Resume - Instrument Engineer

Misco Jobs

Resume #68457

CONTACT INFORMATION:
View contact information...

- OBJECTIVE
I bear a strong Academic and Professional background in the field of Electrical & Electronics Engineering with abilities to adapt and grow according to market demands. I seek to gain valuable real-world experience through a full time position in a reputed organization leading to a career involving DCS & PLC using the latest technologies.

I have worked both as an employee and as individually on large and small projects utilizing my professional skills. This Resume' should provide an overview of the Academic and Professional status I hold.

- PERSONAL INFORMATION
-- Date of Birth: 19th November 1981
-- Religion: Islam
-- Nationality: Pakistani
-- Languages: English, Urdu & Pushto

- EDUCATION
-- BE Electrical & Electronics Engineering
--- NWFP UET Peshawar 83% (Aggregate) A1 2000-2004
-- F. Sc. (Pre- Engineering)
--- Federal Board of Intermediate and Secondary Education 76% A 1997-1999
-- Matriculation
--- Federal Board of Intermediate and Secondary Education 83% A1 1997

- PROFESSIONAL EXPERIENCE
-- Fauji Fertilizer Company Ltd. Mirpur Mathelo & Ghot Machi, Pakistan (2005–To date)
Affiliated to the company as Instrument and Control Engineer, my work experience includes:

--- YOKOGAWA DCS CS3000 PROJECT
Successfully completed engineering & online commissioning of YOKOGAWA DCS CS3000 at Fauji Fertilizer Company Ltd. Mirpur Mathelo in TA-2007. Primary job responsibilities during project includes plant information collection & verification, critical control loop finalization for implementation, hardware selection, network layout, software configuration, hardware installation, sub-system communication with DCS, installation of new consoles for DCS/ESD HMIs, power supply distribution & system load calculation. Successfully planned & managed DCS power up & SAT. Developed control transfer plan & procedures for safe control transfer. Successfully executed online transfer of plant control from conventional control system (Taylor) to DCS and removal of old control system consoles from control room & cabinets from rack room.

--- MAINTENANCE OF MACHINE MONITORING SYSTEMS & SPEED GOVERNORS
Currently maintaining Bently Nevada Machine Monitoring systems 3500/3300 systems. Worked on engineering of Woodward 505E Governer (Electronic Steam Turbine Speed Governor) at FFC-GM Plant-II.

--- PLCs
Hands-on training and the maintenance experience of plant's ESD system based on Honneywell FSC & HIMA PLC and instrument air dryer automation using Allen Bradley & Siemens Simatic S5 PLCs

--- WEIGH MACHINES REHABILIATION & COMMISSIONING PROJECT
Engineering & complete rehabilitation of Urea Weigh Machines and commissioning of new Urea Weighing & Bagging Machine at Fauji Fertilizer Company Ltd. Urea Bagging Plant.

--- HONEYWELL TDC 3000 & YOKOGAWA DCS CS 3000 TRAINING
Hands-on training on TDC 3000 & CS 3000 that included RIO-NET/LCN configuration, V-NET/UCN configuration, Process Point Building, Graphic Building, Button Configuration, trend configuration, calculation block building, report package development and etc. Formed different Real-Time process control simulations during training on the training set-up. Also got an intense maintenance experience of DCS.

--- BURNER MANAGEMENT SYSTEM
Studied BMS of waste heat & auxiliary boilers and prepared technical proposal & justification for replacement of BMS auxiliary boiler (B-4601) at Fauji Fertilizer Company Goth Machhi.

--- CONTROL VALVES AND PSVs
On the job calibration and maintenance experience of different control valves and PSVs.

--- Assigned responsibilities of DUTY OFFICER for establishment of FCC (Front Control Center) & RCC (Rear Control Center) during emergencies.

--- Completed APCT Project for certification for SMART Program during normal operations of the plant.

--- Successfully planned & executed three Turn Arounds at FFC-MM & FFC-GM

--- Successfully implemented Urea Prill Bucket Control on the DCS

--- Successfully established sub-system communication i.e. between YOKOGAWA DCS CS 3000 & Bently Nevada using MODBUS

--- Successfully implemented communication in between DCS CS3000 & Matlab using OPC.

--- Successfully rehabilitated the Urea Weighscale Machine for plant production reporting & prepared it calibration & maintenance procedures

--- Prepared and implemented preventive maintenance plan for field instruments & control room instruments

--- Involved in commissioning, maintenance of numerous field instruments & control room instruments

- UNIVERSITY PROJECTS
-- ADAPTIVE NOISE CANCELLATION USING NEURAL NETWORKS
The main purpose of this project was to design a system that removes noise from the communication systems by using neural networks. The project was divided into two parts: 1st the selection and designing of the network and 2nd the simulation of network. MATLAB was used for designing as well as for simulation of the network.
-- DEVELOPMENT OF PC BASED SPECTRUM ANALYZER
-- SOFTWARE FOR DESIGN OF ANALOG FILTERS IN MATLAB

-COMPUTER SKILLS
-- ENGINEERING SOFTWARES
--- Matlab (Currently using it for analysis, design and simulation of systems)
--- Automation studio (Using it for simulation of pneumatic & hydraulic systems)
--- Maple
--- Orcad
--- Circuit maker
-- APPLICATION SOFTWARES
--- MS Office
--- MS Visio
-- COMPUTER PROGRAMMING
--- VISUAL BASIC
--- C/C++
-- OPERATING SYSTEMS
--- MS Windows All Version
--- Redhat Linux 7.2
--- MS DOS

- MANAGEMENT/TECHNICAL COURSES
-- EFFECTIVE COMMUNICATION SKILLS (2007)
One week course from Pakistan Institute of Management Sciences, Lahore
-- TEAM WORK (2007)
Three day course from Technical Training Center, FFC-GM
-- EFFECTIVE PRESENTATION SKILLS (2005)
Three day course from Technical Training Center, FFC-GM
-- BENTLY NEVADA 3500 (2005)
Assisted a course on Machine Monitoring using Bently Nevada 7200/3300/3500 systems in Technical Training Center FFC-GM

- HOBBIES & EXTRA CURRICULAR ACTIVITIES
-- Computer programming, troubleshooting, installation and exploring new technologies, reading Technical Book etc.
-- I was member of Computer Society, Dramatic Society & Social Welfare & Blood Organization (SWBO) Society in NWFP UET PESHAWAR from 2002 to 2004
-- Actively participated in fund raising at Fun Fair and in house sports events in 2005/6/7 at FFC

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4951 to 5000 of 6443)

Go to Search Parameters...

Brief Description

graduated in mechanical engineering, Proficient in Autocad, Trained on HVAC systems of Indian Institute of management, Worked as maintanence engineer in The Western India Plywoods, India, Worked as a software engineeer in Cognizant technology solutions,

on/offshore seismic data acquisition.Field seismic QC.Seismic recording: SN 388.DESIGN 3D Layout.and NAVIPAC as navigator.Deployment/recovery of seismic devices.Trouble shooting and attend to work shop.

Project Manager / Finance Management

Instrumentation Technician/Trainer/QA/QC

Masters in Mechanical Engineering , with CAD/CAM and FEA courseowrk , Done Maintenance Engineer job in Textie indutsry , Undergarduate Internship in Desiging and Graduate Internship in Desiging and Analysis , Handled 3D softwares like CATIA , Pro-E and 2D software like Autocad

Carry out skilled maintenance work independently in the repair, overhaul, troubleshooting, alignment and modification of mechanical, rotating and stationary equipment like pumps, steam and gas turbines, compressors, fans, gearboxes, valves, PSV’s, heat exchangers, vessels, columns, boilers, filter

Extensive experience in hardware and software testing. Executed regression tests. Logged defects and participated in defect prioritization and verified fixes.

My skills are quality improvement, planning, and reporting to ensure that the service provided is what the client need. I have over two years experience working with oil and gas data. I have the ability to find data management solutions. I'm seeking a career opportunity for a growing company.

geophysicist

Senior Professional Geologist

Executive engineer & managment projcet

I am very confident with my experience and ability that I can offer to work with your company, especially in calibration, repairing and testing of the many kinds of Instrumentation such as transmitters, control valves, switches and general instrumentation.

Tendering & Estimation, Proposals Preparation, Contracts Engineer

Project and Commissioning Engr/Manager I&C

Petroleum Engineer looking for Fields operations

Fourteen years of consistent and solid work experience in the field of Instrumentation, out of which the past ten years are in the Middle East. Certified in Instrumentation Mechanism by the Government I.T.I. from T.R. Pattinam, Karaikkal, Pondicherry, India during the year 1990-92.

Specialized in designing using Pro-Engineer in Automobile industry, consumer and power transmission industries.

Maritime chief engineer with more than 20 years on bord sea-going ships and 7 years as HVAC Technician and Electrician for shore-based companies,searching now a shore based job in accordance with education and experience.

Research Experience: Polymer solutions and adsorption behavior.

Mechanical Engineer

To be a part of heighly esteemed organisation where working will be a chellange to my skills.

I have just attained a Diploma in Petroleum Engineering Technology and is presently pursing my B.Eng degree in Petroleum Engineering. I have also learned and applied Project Management to a variety of projects. Also, I have 6 months of both land and offshore experience in the Oil and Gas Industry.

Refractory field engineer, 40 years global experience in refractory/furnace construction in a variety of industries inc. aluminium, copper, iron&steel, cement, glass, petrochem, & industrial waste

Looking for Instrumentation and controls job

I am a Quality Health and Safety Management Consultant with more than 16 years experience in Middle East . I am a Lead Auditor for ISO9001:2000; ISO14001:2004 and OHSAS18001:2007. Apart from this I am NEBOSH-UK Certified HSE Advisor . Has rich exerience in evaluating Management systems

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Highly Skilled Civil Engineer

Having more then Six years of experience in operating and controlling trouble shooting of high-pressure Oil and Gas plants .

Training/HR Professional, Accredited Vocational Assessor with experience in the areas of Performance Consultancy, Personnel Development, Recruitment, Competence Based (NVQ) Training Systems and Certification, Training Needs Analysis and Evaluation within Oil/Gas, Nuclear, Defense and Railway Industr

manager/worhop/service/electrical

Instrument Engineer

Senior management professional with extensive experience in Management & Operations of IT & Telecom Networked Infrastructure and Systems, Managed Services, Information Security, Process Modeling, SAP Implementation, Consultancy etc across industry segments.

Division Order Analyst, Lease Analyst, Land Analyst

Twenty years experience in global recruitment of oil & gas people: including manpower planning for companies such as AkerKvaerner, ConocoPhillips, Exxon, KBR, Fluor, Shell, Technip and Woodside for oil & gas projects in Australia, Brunei, Indonesia, Malaysia, Singapore and Korea.

MWD/LWD Field Service Engineer (4 yrs), Drill Bits Evaluation & Sales Engineer (2 yrs)

I have been working as an Instrument Technician for 4 years in an Oil/Gas company.

Mud Engineer looking for work.

HSE/Safety construction professional in the oil and gas sector-15+ years experience with major clients on construction of LNG, pipelines, GPP, marine, jetties, tanks, buildings, fabrication shops, shipyards.

More than 10 years of post graduate experience in project, safety, inspection, designing engineering & management in the oil & gas industries. Skilled in offshore, onshore & land engineerin. Proficient in excel, MS word, Premavere, introduction to AutoCAD. B.Eng in mechanical engineering.

I am working as welding inspector in oceanreeng ois project Ras Gas. And befor date of 28 april 2007 working with EIL project Burj Dubai Development & GRAVITY BASE STRUCTER IN DUBAI DRY DOCKS.

testing, commissioning, construction and maintenance

Hard working, Project Planning and Leadership ability, communication and Analitycal skill, problem solving and interpretation skill, strong negotiation ability Person

BGAS Certified Painting Inspector Grade -2 & Civil Eng. Diploma Holder working as Painting/Civil Inspector, with more than 18 years Exp. in the Engineering/ Construction Oil & Gas field & Industrial construction. My principle activities are Quality Controlling 'Inspection monitoring & Supervision

Amos RAST Database builder, PMS Engineer, Marine Engineer Liscensed, Support, Maintenance, Planning

Word packaging

HVAC as per ASHRAE,knowledge in PIPING

10 years experience in oil and gas projects including contract review during bid stage, negotiate terms and conditions of Contract, prepare, negotiate and finalize of sub-contract terms and conditions, contractual correspondence, preparation of change orders, preparation of delay, contract claims

Internship/Work Experience Chemical Process Engineering

Petroleum Engineer, 4 years industry experience in Logging, reservoir and drilling fluids.

Programming VB6, ASP,COBOL,Oracle,MS SQL server,MS Access, Lotus Notes R5,

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 [ 100 ] Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out