Resume - Worked during plant major Shutdown/ Turnaround held in November 2007 and carried...

Misco Jobs

Resume #68420

CONTACT INFORMATION:
View contact information...

NATIONALITY PAKISTANI
RELEGION ISLAM
DATE OF BIRTH MAY 29, 1982
MARTIAL STATUS SINGLE

Computer literate (Good command and knowledge of MS-WORD, MS-EXCEL and MS POWER POINT).

Key Achievements:
o Calibration &Maintenance of all type of instruments electronic also pneumatic at Sitara chemical industries. Faisalabad. Pakistan.
o Installed & Commissioned Foundation Field Bus Instruments and system also tank gauging system also VMS at Gulf Farabi Petrochemical Co. in Jubail, Saudi Arab o Installation of DCS system (Honeywell), ESD system (Triconex) and Bentley Nevada vibration monitoring system at Sadaf Petrochemical Plant.jabail, Saudi Arab.
o Permit issuer until valid at Sadaf Petrochemical, SAMAD, SHARQ, SAB TANK Plants.jabail, Saudi Arab.
o Pre shutdown planning.
o Circuit modification as per control requirements.
o Preparation of as built documents o Always accept challenge of work.
o Permit receiver o Driving license KSA

QUALIFICATION
ACADMIC
Diploma of Associate Engineering ( DAE) in Instrumentation Technology from Board of Technical Education Lahore S. S. C (Secondary school certificate) with science
Passed in 1998
TECHNICAL

OBJECTIVE
INSTRUMENT FOREMAN

EXPERIENCE 7 YEARS

JAL INTERNATIONAL CORPORATION KINGDOME OF SAUDI ARABIA
Working with Jal International Corporation from AUG 3, 2005 to till date during this period I worked in the following companies / plants through Jal international.
1. Al-Jubail Fertilizer company (samad)
Worked during plant major Shutdown/ Turnaround held in November 2007 and carried out maintenance and calibration of various types of field instruments.

2. Gulf Farabi Petrochemical Company AL-JUBAIL
From September 15, 2005 to June 15, 2006
Worked in the construction, installation, commissioning and start up activities of plant from instruments side and carried out pre installation calibration of different types of instruments and get chance to work on FOUNDATION FIELD BUS system, worked on Yokogawa DCS system Centum CS 3000, Bently Nevada VMS (3500) system and Tank gauging system (Saab Rosemount)

3. SAUDI IRON AND STEEL COMPANY (AL-HADEED)
Worked in the construction, installation, commissioning and start up activities of plant from instruments side and carried out pre installation calibration of different types of instruments.

4. SAUDI PETROCHEMICAL COMPANY (SADAF)
Currently working in Sadaf Petrochemical Company through JAL International
* Work involved in Installation & Commissioning of Triconex ESD System.
* Was leader of Installation and Calibration of Field Instruments including Transmitters, Control valves, solenoid valves and Local Panel Modification work.
* Supervision of Loop Checking, Logic checking & Function Test on Honey Well DCS TDC series 3000, Safety Shutdown System Triconex TMR, Modicon PLC and Bentley Nevada VMS system (3500, 3300 series).
* Rectification/Troubleshooting of field Instruments, Relay panels, Control System and other areas as per requirement.
* Preparation of as built documentation.
Control System worked on:
* Honey well make DCS TDC series 3000 (USA)
* ESD System Triconex TMR (USA), PLC Modicon (USA)
Field Instruments worked on:
Transmitters as Pressure, Level, Flow and Differential (Smart series), Displacer type Level Transmitters (Fisher), Control valves, On/Off valves, I/P & P/I converters, CMC switches, Announciators, Solenoid valves and various types of other Instruments.

Descon Engineering Ltd. Abu Dhabi. January 2005 to February 2005.
o Function: Instrument Technician

Annual Turn Around 2005

Customer: Borough Plant

Location: Ruwais, Abu- Dhabi

Sitara Chemical Industries Ltd. Faisalabad, October 2001 to January 2005.
o Function: Instrument & Control Technician (Maintenance)

Location: Faisalabad, Pakistan

JOB DESCRIPTION
ƒ¤ Independent handling of shift duty as instrument and analyzer maintenance technician.
ƒ¤ Maintenance and troubleshooting of HART & SMART protocol transmitters of ROSEMOUNT, FOXBORO, HONEYWELL,YAMATAKE and YOKOGAWA
ƒ¤ Overhauling, servicing of all types of control valves, on /off valves, angle valves of MASONIELAN, XOMOX, HONEYWELL, YOKOGAWA & FISHER CO.
ƒ¤ Maintenance and calibration of mass flow meters, magnetic flow meters, ultrasonic flow meters and vortex flow meters.
ƒ¤ Equipment handled such as, HART ROSEMOUNT, SFC HONEYWELL& YAMATAKE, TRANSCAT LAB, TRANSMATION, PANAMETERICS, ASHCROFT, AMTEK, FLUKE and other field calibrator.
ƒ¤ Control Systems,
* Honeywell Plant Scape 400.
* SIEMENS PLC Siemetic Series S5-100U, S7-300, Mitsubishi Melse Series PLC

ICI Polyester Fiber Plant, Sheikhupura. July 2001 to October 2001
o Function: Trainee Instrument Technician

Responsibility:
* Carry out Maintenance of Instruments.
* Calibration, Preventive maintenance, breakdown maintenance & shutdown maintenance jobs.
* To maintain Instrument Work shop.
* To identify required spares and consumables.
Carrier profile
ƒ¤ During my above tenure you can justify my proficiency in the areas of world-class industry. Also commanding knowledge of routine maintenance, startup, and shutdown, normal and emergency hours.
ƒ¤ I am person whom you can relay for above-mentioned activities as well many more. I am sure and I will be at the full satisfaction to your department.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 6742)

Go to Search Parameters...

Brief Description

Over 17 Years of professional experience in Piping, Basic & Detail engineering of Offshore(FPSO, FPU & Wellheads), Onshore Refineries, Petrochemical plants, Oil field developments, Fertilizers, Chamical, Process and industrial plants of various types with excellent knowledge in Industry standards

Working as Sr. Electrical Engineer (Project Co-ordination) in SEG Middle East LLC. Abudhabi, UAE, at Aug.2006 onwards.

Operation, Maintenance, and troubleshooting of Reciprocating, Flotronic, Screw & Scroll Chillers.

Awarded degree with M.Sc. in Polymer Chemistry with basic degree in Chemistry background, aspiring for a suitable position which offers professional contribution and self development with my area of interest in Research and Development and Quality Control department.

Design, maintenance of process Instrumentation

Expert to work with ORCAFLEX ,ORCALAY,OFFPIPE,AGA Software - Able to work with CAESAR II,SAGE Profile,MOSES,AUTOPIPE,MATHCAD - Worked with DNV 1981,DNV 1996,DNV 1998 (Guideline No. 14),DNV 2000 (OS F101),DNV RP B401,DNV PR F103,DNV RP E305,DNV RP F105,DNV RP F107,BS 8010, BS 7910, API 5L, ASME B31.8

I worked for construction of grid sub stations, designing of house wiring, panels designing etc

Dedicated, reliable professional with over 14 years of experience in all aspects of oil / Gas HSSE Offshore and Onshore.• High ability to deal with multicultural environments in position where communication is important and teamwork is essential.•

Judicious leader with 11 years’ experience in the areas of Production Planning, Maintenance Operations, Quality Inspection and 10 years in Hydraulics.

Mud Engineer (senior) experienced motivated ready to relocate works anywhere

Seeking challenging job in power/Gas/Oil and desalination plant to utilize more than 23 years of experience as senior commissioning engineer, operation engineer, shift operations superintendent, and equipment conditioning & performance engineer of Rotating and Static equipment of thermal power plant

Extensive experience in managing complex construction and service projects with the knowledge to balance the requirements for functionality, quality, timeliness, and safety.

Over 25 years of international oil/gas industry experience as a professional Geologist, I worked on Africa, Middle East, Canada, UK, India, Kazakhstan, Trinidad & others. Proven track record in geological exploration venues: prospect generation & new ventures evaluation

Geoscientist, Senior reservoir modeller. Geostatistician. Scientific software developer

University of Oil and Gas – Ploiesti, Engineer 2003;- BOSIET OPITO & H2S Induction - Survival Course in Malta at International Safety Training Center- with degree and personal safety logbook valid until Nov. 2008, Specialized certification course in “Programming annalist” – Windows, dBase, Fox

Checker/Sr. Piping Designer having a very good exposure in Piping layouts for Oil and Gas , Refineries and petrochemical plants, checking of Isometrics, MTO, Piping layouts, good working experience in PDS Desinn review.

* Membership in ASET and with work experience in instrumentation and control systems field. * Familiar with field instrumentation and industrial control system. * Experience in multiple loop control systems, PLC, DCS, SCADA systems * Fluent in computer and AutoCAD drawing skills.

A professionally qualified and technically competent Data Management Analyst, with 14 years experience in Well log Data Processing and Petrophysical Data Management.

To receive a laboratory, Technical, Analysis or Research position working in the Petroleum and/or Oil Field.

I am having Bachelor Degree of Mechanical Engineering certificate. I have 7 years experience in Qa/Qc field and 10 years experience in production field. And also I have completed the AWS-CWI,NDE Level II.

Piping design, pipe supports, project coordination. 25 years experience in petrochem industry. Autocad, word, excel, office. Motivated and available.

Over 25 years of experience in the oil and gas industry in: Quality Control and Inspection of Materials, Weld Inspection, Blasting and Coating .Management of personnel and administrative staff. Certification and condition assessment activities of both new and in-service equipment.

HSE specialist with chemical/process engineering background seeking environmental or HSE role within the oil/ gas and construction industries.

Please find below my details of experience for Estimation Engineer Position. I am a diploma mechanical engineer and keen in excelling in my career with hard work and accepting higher responsibilities.

Senior Pipelines Engineer with 16 years experience with International Consultancies.

vibration foreman

Experience in reservoir engineering and other petroleum related activities. Experience in reservoir performance / simulation, secondary recovery methods, and field developments, Production Forecast and in place volume estimation.

Electrical and Instrumentation Engineer having 9 years of experience in construction, Maintenance, Projects, oil, Industries.

Nebosh Qualified HSE Professional

Analyzer commissioning and maintenance in oil and gas industries

I have experience on Project & system engineering with testing and commissioning. I have visited various places in India & aboard for commissioning of the systems. I have undergone 3 Months on Job training at Invensys India Pvt Ltd., Chennai for Foxboro DCS. I was affiliated with Yokogawa India

OIL AND GAS, PETROLEUM RELATED EPC PROJECTS - ESTIMATION AND PLANNING USING P3 AND MS-PROJECT SOFTWARES

A 10 years experience Control & Automation engineer serving the oil and gas industries with skillful experience in metering, instrumentations and control & automation system. Solid experiences and confidence in Site Erection and Commissioning, Design and Project Execution.

Worked during plant major Shutdown/ Turnaround held in November 2007 and carried out maintenance and calibration of various types of field instruments

Engineering Manager - Petrochemical

15 yrs exps. mechanical maint.

Horizontal directional drilling

Determining the direction of the organization by establishing objectives and by designing and implementing the strategies necessary to achieve those objectives or identifying and analyzing the things that may help or hiders accomplishment of objectives.

Engineering, Design, Installation, Commissioning, Programming, Management, Consultancy & Upgrades etc., for all types of Instrumentation & Communication Projects for Oil & gas Industry, Paints, Refinery, Petrochemical and Glass. Preparation of Design Basis Scoping, Functional Specifications Document

Procurement Engineer with 14year Exp. in Oil/Gas/Engineering Industry, Qualification Diploma in Fabriction Engineering

Oil & Gas Production Chemistry, Chemical Engineering, Corrosion Engineer, Process Optimisation, Production Chemicals Optimisation, Corrosion/Scale Prevention/Inspection, Process and Environment Monitoring, Well testing/completion design, Process design/waste water management, Extensive field experie

I am an innovative thinker with a demonstrated ability to improve production and decrease down time. I am very adaptable to changing projects and work schedules and have a proven ability to quickly train on different facilities. I have excellent planning and organizational skills

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Well services(welltest, slickline, etc.) & routine production operations supervisor

Responsible for the operation of highly sophisticated Instruments like GC, HPLC, ICP, AAS, UV-Visible Etc., and communicating the results to other departments in time.

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Over 14+ Years of Accomplished experience in automation

Workover / completion supervisor and materials mamagement

Eleven years experience in sheet metal fabrication

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out