Resume - Senior Instrument engineer with more than 13 years experiences in Oil, Gas, petr...

Misco Jobs

Resume #70035

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
I am a senior Instrument engineer with more than 13 years experiences in Oil, Gas & petrochemical fields.
I am full familiar with most of I&C Standards and also Safety instrumented system like ESD/F&G/HIPPS/SSS,¡K.
I am attendee in some HAZOP and SIL meeting and I am familiar with related IEC standards in this regard.

I have lots of experiences in technical Bid evaluation of most packages as Instrumentation point of view.

Also I prepared all the related I&C documents like Philosophies, spec, data sheets, Schedules, installation documents like Hook-ups, mountings, and also routings.

I had an experience in FEED & BASIC stage of 3 Off-shore platform with Worley co. in KL.

I Have done a detail engineering of a big off-shore compression and process platform in worleyparsons with close cooperation of HHI company.

I passed lots of courses in DCS/ESD/ FCS and also field instruments with some well-known companies.

OBJECTIVE:
------------
Extensive International experiences in Oil& Gas project (Off-shore & On-shore) especially in field instrumentation and Control system.
Particular experience in Technical bid evaluation of Instrumentation and Control system of different kind of mechanical Packages.
Experiences in leading the instrument team to completion the project in specific time schedule.
Familiarize with different kind of Control Systems and also field instruments.
Particular experience in doing SIL study based on IEC standard.
Experience for preparation of some Safety documents specially F&G layouts and Cause & effect charts.

WORK EXPERIENCE:
------------
1995-2002 Nargan Consultant Eng. Co.

Senior Instrument & Control Engineer
Preparation of all instrument documents, i.e data sheets, Specifications, Logic diagrams, Loop diagrams, Hook-ups, Cabling documents as cable routing, cable schedule,¡KControl room layout, Tank management system, Material take-off, Cost estimation,¡KAlso in design of Control systems like DCS,ESD,FCS,F&G,.. for many project as:

Shahid Modarres Pharmaceutical plant
Design of Fire alarm & Fire fighting of all units in BIPC
Preparation of EPC package for Bahregan Manifold & fire fighting project
Farrashband Compressor Station
Sarkhun Gas refinery
Para xylene Production plant in BIPC with Technip Co.
Arak Petrochemical complex(EO/EG).
Pump station in Lavan On-shore
Sea water intake in Assaluye field with Intec Co.
Tank Management system for all 128 tanks in Abadan Refinery
Bahregansar on shore/off shore oil field with Sofresid Co.
Expansion of Kangan gas refinery plant
Ramshir gas injection plant
Tabriz Poly propylene production plant
Qatran Project

Lead engineer in Instrument & Control for below projects:

Lead engineer in C2+ recovery in Marun with Linde Co.
Lead engineer in C2+ recovery & Fractionation in Assaluye with Linde Co
Lead engineer in Crystal melamine prod. Plant in KHPC with Eurotecnica Co.

1/Nov/2002-1/Nov/2003 Pars project Services co.

Technical Manager
Preparing technical proposals for Fire & Gas, Safety valves, On/Off actuators, Ball valves, Pig launcher/Receivers, Flare & burn pit.
Doing site survey in Shiraz Refinery for Fire & Gas systems
Installation and start up of 8 turbine meters and MOV's in Sang Bast Gas reservoir station

1/Nov/2003-1/july/2004 Oil Turbo Compressor Company(OTEC)

Lead Engineer of I&C
Checking of all instrument documents in 11 compressor stations
Preperation of instrumentation documents for 5 booster gas comp. station (Part of 6,7,8 phase of south pars)

Gas city gate station for Shiraz & Gilan province
Renovation of 7 jetties in Mahshahr with FMC company

1/july/2004 -Feb/2007 Petropars Ltd.

Senior Instrument Engineer
Technical evaluation, verification, and clarification of bidders for Bidboland
Gas treating plant, an EPC project with 1.6 B$. Petropars Company is responsible for MC of this project.

Evaluation of Tenderer proposals(Worley & Toyo) for South pars phase 17&18.
Evaluation of Tenderer proposal(Worley Parsons) for South pars Phase 12.

Review of all I&C related documents of TOTAL co. in phase 11.

Senior I&C Engineer in FEED & Basic design Stage of South Pars Phase 12 in Off-shore section with Worley Ranhill company.

Feb/2007- present WorleyParsons Co.
Senior I&C engineer

Work in a big project named¡¨ Umm Shaif Gas Injection ¡* an off-shore project with 3 Process platform and with lots of different systems like HIPPS,Foundation fieldbus,Condition Monitoring System,¡K

I was responsible for all process packages like gas injection compressor, dehydration unit, gas sweetening package, Fire water pump, vapour recovery compressor,etc.

I also attend in all HAZOP meeting for above mentioned packages in Korea Ulsan(HHI Office) for 3 month.
I also responsible for preparation of all Cause & effects charts, specifications and all F&G related documents.
The engineering phase is now finished and the work is now on the way in HHI office.

I prepared all the data sheets, reports, installation drawings, Control room layouts.
Also I checked the Functional design spec for DCS,ESD and F&G from Honeywell and ICS Triplex.

I attended in SIL study sessions which was leaded by ERS co.

EDUCATION & CERTIFICATION:
------------
Educations: B.S, chemical engineering,1995 faculty of eng.
Tehran University
M.S, chemical engineering(process control),1997
Faculty of eng.,Tehran University
M.S Senior Project: Process Control for Distillation tower ¡¨
------------

ADDITIONAL INFORMATION:
------------
* Skilled in IPS,IEEE,ISO,API & BS Standards in I&C subjects
* Preparing Technical Specification
* Preparing Material Requisition
* Preparing Relevant Inquiries
* Technical And Ecconomical Evaluation Of Oil, Gas and Petrochemical Projects
* Expert in Computer Applications, Microsoft Office, Windows XP.
* Technical bid evaluation for Field instrument & control systems
* Control Valves, safety valves, Orifice plates,.. Calc. with relevant software
* Tech. Evaluation of instrumentation & Control items in many Mechanical packages like, pumps, Compressors, Gas turbine, Flares, Injection packages instrument air,N2 generation packages,Loading Arm,etc.
* Full familiar with Fire alarm & fire fighting design and equipments
* Trouble shooting of field instruments like Control Valves, Safety Valves,..

Training Course:

* Tank gauging system of SAAB co. in Tehran Office
* Gas detection system of G.M Co. in Tehran Office
* Safety valves Design, Selection & Test in RSBD co. in France
* On/Off Valve actuators in SRASIN Co. in France
* Transmitters of FUJI co. in Coulton instrumentation Office in U.K
* Ultrasonic meter for costudy Transfer with Krohne Co. in Germany
* Yokogawa system CS3000 &HIMA for both DCS&ESD in Tehran.

Good experiences in Control and instrumentation subjects especially in field of Oil, gas and petrochemical. I involved in several on-shore and Off-shore projects from FEED stage to detail design stage.

Studied chemical engineering in branch of Process control, he matured into the area of I&C engineering with a good capabilities in preparing the related documents, checking, technical evaluation and making reports.

Married with one children, resides in Malaysia and communicates native language Persian and rarely good in English both in written and speaking.

Familiar with calculation software for Control valves, safety valves and flow elements. He also has a vast experience in preparing of field instrument data sheets and specifications.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 401 to 450 of 6635)

Go to Search Parameters...

Brief Description

Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.

Piping Designer. Petro-chem & Power background; design in 2D and 3D environments.

Overall Exp. 14+ years.

Positive, self-motivated and results-driven, a proactive and confident professional with extensive expertise gained in an environment where accuracy and attention to detail are vital. Capable of utilising resources, both human and material, to streamline workflow and achieve time-sensitive deadline

Condition monitoring engineer, rotating machinery engineer, mechanical engineer, maintenanace engineer

Reservoir Engineer with proven record of accomplishments. Extensive experience in pressure analysis, property evaluation, reserves determination, operations, and computer modelling with a skill for enhancing company value. Proven ability to find additional reserves where others have already looked.

Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.

Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.

Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,

Over 24 years global experience in reservoir development and management of oil and gas condensate fields.

Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.

Geoscientist with over 20 years experience with major oil companies in Europe and South America in exploration, production and business development projects.

Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)

QA/QC ENGINEER

20 years of experience in the field of computer s/w and h/w

Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.

I was responsible for maintenance, operation, and repair of all vessel electrical and mechanical systems

. I have sixteen years refinery experience for four location – Texaco Port Arthur, Basis petroleum Krotz Springs - Louisiana, Basis petroleum Houston – Texas and Basis petroleum Texas City refinery. Basis petroleum has been acquired by Valero in 1997.

Supervise small and mid-sized projects involving maintenance/rehabilitation/repair of pipelines and piping systems, good experience at piping equipment selection and sizing, experience with pigging facilities design, experience at pipeline pigging, fluent in English, French and Arabic

INSTRUMENTATION ENGINEER

I&C ENGINEER. ENGINEERING, CONSTRUCTION, MAINTENANCE, TROUBLESHOOTING

Technical / Lead Safety Engineer

NDT inspector LVL II

M.E in Instrumentation Engineering with 16 years Oil & Gas Project design, Detailed Enginerring, Construction & Commissioning .

Senior Instrument engineer with more than 13 years experiences in Oil, Gas, petrochemical and off-shore fields

A qualified engineer with over 16 years of experience in production

Free! Lead/Senior Piping Designer

Sr. PDS Piping Designers / Design Piping Engineer

Senior Offshore Structural Engineer

17 years of experience in piping design & stress analysis with Enppi, Ansaldo Energia, Brown & Root and Dar Al-Handasah.

Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform

XRF, AAS,particle analysis, catalysts(nickel, chromium),Adsorbents(Zinc Based),Water analysis, UV-VIS spectrophotometry, Winlims administration, Training

Piping Field Engineer – Technical Office

19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.

I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.

Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production

Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins

Looking for a job where I can use my talents in the area of Petroleum Engineering and/or Application and System Programming for solving problems

Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.

Acquisitions. Over 20 years of experience in all phases of reservoir engineering with emphasis on economic analysis, acquisitions and divestitures, reservoir characterization, mature field optimization, and reservoir management and exploitation.

SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.

More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Business Analyst Technical Writer Project Manager Programme Director

Take advantage of 30 years corporate experience. I can train your junior staff to become very proficient with Paradigm's GEOLOG 6 software. My specialty is reservoir characterization, with emphasis on probabilistic log interpretation using GEOLOG's Multimin program. Worldwide contracts considered.

Electrical, Control Systems and Instrumentation Engineer: great international experience designing, installing, testing, calibrating, starting up, commissioning, maintaining and repairing industrial electrical, instrumentation and control systems, in the natural gas and others industries.

Senior Engineer with Masters in Business Administration and possessing over twenty-two years of experience in Electrical/Instrument Maintenance and Project works in refining and petrochemical industries.

SAS and COBOL Programmer with DB2 and SQL experience

My experiences have included not only involvement in reservoir engineering , but also having a broad field experiences with an understanding of operations and proficiency in computer reservoir applications.

OBJECTIVE Seeking a challenging position at senior management level in R&D and Manufacturing / Technical Services / Applications Development / Technology Strategy Planning./Project Implementation

Offering MBA Leadership, insightful, analytical, and creative engineering leader successful in conceptualizing and implementing cost-effective solutions and leveraging key advantages in complex environments. Resourceful team builder and project manager adept at building and leading teams.

First 1 2 3 4 5 6 7 8 [ 9 ] 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out