Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #68291
next resume »»
CONTACT INFORMATION:
Highlights
* Task focused person who performs well both autonomously or as part of a team
* Strong analytical skills with excellent attention to detail
* Relate well to people of all cultures and at all levels of an organization
* Proven ability to manage multiple tasks within strict time frames
* Experienced handyperson who can assist with a wide variety of practical tasks
Education
Bachelor of Science in Geology University of Canterbury 2005
* Completed papers in Mineralogy, Petrology, Mining Techniques and Exploration
* Attended practical field trips in mapping and structural analysis techniques
Recent Experience
Geological Mine Geologist Newmont, Boddington Gold\Copper \Molybdem Mine Expansion Project
April 5th 2008- Present
* Drill blast pattern design
* Daily sample collection and data entry
* Over seeing geological field assistants in their daily tasks
* Training of graduate geologists
* Ore block design for maximum grade recovery
* QAQC Data entry
* RC Drill rig pattern design and project control
* RC chip logging for grade control
* Designing and implementing bench and high-wall mapping program
* Chair weekly Geological handover meeting and mine plan meeting
* Active member of Mines rescue team
Resource Development\Exploration Geologist Newmont, Boddington Gold\Copper \Molybdem Mine Expansion Project
Feb 2007- April 5th 2008
* Drill hole design and resource planning
* Extensive core logging
* Data control and entry
* Resource modeling using Minesite and Aquire
* Overseeing daily operations of drill rigs and drillers
* QA\QC
* Completed 4WD training course
Underground Production Geologist Newmont, jundee Gold mine operation
December 2005- Feb 2007
* Underground production geologist, Daily face mapping of new headings made available and drive control of all active headings
* Core logging
* Face chip data entry
* Valcan software training including proposed drill programs
* Underground driving permit
* Underground geological mapping
* Underground geological drive mapping
* Daily data/trucking figures entry (mine geology)
* Member of Jundee Mines rescue Team (ERT)
* Daily grade control data entry
* Over-seeing of daily drill operations, including extending or ending holes
Field Demonstrator University of Canterbury 2005
* Acted as Field Demonstrator for 1st year undergraduate Geology students
Sales Person PlaceMakers, Christchurch 2003-Present
* Assist and advice customers with inquires covering all aspects of construction
* Train and supervise newly hired staff in product and service techniques
* Prepare timber and product orders for pick-up within strict time frames
* Ensure a well stocked timber yard that meets all health & safety requirements
Construction Assistant Allstate Construction, California 1998-01
* Provided expert assistance with a wide range of construction and remodeling tasks
* Installed and repaired plumbing and electrical wiring fixtures
* Highly competent in framing, tiling, roofing and gib board tasks
* Experienced at project finishing and painting tasks
* Skilled at building and installing cabinets and countertops
Customer Services Representative Lumber Specialists, Christchurch 1995-98
* Assisted trade and retail customers with their lumber needs
* Prepared quotes, processed orders and wrote invoices
* Entered and checked information in accounts receivable and payable systems
* Responsible for the presentation and daily operation of the showroom
Yard Assistant Lumber Specialists, Christchurch 1991-95
* Accurately prepared orders for trade and retail customers
Interests
* Geology * Climbing * Cycling
Personal Statement
I consider myself to be an honest, reliable person. I always ensure a high standard is set and achieved in all aspects of my work. I have an excellent ability to work in both a group environment and individually, in all academic, sporting and employment walks of life. I enjoy a challenge and having responsibilities placed upon me. My employment history has required me to be hold responsibilities, which I feel I have handled admirably. I am an organized, capable, creative, competitive and vibrant individual.
«« previous resume
next resume »»
Search Results (Resumes 1 to 50 of 7011)
Go to Search Parameters...
Brief Description
Free!
Completion Supervisor for vertical and horizontal wells with 14 years experience
Free!
Experienced Geologist with all types of Petroleum Geology experience including conventional, tight sand, shale & CBM.
Free!
Geologist (Ph. D.), 10 years industry experience in exploration, mining and JORC-like reserve/resource estimation projects in Europe, Middle East and East Africa is interested to support and strengthen a new international team. Surpac experienced, hands on approach, bulk commodity experience.
Free!
Twenty two years of mining and construction experience in both surface and underground. Mine Foreman and Blaster Gassy mines. Surface and underground blaster experience. Coal and Hardrock experience.
Free!
Electrical Supervisor/Technician. Construction and Commissioning, Explosion Protection Certification
Free!
Experienced hard working Geologist, Underground and open pit experience, Resource development modelling and drill program design and implementation, Very experienced mapping and strong structural background.
Experienced Ph.D Reservoir Compositional Simulation Engineer
Project leadership, project development, engineering, installation, field startup and operations. Project engineering, instrumentation and controls, distributed control systems (DCS), safety systems (SIS),programmable controllers (PLC) Human machine interfaces (HMI). System interfaces. DCS,PLC
I Obtained a PhD, MSc and BSc all in petroleum engineering, and a wide experience (hands-on, supervision and Lab work) in drilling and drilling fluids engineering for over twenty three years. I believe in undertaking challenging for improving innovative enhancement in drilling and completion fluids.
30 plus years of international petroleum exploration in prospect generation/evaulation and in basin analysis using sieismic, geological and sequence stratigraphic tools.
cfd, thermal, aircraft, turbomachinery
I have experience in oil & gas industry for more than 22 years, 5 years in power equipment fabrication and manufacturing and 2 years in mining industry. Area of my expertise are QA/QC, Welding and NDT, Construction and Fabrication and Project Management. Familiar with International Code & Standard .
A mechanical engineer with 35 years experience in the design, troubleshooting, installation, operation, and control of rotating equipment including compressors, gas turbines, steam turbines and pumps. Primary experience has been in improving the performance of gas compressors and related systems for
A senior engineering position in areas such as Mechanical Engineering, Petroleum Engineering, Artificial Lift, Multiphase boosting & Separation, Petroleum Production Technology, Petroleum Facilities Development, Planning & Design, Pipelines Inspection & Engineering, Inspection Engineering or Corrosi
I am 56 years old Turkish citizen and looking for a serious and full time job abroad. I am an AIChE member and have PhD. , M.S. degrees related with heat transfer in chemical engineering and I also have more than 30 years of experienc
23-year profession experiences in oil and gas upstream activities with Texas Geophysicist Licenses
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
front-end engineering design (FEED), engineering, procurement & construction and test & commissioning of wireless network planning & design, backhaul microwave, satellite network and fiber optic transmission systems. Proven ability to design and implement large-scale wireless network and fiber optic
Twenty years experience in Mechanical Engineering/Design with the last ten years of continuous experience in pipe stress analysis. Pipe stress analysis, pipe supports selection&design, pressure vessel stress analysis & mechanical design, process equipment technical expertise.
Mud Engineer in Shallow and Deep Wells as Spud Mud, Polymers, Lignite and Lignosulphonate, PAC, Lime Mud, C.M.C mud, Filtrate Loss Control, Glycerin mud, Inverse mud, GOE, Inverted mud, applied in onshore/ offshore operations, HPHT well.
I have a lot of experience in drilling and drilling fluids.Desired position is Fluids Engineer onshore or Company Man onshore.
20 yrs of international reservoir engineer experience in evaluation, design, simulation, management and implement of oil and gas exploration and development projects in both E&P Companies and consulting firms
Install, commissioning and Site Acceptance Test for Substation Control and Monitoring System (SICAM SAS): PROFIBUS FMS (fiber optic cables) protocol between Bay Control Units and Substation Controller
I had a master degree in structural engineering from the University of Southern California.
30 years of process design and engineering experience with major EPC and Oil companies in Oil and Gas projects. I am Canadian citizen and a licensed professional engineer in Canada. Presently working with Jacobs Canada Inc as Process Director. Handled multibillion dollar projects.
Free!
A forward-thinking, results-oriented TOP OIL AND GAS EXPLORATIONIST with international experience for major and independent oil and gas companies on new ventures and geophysical interpretation. Contributed to ten oil and four gas discoveries in Brazil, Indonesia, Ecuador, Argentina, and Gabon.
Energetic and result-focused professional with extensive project engineering and project management experience. A unique blend of engineering and oil and gas industry skills, including SAGD and CSS operations. Able to implement innovative ideas of problem solving and meet commitments with a customer
Over twenty years experience as process engineer working with ExxonMobil¡¦s Scanfiner, Phillips¡¦s Zsorb, Crude, FCC units, Hydrotreaters, BTX, Hydrocracker, Cogen, Delayed Coker, Ethylene Cracker Sulfolane and Reformer units. Possess two technical graduate degrees.
Chief structural
Twenty five years experience as a Process Engineer in Chemical Engineering Industry. Specialized in equipment sizing, Simulation (HYSYS, VMG, Pro II, ChemCad), PFD and P&ID preparation, Optimization, Heat Integration, LDT, Pump Hydraulics, PSV and Control Valve sizing
As you will see from my resume I have spent the past 28 years working in drilling and production wells both on-shore and off-shore where I have gained considerable experience. I have strong leadership and organizational skills and a proven ability to manage and motivate a team.
I am a Reservoir Engineer with extensive hands on reservoir, field development and management experience. I have worked with sandstone and carbonate reservoirs, EOR processes, risk analysis, reservoir analysis, field development and reservoir surveillance. I have considerable simulation experience.
Mechanical/Marine engineer with extensive exprience in operation, Repair, Construction, Commissioning and Maintenance in Marine, Petrochemical, offshore oil/gas and Wind power industry.
More than 25 years in OIL & GAS Offshore and Onshore Industry.
Senior Geologist - Develoment Geologist - Advisor
Qualified, experienced both in Onshore/ Offshore and Deepwater, conversant with evaluation and testing of drilling mud. Expertiseproblem solving and report generation
Free!
BSc/MSc. 27yrs experience. Expertise: petroleum geology, sedimentology, stratigraphy, depositional modeling, 3-D reservoir architecture (RMS software). Experience: new ventures, exploration, production, acquisitions, and disposals. International exposure: 40+ geological basins in 25+ countries.
MBA and graduate Electrical Engineer with 21 years experience in Oil & Gas, Power & Plant Utilities
Seeking a challenging position to expand my capabilities and provide opportunities to grow in QA/QC and inspection fields in oil industries.
Control System Engineer
Ability for Project Managements and proactive coordination of the design, fabrication and equipment purchasing for the large offshore drilling projects
Experienced E&P reservoir engineer, results oriented performer, leading team of engineers and geologist to optimize field development and maximize asset return.
Mechanical maintenance trainer
I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems
Chemical Engineer with over 25 years of diversified experience in downstream, mid and upstream facets of petroleum industry. Adept at identifying process enhancements that have resulted in savings of millions of dollars. Industry experience spans conceptual, front end and detailed engineering design
27 years experience in reservoir engineering, from field operations to pressure testing and simulation.
A proven creative and successful oil and gas professional with many yeas of excellent experience in all aspects of oil and gas exploration and production. My experience include prospect generation , modern seismic, attribute analysis, 3-D interactive work-stations ( SMT, Land Mark etc), reservoir c
SUMMARY OF QUALIFICATIONS Acidizing and brine additives, corrosion inhibition, metallurgy, demulsification, scale inhibition, formation mineralogy, formation damage prevention, friction reduction, lubrication, excellent lab testing and engineering design skills
Degreed electrical engineer with many years of experience in instrument engineering for oil production and refining, government facilities, water and wastewater facilities and nuclear sites.
CORROSION SPECIALIST & CHEMISTRY LECTURER
First
[ 1 ]
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com