Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #68661
next resume »»
CONTACT INFORMATION:
View contact information...
Date of Birth: 25th of June, 1979
Nationality: Jordanian
Social Status: Single
Education:
BSc in Mechanical Engineering From Jordan University.
Year Of Graduation: February, 2002
Grade: Very Good
Master Degree in Mechanical Engineering From Jordan University
Year Of Graduation: February, 2005
Grade: Excellent
- Master Degree in Mechanical Engineering, with GPA (3.63 out of 4.00), rank 1 out of 25 students. University Of Jordan, Amman, Jordan. Thesis subject is "Dynamic Modeling And Control Of Cantilever beam mounted on a moving Cart And Carrying Tip Mass ".
- BSc in Mechanical Engineering, GPA (3.16 out of 4.00), rank 3 out of 50 students. University Of Jordan, Amman, Jordan. 2002.
- General Secondary Certificate, 92.8 out of 100, 1996-1997. Orouba Secondary School,
Amman, Jordan.
Graduation Projects:
1. Master Degree Thesis
"Dynamic Modeling And Control Of Cantilever beam mounted on a moving Cart And
Carrying Tip Mass ".
The uniqueness of this research that it combines modeling of nonlinear vibration and using Optimum controller to reduce vibration, which is considered as main of important fields in Mechanical Engineering researches.
2. BSc Degree Project
"Year-Round Performance Of An Improved Solar still"
This research was found to study the performance of solar still during the year in Jordan, so tilt angles and suitable flow rates were determined to increase the efficiency of the solar still This Project has been ranked as one of the best graduation projects in Jordan and get homage certificate from Jordanian Engineers Counsel.
Experience:
(10th Feb. 2006 - up to Now) Lecturer and Researcher in Mechanical Engineering Department in King Fahd University for Petroleum and Minerals.
Scope of Work:
* Performing Research Work since the University has many Research Work with ARAMCO regarding increasing the performance of Static and Rotary Equipment.
* Teaching undergraduate students while I'm customized to give courses and laboratories sessions in the field of Dynamics and Vibration.
(20th Sep. 2005 - up to 1st Feb. 2006) Purchasing Manager at Mechanical Engineering and Contractors ( MEC ), Amman, Jordan.
Scope of Work:
* Direct activities of purchasing in order to control and assure mechanical parts, material supplies and services are purchased at the lowest possible cost consistent with established standards for quality.
* Determine the recommended purchasing policy and procedure within the limits of delegated authority and in accordance with company-wide policy and procedures.
* Direct the activates of purchasing toward the development of new sources, visit vendors and assist in determining vendor capacity.
* Cooperate with all departments requiring purchasing assistance particularly in the field of equipment development and product specifications and substitute materials.
* Review and approve purchase requisitions and orders within the limitations of signing authorities. Supervise the negotiation of purchase contracts, establish and approve source of raw materials and supplies.
(7th Apr. 2002 - up to 14th Sep. 2005) Development Engineer in Jordan Petroleum Refinery Co. Ltd., Zarka, Jordan
Scope of Work: Development engineer is responsible of the following:
ľ Design and preparing construction drawings for variable needs such as hydrocarbon facilities and fire fighting piping.
ľ Preparing and studying of public tenders to purchase special equipment and services, including preparing of technical specifications and studying offers.
ľ Reading and complying with international standards (e.g. NFPA, API, ANSI, ASTM... etc) in designing and preparing standard specifications for tenders
Skills:
ľ Languages:
* English: (Very good in reading writing and speaking)
* TOEFEL Score: 233
* Arabic: (Fluent)
ľ Computer Skills & Internet: (Excellent)
ƒæ Programs: AutoCAD 2004, Ansys, CAE pipe, MT Exchanger, C language, Matlab, Pro Engineering, Pro Mechanica, Web page design ¡Ketc.
Main Achievements In Refinery:
o Design Of Knockout drum for Topping Unit, Including the following:
- Design Calculations based on ASME section VIII Div.1
- Installation of knockout drum based on piping design and thermal stresses calculations.
o Installation of CO2 Degasifier for Reverse Osmosis Unit Including relevant piping design.
o Procurement of Automatic feed filter for Unibon Unit, including the following:
- Preparation of standard specification as per Refinery requirements and according to ASME section VIII Div.1 and UOP requirements.
- Tender evaluation according to Refinery standard specification
- Preparation of installation drawings.
o Procurement of heat exchangers for Hydrogen Unit, including the following:
- Preparation of standard specification as per Refinery requirements and according to ASME section VIII Div.1 and API 661 standards.
- Tender evaluation.
- Approval of manufacturer design drawings and mechanical design calculations according to ASME section VIII Div.1 and review of WPS,
PQR and WPQ.
o Chief engineer in Palletizing System in Jordan including:
- Preparation of pallets and forklifts specifications.
- Tender evaluation
- Start up the palletizing units in LPG cylinder filling stations.
o Procurement of excess flow valves for LPG lines including preparation of standard specification and tender evaluation.
o Design Of Central heating System including procurement of all equipment such as heat exchangers and pumps and preparation of all piping construction drawings.
o Procurement of knockout filter for Asphalt Unit including preparation of standard specifications and tender evaluation.
o Checking and evaluating equipment conditions at shut down stages such as checking thicknesses of pressure vessels and heat exchangers and deciding if these equipment will be replaced or not.
o Evaluation of workshop capabilities of tenderers, including visiting their factories and establishments.
Technical Training Courses:
ƒæ Training in Solar Energy Laboratory in Ecole Nationale d¡¦Ingenieurs de Tunis in the Capital Tunis for 2 months (From June 19th to July 15th, 2001 ), working in the solar energy systems and heating systems of water.
ƒæ Training Course in ¡* Design And Selection Of Pumps ¡¨, (From Apr. 28th to May 9th, 2002) held on the Engineers Training Center.
ľ Short Course in " Supervising Techniques In The Modern Management " (From July 6th to July 10th,2003 ) in Development And Training Center in Jordan Refinery.
ƒæ Training Course in ¡* Design and Requirements Of Fire Fighting-Systems ¡¨, (From Aug. 10th to Aug. 21th, 2003) held on the Engineers Training Center.
ƒæ Training Course in ¡* Heating, Ventilation and Air Conditioning Systems ¡¨, (From Apr. 26th to Apr. 29th, 2004) held on the Engineers Training Center.
ƒæ Training Course in ¡* Technical Course on Pump Design Selection and Maintenance¡¨, (From Apr. 17th to Apr. 20th, 2004) held on the Consultative Center for Science and Technology, Department of Continuing Education in Jordan University Of Science & Technology.
Computer Training Courses:
ƒæ Short Course in ¡* C-Language " held in Internet And Computer Club in Jordan University (From Jan 29th to Feb. 9th, 2000).
ƒæ Short Course in ¡* Computer Maintenance " held in Internet And Computer Club in Jordan University (From June 18th to July. 29th, 2000).
ƒæ Short Course in ¡* MATLAB-Language " held in Internet And Computer Club in Jordan University (From Sep. 16th to Oct. 4th, 2001).
ƒæ Short Course in ¡* 3D Studio Max " held in Internet And Computer Club in Jordan University (From Feb. 4th to Feb. 16th, 2002).
ľ Short course in " Advanced Excel 2000" (From July 6th to July 10th,2003 ) in the ACCOUNTANT STUDIES COUNCEL.
ľ Course in "Comprehensive Computer Skills " including Windows applications, MS Office (Word, Excel, PowerPoint, Access ). From July.27th to Aug.21th, 2003 ) held on the CENTER FOR STUDIES,CONSULTATIONS AND COMMUNITY SERVICES in the HASHEMITE UNIVERSITY.
ƒæ Short Course in ¡* AutoCAD 2004 Essentials and basics (Level One)¡¨, held in ASCENT center for technical knowledge (From June 19th to July 1st, 2004), Amman Jordan.
ƒæ Short Course in ¡* AutoCAD 2004 (Level Two)¡¨, held in ASCENT center for technical knowledge (From July 10th to July 29th, 2004), Amman Jordan.
Personality Highlights:
A capable individual, who meets and exceeds employer expectation, easily establishes and maintains positive rapport with people from all backgrounds.
Very capable in handling out of scheduling tasks, and achieving them with great proficiency.
Doesn¡¦t like to deal with routine, likes to travel, meeting new people and like to learn new things.
Note: All certificates will be provided to you upon your request.
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1451 to 1500 of 6443)
Go to Search Parameters...
Brief Description
Mud engineer
Designer (In J Ray McDermott Engineering Services Private Limited, Chennai, From Aug. 2007 to Jul.2008
8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).
Mechanical Commissioning & Maintenance, Maintenance Planning Scheduling
TO BE ASSOCIATED WITH AN ORGANISATION THAT PROVIDES CHALLENGES APPROPRIATE TO MY CORE SKILLS IN AN ENVIRONMENT THAT NATURES AND PROMOTES A CULTURE OF CONTINUOUS LEARNING AND GROWTH
Process Engineer
I worked five years of the oil field to the national company of geophysics (ENAGEO) in south of Algeria as land surveyor engineer and two years of the mining field to the company of the barite mines (SOMIBAR) in north of Algeria as engineer surveyor
Educational Qualifications:1. Master of Technology in IndustrialSafety Engineering from NIT, Trichy with 85% marks (8.5 CGPA) 2. B.E in Mechanical Engineering with 81.77%. Experinece: 1. From August 2006 to till now - Working as Safety Engineer in Mina Abdullah Refinery of KNPC
Instrument & Control System Design Engineer
I had worked as Development & Design Engineer in Jordan Petroleum Refinery for several years .My work includes Design of static and rotary equipment according to international codes.Also Im holding Master degree in mechanical Engineering that gives advantage to go through research and development.
Analytical Chemist in the field of QA/QC/R&D for Beverage and Water Treatment
Sr. Engineering Technician with 15+ years of industry experience at both Regional and Corporate levels. Highly proficient with Aries and Microsoft Office as well as an IT background.
Business Analyst-Information Technology
ATTENDING BREAKDOWNS IN PLANTS
6 yrs exp.in fired heaters of peroleum .involved in design /documentation & cordination with other discplines
Geologist with a very strong experience in most of the oil/gas drilling operations
A highly qualified, talented and result driven marketing management professional, an AMIE and also holds a diploma in maintenance management with an experience of 15 years in the maintenance, Reliability Engineering as well as conditioning monitoring of rotating machinery. A dynamic, team spirited
More than ten years experience involving in Basic Design & Detailed Engineering, Construction and commissioning in Oil & Gas field. Extensive experience in all phases of Instrumentation Engineering starting from Feasibility Study, Basic Engineering Design Data, Design & Detail Engineering, Construct
Gas Turbine Repair Engineer
B.E., (Bachelor in Industrial Engineering from Indian Institution of Industrial Engineering),
B. Sc. Chemistry (Grade Good)
Well Qualified, Skilled & Experienced proffer in Design, Consultancy, R&D in Civil, Structural, Geotechnical, Architectural and Industrial Engineering
16 years of Piping & Pipelines Projects execution experience in the Industries Refinery, Hydrocarbon and Oil & Gas (Project piping, pipelines, Tanks, structurals, equipments). Knowledge of ASME Sections, ANSI, API & DIN codes /Standards.
Pipeline Integrity Engineer with Metallurgical & Material Engineering background, extensive experiences in the oil/gas both Offshore and Onshore (and swamp) pipelines.
FEA ENGINEER-ANSYS,HYPERMESH,ABAQUS
Masters in Electrical Engineering. Four year experienced. Skills: MATLAB, PLC Programming, Simulation,HSPICE,MULTISIM, Assembly Language, AutoCAD, Visual Basic, C/C++, Operating Systems
I am a 26 years young & energetic, self-motivated diploma Structural Fabrication engineer (Associate Degree) with a total seven years experience in checking & detailing engineering drawings of steel structures & equipments for Refinery Projects.
Sr. Structural Engineer-Ports, Marine & Offshore 8 years experienced, with knowledge of SACS, StaadPro, SAP
BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials
Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.
Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field
Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.
Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.
OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry
PIPING STRESS ENGINEER
Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad
Experienced mud engineer
Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects
Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.
I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based
Structural/piper with pdms & cadworx training
Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.
Reservoir and Production Engineer
yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC
I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.
wireline specialist and downhole gauges engineer
Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.
Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.
I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them
Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
[ 30 ]
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com