Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #70148 next resume »» CONTACT INFORMATION: View contact information... PROFILE: Over 15 years electrical engineering and research experience. Strong practical and theoretical background in semiconductor physics, electromagnetic-acoustic wave propagation in piezoelectric crystal waveguides, biochemical sensors, signal processing, analog circuit design and more. * 3 years award-winning teaching experience (semiconductor physics, electromagnetics, circuits, etc.) at undergraduate level. University of Maine graduate teaching assistant of the year, 1993. * Three years independent research and development experience (biochemical sensors). * Four+ years experience designing analog/digital and microcontroller circuits. * Four years project engineering experience. * Two+ years experience in an RF (50MHz to 700MHz) lab. * Proficient with SPICE, MATLAB, C, Atmel RISC microcontrollers, Mathcad, MAPLE and Scientific Workplace, AutoCad Lite, and all MS Office products. WORK HISTORY Goodrich Pump and Engine Controls: (www.goodrich.com ): Senior Electrical Engineer, 3/07- present. Responsible for failure analysis and redesigning legacy products for improving yield and reliability. Hamilton Sundstrand/ United Technologies Corporation (www.utc.com ): Senior Electrical Engineer, 5/04 – 3/07. Provide engineering support for electronic control systems for large jet engines. Extensive software and hardware analysis, troubleshooting and failure analysis of customer returns. Cooper/Crouse-Hinds Airport Lighting Products (www.chalp.com): Project Engineer, 2000-1/04. Solely responsible for design, scheduling, cost/component analysis, interfacing with many vendors, qualification testing and transfer to production for 1-3 below: 1. Highly sophisticated fail-safe circuit for maintaining constant current output for airfield lighting. Final product has self-monitoring and correcting capabilities, allows for in-field troubleshooting and software updating. Developed all software, circuitry, circuit diagrams, and wrote all instruction manuals. Passed on first time through Federal Aviation Administration (FAA) qualification testing. 2. 700W ferroresonant constant current controller. Designed to interface with existing circuitry and to comply with Mil-Std 461 for electromagnetic emissions. Wrote all documentation, including qualification test program, production test procedures and instruction manual. Passed all FAA qualification tests. 3. Designed power supply circuit for highly accurate electrolytic tilt sensor. Patentable circuit operates from an AC current or voltage source, while meeting very strict cost target. Passed on first time through FAA qualification testing. 4. Patent pending for the co-development of low power, high power factor power supply for airfield LED lighting. Solely developed innovative software algorithm for monitoring and precisely controlling LED output via pulse-width modulation. Loaded with features, such as end-of-life detection, accurate RMS to DC conversion, self calibration to compensate for component variations, etc. Passed on first time through FAA qualification testing. Andersen Laboratories, Inc (now www.micronetworks.com ): Design Engineer, 1998-2000. Designed Surface Acoustic Wave filters, including both dispersive and non-dispersive bandpass filters (50-700MHz). Extensive use of fourier transforms, software simulations, and RF testing. Project Engineer for novel wafer level packaging technique, including scheduling, research, design, testing and prototyping. Interfaced with many different vendors, scientists and engineers to coordinate project. Biode, Inc (www.biode.com): Research Engineer, 1995-1998. Developed surface acoustic wave biosensors (90-200MHz). Independent R&D included optimizing interactions of biofilms with evanescent acoustic/electromagnetic waves. Derived theory for predicted response. Required knowledge of waveguide theory, acoustics, as well as proteins and DNA and their attachment to organic surfaces. Designed and implemented dozens of experiments over three year period. University of Maine (www.umaine.edu): Graduate Teaching Assistant, 1991-1995. Supplemental teaching for Semiconductor Physics, Electromagnetics, Microwave Lab, Circuits Lab, and Communications theory. University of Maine Graduate Teaching Assistant of the year, 1993. National Semiconductor (www.national.com): 1987-1990. Product support for digital components, including testing, redesigns, and failure analysis. Trained for three months at manufacturing facilities in Malaysia and Singapore. Taught seminar on VLSI design (integrated circuit plot layout) in Malaysia. EDUCATION: MSEE University of Maine, August 1997. Plus 17 additional credit hours towards PhD. Specialized in Surface Acoustic Wave sensors, signal processing, and interaction of acoustic waves with biological materials. BSEE Rochester Institute of Technology, 1987. Emphasis on Microelectronic Engineering, consisting of semiconductor processing, modeling, and electrical testing. PUBLICATIONS: "Characterization of an Acoustic Plate Mode Immunosensor", Master's Thesis, University of Maine, August, 1997. "Comparison of surface transverse wave (STW) and shear horizontal acoustic plate mode devices for biochemical sensors", Frequency Control Symposium. Proceedings of the 1997 IEEE International, pp. 147-155. "Selective Acoustic Plate Mode DNA Sensor", Fifth Int'l Mtg. On Chemical Sensors, Rome, Italy. Sensors and Actuators B. Chemical, Vol. 24, Issues 1-3, March 1995, pp. 129-133. "Improved Acoustic Plate Mode Biosensor", Sensors and Actuators B. Chemical, Vol. 13, Issues 1-3, May 1993, pp. 437-442. "Applications of Unidirectional Transducer in Acoustic Plate Mode Biosensors", Ultrasonics Symposium, Baltimore MD. Proceedings of the IEEE 1993, Vol. 1, Oct. 1993, pp. 331-335. View contact information... «« previous resume next resume »» Search Results (Resumes 251 to 300 of 6742) Go to Search Parameters... Brief Description Over 18 years experience in Natural Gas Engineering Field including research, planning, route survey, design, implementation, installation, testing maintenance and supervision of Gas distribution and transmission line to Industrial, commercial and domestic connections under American standards and sp DSV with over 20 years experience. I am a Senior Process Engineer with 27 years of operation and process design experience in the oil and gas industry. I worked for Saudi Aramco for 23 years as a Senior Process Engineer in an NGL Plant, gas plant, & a refinery. I have B.S & M.S. in Chemical Engineering from University of California. Involved for more than 19 yrs in structural work related to oil and gas industry. Basic/Detailed Engineering, Installation Engineering and integrity assessment of Fixed Offshore Structures (Both jacket and topsides). Familiar with structural analysis programs like SACS, ASAS, SESAM, GRLWEAP, etc. Plant inspection: with API 510, 570, 653. adttional qualification in welding inspection Project/Engineering Manager, 24 yrs Experience in Oil & Gas (Indian Oil Corporation Ltd.) for Development of Terminals & Gas Stations. Projects involve conceptualizing, engineering, budgeting, estimation, tendering, procurement, fabrication, installation, testing, pre-commissioning and commissioning A dynamic professional with over 24 years of experience in Process Engineering, Process Enhancements, Quality Management Systems & Man Management; for petroleum refineries in India & Kuwait Senior Pipe Stress Engineer Upstream and mid-stream experience(27 years) plus underground waste water injection Experienced Materials Metallurgical Engineer seeking a position in research and development facility. Has experience with fuel cells technologies, fuel reforming materials and processes, automotive industry, hydrogen related technologies, engine mechanical design. I am experienced in reservoir simulation and numerical modelling, foamy heavy oil flow, well testing analysis, production forecast, horizontal and multilateral wells, thermal recovery, water flooding, PVT sampling and analysis. I have outstanding experience in the design of high-pressure gas transmission line and its associated facilities in valve stations and also a fuel gas supply line plus governor station to 1800 MW combined cycle power plant in South Korea. Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish. Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals. Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects. Electrical and Instrument Project Execution, Installation and Estimating Telecom field technicians Customer end QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis. Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects. Bachler in Arts + 3 yeart Appranticship in Instrumentation and control Experienced in Mechanical & Electrical Installation Of Equipments in Plastics & Petrochemical Industries having 18 years of sound experience in Commissioning and design, with Bachelor degree unigraphics designer drafter Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines. I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries. Safety/HSE Manager 20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal) I am a diploma holder (3yrs course). Having wide knowledge on electrical / Instrumentation / process control panel board operation. Having 19+ year experience (includs 12yrs Oil and Gas plant). Looking for rotational jobs Petroleum Engineer, Well Site Supervisor 13 yrs exp in oil industry with 6 yrs as a Geologist. Worked in different countries of Asia & Middle East with numerous clients. Experience in clastic, carbonate, & basement reservoirs, HTHP wells, horizontal drain with geosteering tools. Currently working as Wellsite Geologist for Total Yemen. Seasoned and highly knowledgeable Mechanical Engineer with experience of leadership successes in the design, operation/optimization and construction of oil and gas production facilities (Well, artificial lift and gathering systems) Harnesses best-practice project management methodologies to steer m 25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea. 22 years of aircraft maintenance related experiences with the United States Air Force Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division. Reservoir, simukation and production engineer Experience maintenance planner in oil and gas industry. Also has experience in quality control and inspection of materials and spare parts. Knowledge in MS Office applications and Maintenance Managment Computer System Electrical Engineer Technician; 14 years experience; Master's Degree; Commissioning; Pre- commissioning; Inspection; Testing; National Electric Code I am a mechanical & metallurgical engineer experienced in QMS ISO 9001:2000, internal auditing, welding, NDT, materials etc Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position. Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc. Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining. 3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies. Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters. I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes. Strong hold in Erection, Pre-Commissioning,Commissioning and start-up. Managed the activities of two Draftspersons. Supported the International, Offshore and Onshore Divisions in Exploration and Land Departments. I created Structure and Isopach contour maps. Created Land maps with metes and bounds descriptions from leases. Created Cross Sections using well logs, montag I have senior technician diploma from API ORAN (ALGERIA) my works experience is as follow: In the begining, I have worked for paints society since three years after I have change the society for SONATRACH after macking a test and Ibegin the new work as plant operator for one year, after as panelman First   1   2   3   4   5   [ 6 ]   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com