Position: Senior Instrument Engineer.
Duties: Instrument design work and construction supervision of projects to upgrade systems, develop new gas wells facilities, develop new water injection well facilities, upgrade and modify the gas processing facilities, on a speciality HC Gas and Condensate plans, covering a wide variety of instrumentation from pneumatic local loops to full computer control systems, telecommunication work included fibre optic cable installation.

April 1997 - July 2002
Company: Rekajasindo Bina Abadi PT (Oil and Gas Engineering Consultant).
Location: Jakarta, Indonesia.
Position: Senior Instrument design engineer.
Duties: Design work associated with the oil and gas onshore/offshore projects and also petrochemical plant projects. Preparation of specifications, instrument data sheets, control valve / pressure safety valve / orifice plate calculations, selection of materials, hook up and detail installation drawings, loop sheets, index sheets, material take off, as built drawings and vendor selection. Co-ordination between instrument, piping, electrical and process groups. Scheduling work, checking drawings and supervision of two instrument draughts men

1996 - 1997
Company: Petronusa Bumibakti PT (Oil & Gas Production Sharing Company)
Location: Jakarta and Pekanbaru, Indonesia
Position: Project Engineer and Instrument Engineer
Duties: Instrument design work and construction supervision of projects to upgrade and develop new gas wells facilities.

1993 - 1996
Company: Reka Patria Ekaguna PT (Oil and Gas Engineering Consultant)
Location: Jakarta, Indonesia
Position: Instrument Engineer
Duties: Employed initially as an instrument engineer assigned to the engineering department responsible for the preparation of drawings, specifications, control valve/pressure safety valve/ and orifice plate calculations, selection of materials, loop sheets, index sheets, material take off, vendor selection, data sheets, and as-built on a wide variety of projects including involve

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 6635)Go to Search Parameters...
Brief Description
Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job
See resume body
Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.
Maint Planning, Materials management, warehouse, plant maint, turnaround, project
Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation
Reservoir/Geoscience Technician
Completion/Workover Supervisor
I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering.
Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K
Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a
Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.
Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect
Instrumentation ICSS commissioning specialist
SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP
CONTROLS AND SOFTWARE SPECIALIST
My experience includes expert-level competencies in Mechanical Design Engineering, in Piping Materials Specification, in Pipe Stress Analysis and in Piping Items & Mechanical Package Procurement for Refineries, Off-shore Oil & Gas Platforms, Petrochemical Complexes, Chemical & Pharmaceutical Plants,
INSTRUMENT ENGINEER
Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.
I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const
I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).
Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic
Telecom Engineer transmission speciality more than 16 years experience
18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years
Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.
I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.
I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.
Experience well test engineer
OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2
With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.
Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint
17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.
Piping related job like draftsman or designer ability to work on microstation, have experience of near by 35 years as piping draftsman;
Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers
Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer
DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER
PABX SERVICE ENGINEER
Production Engineer with 12 years of industry experience
BSc in env. MSc in safety eng.
Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East
Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)
Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.
GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT
Petrophysicist, Log analyst
He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head
QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .
DCS Lead Engineer
Experienced Geophysicist
10 years in Geophysicist
First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com