Resume - Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas...

Misco Jobs

Resume #68714

CONTACT INFORMATION:
View contact information...

Sir/Mam, I would like to apply with your company as a Marine Engineer where I can use my skills and previous shipboard and landbase experience to help you obtain your company's mission. The enclosed resume will furnish you with complete information concerning my background and capabilities.

I am presently onboard LNG gas tanker and will disembark after my contract end of March 2008. I have 7 years of maritime experience onboard crude oil, gas tanker (Very Large Crude Carrier VLCC, LNG Carrier, steam turbine) and chemical tanker (various types of diesel propulsion engine, Sulzer, Wartsila, MAK, Mitsubishi UEC, B&W) and 5 years as training instructor in maritime training center handling various kind of IMO courses, simulators and designing, developing training courses according to IMO Model courses.

I have an ability to work safely and efficiently without direct supervision, I use initiative to solve difficult problems and work well with other nationalities. In addition, I also work well under pressure and a reliable non-smoker. My hobbies are watching movies and reading books and magazines.

Should you have an opening in your organization for a person with my qualifications, or should you be anticipating one in the near future, I would very much appreciate meeting with you for a personal interview at which time it is suitable for us so we can discuss in greater detail how my experience and genuine enthusiasm for getting the job done, getting it done safe and getting it done right will benefit your company.

In the interim, I thank you for your time, attention and considerations.

Date of birth: October 3, 1973
Age: 34 years old
Marital Status: Married
Height: 5'8''
Weight: 140 Lbs
Place of birth: Pateros, Metro Manila

EDUCATIONAL ATTAINMENT

College: Philippine Merchant
Marine Academy BSMAR-E 1995
Secondary: Pasig Catholic College 1991
Elementary: Capt. H. Francisco Elem. School 1987

LAND WORK EXPERIENCE

Kline Maritime Training Corporation
LNG Simulator instructor
January 2005 – December 2005

Kline Maritime Training Corporation
Senior Engine Instructor
Designing and developing training courses according to IMO Model Courses
March 01, 2002 – December 2005

Protect Marine Deck And Engine Officers of the Philippines Inc.
Engine Simulator Instructor (Norcontrol Simulator)
May 15, 2000 – February 26, 2002

SOP Maritime Review Center
Review Instructor
May 1998

SPECIAL TRAININGS

Kongsberg Operator Course (AIM-2000 Version 7.3)
October 22 – 26, 2007
Kongsberg Maritime
Oslo, Norway

Engine Performance Course
September 24 – 28, 2007
Wartsila Land and Sea Academy

Amos 8.1.22 (Planned Maintenance System)
September 17 – 21, 2007
BW Shipping Phils

Diesel Plant Course for Senior Engineer
September 5 – 9, 2005
NYK-Fil Maritime E-Training, Inc.

Assessor Course – IMO MODEL COURSE 3.12
January 31 – February 10, 2005
Philippine Association of Maritime Training Center Inc. (PAMTCI)

LNG Simulator Training
October 2004
Kline Maritime Training Corp.

LNG Shipboard training (SS AL Rayyan)
September 2004
Singapore Dry dock

LNG Shipboard training (SS AL Rayyan)
April 10 – May 22, 2004
Japan – Qatar – Japan Voyage

LNG Handling Course
March 10 – 21, 2003
Kline Machida Training Center
Tokyo, Japan

Effective Implementation of Document and Data Control
November 08, 2002
Neville Clark, Philippines

Electrical and Electronic Control System
September 04-05, 2002
Marine Technical College
Kobe, Japan

Instructors Training Course – IMO MODEL COURSE 6.09
September 11-22, 2000
Development Academy of the Philippines

Instructors Course for Propulsion Plant Trainer PPT2000 Norcontrol – Engine Room Simulator Certificate of Competence
May 01-07, 2000
Protect Marine Deck and Engine Officers of the Phils.

International Safety Management / General Ship Safety Management
September 06-11, 1996
Seoul Korea

LICENSE/ENDORSEMENT

Control No.
SIRB B088718
Passport UU0112731
Seaman's Registration Certificate 0233603-95
U.S. Visa 84687278
Medical Certificate H-396593
Bermuda Discharge Book 17451
Bermuda License Endorsement 15800
PRC Cert of Competency/COE(No Limitations) 06-1511
PRC License (2nd Engineer) E2-0003284
Crude Oil Washing/Inert Gas System 3769-97
Bilge Water Management Course 2006-49-757
NAC-BSC 14-250945B
NAC-GTF 8-77970
NAC-Advance Fire Fighting 17-86817
NAC-MEFA 18-67835
NAC-Prof. in Survival Craft & Rescue Boat 15-164415B
NAC-Specialized Gas Tanker Course 11-4433
NAC-Specialized Oil Tanker Course 9-13686
NAC-Specialized Chemical Tanker Course 10-8073

OTHERS

Engine Room Simulator Course – IMO Model Course 2.07
GTF Course Certificate
Ship Security Officer Course
Hydraulics/Pneumatics
Maritime Law for Ship's Officers
Control Engineering
Aux Machinery Systems
MARPOL 1& 2
Instrumentation and Automation
Purifiers and Auxiliary Equipment
Boiler Water Treatment
Cooling Water Treatment
Evaporator Treatment

SHIP BOARD EXPERIENCE

Bergesen Worldwide Shipping Phils.
LNG LOKOJA ( Lng gas tanker / steam turbine )
2nd Engineer
November 19 – up to present

Bergesen Worldwide Shipping Phils.
LNG KANO ( Lng gas tanker / steam turbine )
2nd Engineer
January 20 – August 15, 2007

Bright Maritime Corp.
MT TAKIS ( oil / chemical tanker / B&W )
2nd Engineer
February 13 – October 16, 2006

Jo Tankers Phils.
MT JO HEGG ( chemical tanker / Mitsubishi UEC )
3rd Engineer
October 1999 – April 2000

Jo Tankers Phils.
MT JO ASPEN ( chemical tanker / Wartsila )
3rd Engineer
February 1999 – August 1999

Jo Tankers Phils.
MT PROOF GALLANT ( chemical tanker / MAK )
3rd Engineer
June 1998 – October 1998

Jo Tankers Phils.
MT JO ELM ( chemical tanker / Sulzer )
3rd Engineer
Sept. 1997 – May 1998

C.F. Sharp ( Maritime Overseas Corporation )
S/S WESTERN LION ( VLCC / steam turbine )
4th Engineer
November 1996 – August 1997

C.F. Sharp ( Maritime Overseas Corporation )
S/S SOUTHERN LION ( VLCC / steam turbine )
4th Engineer
August 1995 – September 1996

C.F. Sharp ( Maritime Overseas Corporation )
S/S NORTHERN LION ( VLCC / steam turbine )
Engine Cadet June 1992 – May 1993

PHILIPPINE LICENSED HELD

2nd MARINE ENGINEER
Date Registered – February 1999

3rd MARINE ENGINEER
Date Registered – December 1996

4th MARINE ENGINEER
Date Registered – July 1995

ACHIEVEMENT

SECOND MARINE ENGINEER LICENSURE EXAMINATION (1999)
2ND PLACER

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6541)

Go to Search Parameters...

Brief Description

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out