Resume - Instrrumentation design, detailed engineering, procurement, construction, commis...

Misco Jobs

Resume #69150

CONTACT INFORMATION:
View contact information...

NATIONALITY: Indian

DATE OF BIRTH: 10.04.1966

AGE: 41 Years

ACADEMIC DETAILS

TECHNICAL QUALIFICATION: Bachelor of Engineering

BRANCH OF ENGINEERING: Mechanical

ELECTIVE IN ENGINEERING: Instrumentation Technology
Automobile Engineering
Machine design

JOB DETAILS

PRESENT: From 15.06.'98 onwards - Working with M/S. TGE Gas Engineering GmbH, Taiwan branch as Instrumentation & Electrical engineer in their office/site in Taiwan, China, Brussels and Portugal.

- M/S. TGE Gas Engineering, with its principal office in Belgium/Germany is a leading consultancy company executing turnkey Cryogenic Storage Tank projects.

PAST: 1. From 02.06.'88 to 25.05.91 - Worked with M/s.Keltron Controls, Kerala (India) as an "Erection-cum-commissioning Engineer".

- M/S. Keltron Controls is a premier electronic corporation of Kerala State government, which is executing turnkey Instrumentation & Electrical projects
In major Power, Oil, Steel industries all over India.

2. From 03.06.'91 to 30.07.'92 - Worked with M/s.ICB Limited, Bombay (India) as a "Construction Engineer (Instrumentation)".

- M/S.ICB Ltd., is a leading Instrument/Electrical Engineering & construction contracting company, executing varied projects throughout India.

3. From 02.08.'92 to 25.05.'98 - Worked with M/S. Linde process technologies (I) ltd., Baroda (India) as "Instrumentation Engineer".

- M/S.Linde with its parent company in Germany, is one of the top notch companies in India, executing Air separation, Ammonia, Liquified gases projects on turnkey basis, catering to various clients in India.

EXPERIENCE DETAILS

ENGINEERING – Experienced in Design & Detail engineering for Instrumentation & Electrical projects in the following areas:

1) Assistance in P & I diagrams preparation (Symbol representation as per ISA, Tag numbering, control logic).
2) General Instrument & Electrical specification for the related plant.
3) Basic control system architecture (DCS & PLC) and Electrical schemes.
4) Instrument List as a part of Basic engineering.
5) Instrument specification sheets.
6) Control valve sizing calculations.
7) Flow element sizing calculations.
8) Cable sizing / Voltage drop calculations.
9) Cable tray routing.
10) Instrument location drawing.
11) Junction box, Hand switch location drawing.
12) Lighting layout drawing.
13) Loop drawings.
14) Pneumatic/Wiring Hook-up drawings.
15) Air supply layout drawings.
16) Interlock description alongwith process experts.
17) Logic diagrams.
18) Interlock & protection Logic.
19) Control system Input / Output list.
20) Instrument & Electrical cable lists.
21) Wiring drawings.
22) Junction box connection drawings.
23) Marshalling room/Control room layout.
24) Wiring drawing for Marshalling racks.
25) DCS & PLC specifications.
26) Instrument & Electrical bill of materials.
27) Instrument & Electrical Installation, Testing specifications.

EXECUTION – Experienced in site execution in the following areas:

1. Tender specifications for erection contractors, contract finalization, follow up and co-ordination.

2. Erection Supervision of instruments and related cable tray, tubing, cabling and termination works.

3. Testing of instruments, tubing and wiring.

4. Calibration of Pneumatic and electronic instruments.

5. Calibration of Smart Instruments using Hand held terminal.

6. Commissioning of control room systems like single loop controllers, DCS and PLC.

7. Pre-commissioning activities like loop checking, Interlock checking, simulation tests, factory acceptance tests.

8. Commissioning assistance like lining up, Tuning and leaving in service the Instruments and working hand-in-hand with process experts during start-up of plants.

9. Trouble shooting and maintenance of instruments during plant run.

10. Training maintenance personnel in the plant.

11. Erection, commissioning, Trouble shooting and maintenance of MCC, UPS and other electrical accessories in substation.

12. Scheduling, Progress monitoring and billing with contractors.

13. Progress monitoring, Co-ordination with clients.

14. Billing & payment follow-up.

15. Handing over of systems.

16. Final documentation.

ENGINEERING PROJECTS HANDLED:

Handled the following projects as "Lead Instrument
Engineer" being In-charge of Engineering, Procurement,
Site execution.

1. Linde's Integrated Liquid Hydrogen Plant, ISRO.
2. Linde's Argon recovery unit, RCF.
3. Linde's Ammonia storage plant, FACT.
4. Linde's Purge Gas recovery unit, FACT.
5. Linde's Hydrogen plant in Reliance Petro-Chemical Ltd,.

PRESENT ASSIGNMENT:

1. Lead Engineer (Instrument & Electrical) for TGE's LPG storage projects in FPCC, Taiwan. Basic, detailed engineering for Instrumentation, Electrical activities are ongoing. Activities include supervision of drawing contractors, Inquiries for Instruments & Electrical equipments, Negotiations, Sub-contracting, Scheduling, Progress reporting, Meetings with client etc,.

JOBS COMPLETED WITH TGE:

1) Engineer (Instrument & Electrical) for TGE's Ethylene (3x30,000 m3) Propylene (2x30,000 m3) and Ammonia (2x30,000 m3) storage projects in FPCC, Taiwan.
2) Engineer (Instrument & Electrical) for TGE' LPG (3x80,000 m3) storage projects in FPCC, Taiwan.
3) Engineer (Instrumentation) for TGE's LNG (2x120,000 m3) storage projects in Sines, Portugal for Transgas Atalantico.
4) Lead Engineer (Instrument & Electrical) for TGE's Ethylene (2x80,000 m3) storage projects in FPCC, Taiwan.
5) Lead Engineer (Instrument & Electrical) for TGE's Propylene (1x80,000 m3) storage projects in FPCC, Taiwan.
6) Lead Engineer (Instrument & Electrical) for TGE's Propylene and Ethylene (2x80,000 m3) storage projects in FPC, China.

PASSPORT DETAILS

OTHER PARTICULARS

COMPUTER KNOWLEDGE: MS WORD for data sheet preparations.
MS EXCEL for data base preparations.
MICROSTATION(INTERGRAPH) for
2D & 3D Raceway drawings. Equipment modeling for instrument location drawings.( Awareness)
VISIO-TECHNICAL for Hook-up, Logic
Diagrams, Termination drawings Etc.,
Easy-CAD for general engineering
Drawings.
A-Cad for hook-ups, layout drawings.
PRODOK package for
Instrument basic & detailed engineering.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 6635)

Go to Search Parameters...

Brief Description

Experience in project and construction management of EPC projects in the Oil and Gas Industry and building projects

Project engineerig

Worked as Civil/Structural desgner and piping as well. Perform basic design calculation, planning, scheduling, project evaluation, specifications, bill of materials & cost estimates.

Transmission Engineer for Fiber Optics, Microwave & VSAT System w/ 20 yrs experience

BE Electronics, Experience in Project erection & Commissioning of Electrical & Instrumentation, Procurement of Elec & Inst. Materials

Diploma in Electrical Engineer. AutoCAD. Word. Excel. Windows.

Sr.Mechanical Engineer having 16 yrs of Experience in Petrochemical, Oil&Gas field

Experienced Engineer with 15+ years of on job experience. Conversant with ISO ,international standards and Oil and Gas industry requirements. Can lead a team of inspectors .Has worked in Saudi Arabia, Yemen, UAE and Kazakhstan. Largest contract Value 1.3 Billion USD.

Being a petroleum engineer and having many years of experiences on middle eastern countries ( OMAN,UNITED ARAB EMIRATES, QATAR, IRAN...) could merit for any advertised jobs.

OBJECTIVE My goal is use my chemical and process engineering knowledge in a position as a Process Engineer or simulation engineer in the Refining Industry. Also I would be interested in using my knowledge in Logistics in any Industry

PIPING STRESS ENGINEER

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Project Planner/Scheduler/Controller with experience in the oil & gas, EPC and Construction industry. Involved in Planning, Scheduling, Project and Cost Control.

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.

Reservoir and Production Engineer

yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC

I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.

wireline specialist and downhole gauges engineer

Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

Managing operations, especially in technical management, supervising and engineering of all aspects and activities in petroleum up-stream operations.

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)

Corporate QA Engineer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out