Resume - Reservoir Engineering/Simulation, Software development, Problem Resolution, Cust...

Misco Jobs

Resume #70208

CONTACT INFORMATION:
View contact information...

ENGINEER
Oil & Gas Industry

Over 15 years in multi-disciplinary Engineering, with experience conducting state-of-the-art research in the areas of reservoir engineering and well-testing. Hold master's degree in Petroleum Engineering. Challenge-driven and motivated, known for discovering novel and definitive solutions. Exceptional written and verbal communication skills.

ADDITIONAL AREAS OF EXPERTISE AND PROFESSIONAL STRENGTH INCLUDE:
* Project Management
* Customer Service
* Problem Resolution
* Reservoir Engineering/Simulation
* Thermodynamics
* Fluid Mechanics
* Mechanical Engineering
* Electrical Engineering
* Software Engineering

RELEVANT CONTRIBUTIONS
----------------------
* Created a laboratory-scale flash desalination process plant for research on advanced control algorithms at University of New Mexico/ Autonomous Control Engineering (ACE).
* Developed a mathematical model for horizontal well production dynamics in a coalbed methane reservoir.
* Simulated a coalbed methane reservoir on a horizontal well using SABRE reservoir simulator, for verification. Work was published in petroleum engineering journals and outcomes presented in national and international petroleum engineers conferences.

PROFESSIONAL EXPERIENCE
=======================

VALLEYLAB/TYCO HEALTHCARE, COVIDIEN, BOULDER, CO - 2003 – 2007
PRINCIPAL ENGINEER / SENIOR PROJECT MANAGER (2004 – 2007)
SENIOR SOFTWARE ENGINEER, CONTRACTED THROUGH CORESTAFF (2003 – 2004)
* Oversaw software product development, improving processes and providing reliable software from high-level marketing, product, and system requirements.
* Interfaced directly with team of 20 software development engineers and seven hardware development engineers, participating in software development and testing process as necessary.
* Leveraged engineering and scientific skills to assist in control systems design and development for RF energy-based device development.
* Mentored less experienced engineers.
* Interfaced with tissue research team to develop new treatment processes.
KEY CONTRIBUTIONS:
> Contributed to development of ForceTriad Energy Platform, improving productivity by shortening development time 80% and obtaining FDA and foreign regulatory approval to market ForceTriad within targeted time. Major product launch was instrumental in creation of Covidien.
> Developed the DHF (design history file) for FDA approval.
> Obtained FDA approval to market energy-based surgical devices.
> Developed system to minimize animal testing.
> Created a math model for tissue.

WOODWARD GOVERNOR COMPANY, FORT COLLINS, CO - 2001 – 2003
SENIOR EMBEDDED SOFTWARE DEVELOPMENT ENGINEER
* Developed embedded software and control systems, interpreting internal and external customer requirements for hardware/software platforms.
* Managed development process, collaborating with project management team.
KEY CONTRIBUTIONS:
> Resolved critical quality issue by porting VxWorks operating system to existing hardware platform.
> Decreased maintenance and production cost $500,000 per year, resolving major quality issue by enhancing control platform software and leading design and development of communication modules for distributed control and data acquisition.
> Developed proprietary software library to enable FORTRAN based system models to run on the VxWorks platform, saving thousands of dollars in external consultant fees and maintenance costs.

WIND RIVER SYSTEMS, INC., SUNNYVALE, CA - 1999 – 2001
SENIOR APPLICATIONS ENGINEER
* Supported customers with engineering needs, quality issues, and application development.
* Increased external customer satisfaction by writing new procedures for customer service.

AUTONOMOUS CONTROL ENGINEERING, UNIVERSITY OF NEW MEXICO, ALBUQUERQUE, NM - 1995 – 1999
RESEARCH ENGINEER
* Led research and development efforts, writing proposals for funding, and publishing research works. Supervised five undergraduate students and one graduate research assistant on projects.
* Researched and developed advanced control algorithms for dynamic system control and process control.

NEW MEXICO INSTITUTE OF MINING AND TECHNOLOGY/ PRRC, SOCORRO, NM - 1993 – 1995
PROJECT ENGINEER
* Led project on gravity drainage using imbibition technique at PRRC (Petroleum Recovery Research Center).
* Collected data for research and analysis to develop a petroleum pipeline leak detection system; incorporated sonar devices and techniques for field use (working with Lynx Petroleum Company in Hobbs, NM).
> Developed a mathematical model for horizontal well production dynamics in a coalbed methane reservoir.
> Simulated a coalbed methane reservoir on a horizontal well using SABRE reservoir simulator, for verification. Work was published in petroleum engineering journals and outcomes presented in national and international petroleum engineers conferences.

EDUCATION
=========
UNIVERSITY OF NEW MEXICO, Albuquerque, NM
PH.D. IN MECHANICAL ENGINEERING WITH MINOR IN ELECTRICAL ENGINEERING, 2002. GPA 3.65

NEW MEXICO INSTITUTE OF MINING AND TECHNOLOGY, Socorro, NM
MS IN PETROLEUM ENGINEERING, 1995. GPA 3.65

BANGLADESH UNIVERSITY OF ENGINEERING AND TECHNOLOGY, Dhaka, Bangladesh
BS IN MECHANICAL ENGINEERING, 1991. GPA 3.9

COMPUTER SKILLS
===============
EMBEDDED DEVELOPMENT
Real Time Embedded Systems design and development for Pentium, Motorola 68HC11, Motorola 68K, PowerPC 5xx, DSP, ASIC ASPC2, Infineon 167x, controller development for WARP 2.0 fuzzy logic applications chip.

RTOS
VxWorks, ThreadX, Embedded NT with VentureCom extension.

APPLICATIONS
Matlab, MatrixX, RealSim, LabView, FULDEK, TELEGRIP, AutoCAD, Mathematica, SABRE reservoir simulator.

LANGUAGES
C/C++, assembler (Motorola 68HC11), FORTRAN, VB, and VC++

~ List of Publications Available Upon Request ~

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 6511)

Go to Search Parameters...

Brief Description

Project handling and management as piping engineer

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

More than 18 years experience in DCS Engineering, Instrumentation Detail Engineering, Construction, Maintenance and Troubleshooting in Refineries, Petrochemicals & Project Management. Have worked overseas in Project Engineering arena in Canada, Kuwait, Singapore and India.

Instrument & control Engineer

15 years sound experience in almost all field of Instrumentation including, Project. construction, commissioning, planning, maintenance, Major modification, Revamping etc.

Mechanical Engineer with 13 years of experience in pipeline design, estimating, commissioning and construction management in Oil and Gas industry.

Project management & consultancy experience for large refineries & power plant in Mumbai.

Petroleum engineer with over 16 years of industry & regulatory background in production & injection well drilling, design and operations; including regulatory aspects.

Spent About Nineteen Years In The Marine Field. Thirteen Years As A Senior Electrical Officer Gaining Broad- Based Hands On Engineering Skills Encompassing Servicing ,Installation , Fault Finding , Conversion , Modification , Commissioning ,Surveying , Repair, Running And Maintenance

Offers more than ten years of versatile experience in all phases of petroleum, gas, and alternative production facility operation. Equipped with a master’s degree in chemical engineering and a background in the development of PFDs and P/IDs. Excels at risk/hazard review and mitigation.

Professional DCS expert with 8 Years experience in process automation projects for pharma, oil & gas sector, Lead engineering and Project Engineering experience.

Mud engineer

Designer (In J Ray McDermott Engineering Services Private Limited, Chennai, From Aug. 2007 to Jul.2008

8 years experience as a Drilling Engineer, Drilling Supervisor, Directional Driller & Well Performance Engineer(Onshore & Offshore).

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out