Resume - Quality Specialist experienced in Quality Management System, being aware of spec...

Misco Jobs

Resume #68718

CONTACT INFORMATION:
View contact information...

- QA/QC Engineer -

PERSONAL PROFILE

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques (UT, MT, PT) and offering over 25 years experience in QA/QC environment acquired in Metallurgy (Rolling Mills for Steel Products) and Construction (Prestressed Concrete Cylinder Pipes and Fixed Offshore Structures).

EMPLOYMENT

PETROM SA, Romania (Member of OMV Group) / IMPaC Offshore Engineering GmbH Germany – Petromar Offshore Upgrade & Development Programme (Black Sea).

Project Quality Coordinator (Client Representative) (May 5, 2008 to present)
* As part of an Integrated Project Management Team of Petrom SA I am responsible for capturing and reporting all Quality issues requiring resolution, being the primary offshore interface with contractor.
* Liaising with the Contractor's/Supplier's representatives for scheduling all witnessing and inspection activities as identified within the Programme Quality Plans and Inspection & Test Plans.
* Monitor inspections during operations (onshore and offshore) to ensure these activities are completed in a safe and efficient manner and meet both technical and contractual requirements.
* Perform Site inspection by visiting suppliers/plants, being responsible for expediting completion and delivery of materials and equipment to ensure conformance with purchase order agreements and project requirements.
* Witnessing the construction of Jackets, Platforms, Modules, and offshore hook up at EPC Contractor and Subcontractors sites.
* Maintain Quality audit schedule and perform Contractor Quality audits as required, ensuring timely closeout of audit findings.
* Responsible for establishing and ensuring that preventive actions are implemented and corrective actions are taken within my area of responsibility.

SAIPEM S.p.A. Italy – Kashagan Offshore Project on Caspian Sea, Kazakhstan - Piles and Flares Installation.

QA/QC Supervisor (May 8, 2006 to September 30, 2007)
* Reporting to the QA/QC Project Manager, maintaining liaison link between Barge Superintendent and Field Engineer, I supervised all the quality matters of the Offshore Installation of Piles, Flares Process and Utility Barges;
* Prepared the Project Quality System procedures and Quality Plans in San Giuliano Milanese Office, Italy;
* Maintained an update status of progress against the installation plan by checking completion and signing off;
* Monitored the collection of "As built" data for project;
* Surveyed and verified that scheduled testing and inspections were performed and documented during the execution of work as required by site Quality Control Plans and reference standards;
* Supervised the work of the Quality Inspectors team (Welding Inspectors and NDT Inspectors);
* Coordinated quality meetings with the Client, construction contractors, and site supervision personnel, in order to analyze and contribute to the solution of quality-related problems;
* Temporarily deputised in the position of QA/QC Supervisor - Client Site Representative in Kuryk Yard, surveying the construction works for offshore activities at ER SAI Caspian Contractor LLC (Subcontractor of Saipem).

SC VEMA&COMP SA Deva - Romania: Manufacture of Steel Components by cutting, welding and machining for various branches of equipment, railroad car and road vehicle building industry.

QA/QC Manager (November 1st., 2005 to April 7, 2006)
* Reporting directly to the General Manager, provided leadership for developing and directing Quality Management System and quality improvement for all products and services;
* Maintained all the necessary documentation related to Quality system, ISO and other industry guidelines;
* Organized and implemented the internal audits and supplier audits;
* Managed and maintained the Company's Quality inspection and product release programs for incoming and in-process materials and components, machined products, and finished goods;
* Conducted in-house training and awareness programs for QA/QC Inspectors;
* Managed Customer Complaints;
* Monitored Non-Compliance reports and took corrective actions to assure timely completion.

SNC LAVALIN INTERNATIONAL Inc. Canada/ SARIR PCC PIPES PLANT Libya (Great Man-Made River Project – Phase 1): Manufacture of Prestressed Concrete Cylinder Pipes.

QA/QC Engineer (May 1st., 2003 to December 10, 2004)
* Reporting directly to the QA/QC Manager for all project tasks and approvals, involved in all major areas of Pre-stressed Concrete Cylinder Pipes and Special Pipes Manufacture, I planned and supervised shop inspection program to ensure that products comply with contractual requirements;
* Established and maintained a close working relationship with all project inspectors, the Client and Lead Discipline Engineers on all quality related matters towards the success of the project. Fully knowledgeable on the application of construction codes and standards and Quality Management Systemm based on ISO 9000 series;
* Developed Quality Inspection and NDT procedures and contributed in the implementation of the Quality System;
* Evaluated deficiencies and issued nonconformance reports when applicable;
* Monitored the everyday schedules of final inspections with the Client witness;
* Prepared final quality record documents for the Client.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

QA/QC Engineer - Rolled Steel Products (November 1st., 1990 to March 3rd., 2003)
* Supervised the work of a Quality Inspectors team (20 to 30 Inspectors);
* Responsible for the application of Quality System (in respect of procedures) in the site and developed Quality Inspection Procedures;
* Systematically recorded and handled nonconformity reports issued on site, ensuring that the resolution of nonconformities met the acceptance criteria and that timing complied with site requirements;
* Adjusted and decreased complains referring to unsuitable quality of several products, by visiting or talking to clients about technical issues or problems;
* Defined and put in practice corrective actions for the improvement of products' quality;
* Operated nondestructive ultrasonic testing for special products;
* Prepared and presented technical and program information to the QA/QC Manager.

SC SIDERURGICA SA Hunedoara - Romania: steelworks, foundry, rolling mills for round and square bars, steel wire, sections.

Quality Inspector (November 15, 1980 to October 31, 1990)
* Inspected the rolled steel products (visual inspection and nondestructive ultrasonic testing);
* Administrated and registered Quality Documents (typing quality certificates, document's archive).

EDUCATION

* Bachelors Degree in Metallurgy - Plastic Strains and Heat Treatments - Polytechnic Institute "Traian Vuia" of Timisoara / Engineering Institute of Hunedoara, Romania (1985);
* High School Diploma in Metallurgy - Rolling mill Operator - Nr.1 Industrial High School of Hunedoara, Romania (1979);
* NDT Courses: Ultrasonic Testing Method, Liquid Penetrant Method and Magnetic Particle Testing Method (level II);
* Course Certificate – Quality Management System Documentation (ISO 9001:2000) – Chamber of Commerce, Industry and Agriculture Timisoara, Romania / (2005);
* Course Certificate - Internal Auditor for Quality Management System (ISO 9001:2000) - SIMTEX Certification Body of Bucharest, Romania (2005);
* Specialization Course – Quality Specialist - Chamber of Commerce, Industry and Agriculture Timisoara / Ministry of Labour, Family and Equal Opportunities & Ministry of Education and Research, Romania (2008).

MISCELLANEOUS

* Mother tongue: Romanian
* Foreign languages:
- French (advanced level);
- English (advanced level);
- Italian (medium level, in course of perfecting);
- Spanish (beginner level, in course of perfecting)
* Computer skils: Word, Excel, Internet
* Driving licence: B
* Personal Safety Logbook – Basic Offshore Safety Introduction and Emergency Training (BOSIET), Air Pocket Plus Training, Properties Danger Aspects and Measurements of Hydrogen Sulphide – NUTEC Rotterdam, The Netherlands B.V., (August 2006)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1201 to 1250 of 7041)

Go to Search Parameters...

Brief Description

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

Pipeline Engineers, Project Engineers, Project Managers

design of telecommunication systems namely SDH, DWDM backbone, OTN transmission systems, Microwave communication systems, FTTH systems like GPON, Metro point-to-point Ethernet, PAGA systems, UHF radio, CCTV, IDS systems for Service provider networks, business enterprise, Oil & Gas networks.

I am Chemical Engineer over 18 years of experience in all aspects of combined cycle chemistry, chemical/water treatment operation, quality control and analytical services as Plant Chemist/ Quality Control Supervisor in co-generation power stations. I am a Canadian citizen and willing to relocate.

Maintenance, Installation, Comissioning, Calibration, and Design And Documentation.

Manager shift Combined cycle power plant

Drilling Engineer, 10 years experience, hpht experience, Casing design, advanced well design, drilling fluids, directional drilling, drilling software,

I have 17 years of experience and presently working with Saudi International Petrochemical Co (Sipchem). I have got specialized Skills in maintenance planning and scheduling work process control, CMMS SAP R/3 PM module, Primavera P3 / MS project, RCM, Development and implementation of maintenance

Geologist with large experience in oil and gas exploration and development-Offshore experience and TDC unit manager and well site

Certified Welding Inspector (aged 30 years) with more than 10 years experience (Six years in Saudi Arabia having valid Driving License , Singapore & UAE) Oil & Gas / Petrochemical Projects & Semi-Submersible Rigs, Offshore / Onshore Process platforms seeks a challenging position in Inspection Field.

3D models PDS, Smart plant Review, PDMS, Autocad, Miicrostation, isometrics, Orthographic Drawing Production

Total 12+ years of experience (8 Years in India & 4+ Years in Middle East) in Quality Assurance / Quality Control, Inspection and Welding Engineering from Raw Material stage to Final Stage in Fabrication, Construction, during Shut Down / Maintenance, Repair / Renovation work in Oil and Gas, Petroche

Bsc of mechanical engineering 1994, onshore and offshore rigs expernice, joy stick touch screen rigs

Graduate Chemical Engineer with 08 years experience in field of Internal Corrosion and Chemical treament in oil and gas field.

Post Applied for: Planning Engineer / Sr.Planning Engineer (Primavera and MS-Project).

SOFTWARE SKILL: PRIMAVERA-P3 ,P5 ENTERPRISE , P6 PROJECT ENTERPRISE V.6.0 AND PM+

Seeking A Challenging Overseas Position in a professional org MSProj & Premevira

A highly experienced and versatile project management and professional engineer with over 15 years of engineering and project management experience in the Oil and Gas industries. Extensive experience in various types of oil and gas projects.

Algerian petroleum geologist with +8 years of experience in the area of petroleum exploration and geomechanical engineering. Looking for an international carrier in the area of petroleum geology or geomechanics

During 8 years experience in Oil & Gas industry, I was fully in charge of Reservoir Engineering. I have done 3 reservoir simulation jobs , PVT Analysis, Static Pressure Analysis, Transient Pressure Analysis, Reserve Estimation, Material Balance, Decline Curve Analysis ,field job supervisory

I am a HVAC /Electrical Lead technician with 22years experience 19 years in Multi-national oil companies both onshore and offshore for production platforms and perform preventive maintenance activities, job scheduling including preparation of JSA with relevant parties .

Electrical Engineer

Working with Multinational Oil Company HALLIBURTON WORLD WIDE LTD, in Pakistan as a Senior Service Leader.

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

B. Tech in Metallurgical Engg, 27 years experience in Corrosion & Inspection function in refineries

Senior Piping Designer with experience through both contract and direct work assignments, with major emphasis in the areas of Specialty Chemicals, Pharmaceuticals, Petrochemicals, Sulfur Recovery, Heavy Industry, Gas Turbine & Power Generation.

B.sc Petroleum Engineering, Model 204, SAS, Oracle, Oil and Gas Database Conversion, Production Engineering, Reservoir Engineering, Supported Petroleum Engineering application (Pipeflow, Pipesim)

Senior Petroleum Engineer with long experience in Oil & Gas Industry

Experienced LNG & Petrochemical plant commissioning and maintenance activities in Electrical field. Petrochemical and Utility plants instrumentation experience is an additional experience

Instrumentation Engineer, Detailed Engineering for offshore, FPSO, oil/gas,steel plants

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 [ 25 ] 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out