Resume - CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA...

Misco Jobs

Resume #70232

CONTACT INFORMATION:
View contact information...

Profile:

- 6 years of experience covering a wide range of Industries from Power Generation, Pressure Vessels, Oil & Gas Construction and Inspection Services.

- Holding Graduate and Technical Qualifications supported by certifications in NDT and Welding Inspection from reputed Institutions and approved by Saudi ARAMCO for conducting welding inspection.

- Conversant with International Codes as ASME Sec II, Sec III, Sec V, Sec VIII, Sec IX, ASME B 31.3, AWS D 1.1, API 1104 and Saudi ARAMCO Standards, ORYX GTL standards and Quality Assurance Procedures.

- Familiar with a wide range of materials including CS, LTCS, AS( CR-MO), SS and welding processes as GTAW, SMAW.

- Worked with the best names in the Industry like Saudi ARAMCO, ORYX GTL, Bechtel, Technip, NPCIL, IOCL, L & T, VTV.

QUALIFICATION:

Degree: Bachelor of Engineering-Mechanical

University: University of Madras

Aggregate Obtained: 74.2% (First Class)

ADDITIONAL QUALIFICATION:

Successfully completed welding Course, CSWIP 3.1(Certification scheme for welding inspection personnel) conducted by THE WELDING INSTITUTE (TWI), United Kingdom.

TWI - CWI (Certified Welding Inspector) - CSWIP 3.1

Successfully completed ASNT Course - NDT (Non Destructive Testing)

ƒæ ASNT Level II in Ultrasonic Testing.
ƒæ ASNT Level II in Magnetic Particle Testing.
ƒæ ASNT Level II in Liquid Penetrant Testing.
EXPERIENCE:

Company: ERAM ENGINEERING COMPANY W.L.L, QATAR

Project: ORYX GTL, TECHNOLOGICAL IMPROVEMENT

Designation: QC- Welding Inspector

Period: Jan 2008 to till date.

Job Responsibilities:

ƒæ Carryout inspection and verification of welding activities pertaining to fabrication, repair, modification of tie-ins.
ƒæ Witness and evaluate NDT such as DPT, MPT, UT as per the approved QCP.
ƒæ Verification of material with material certificates and witnessing the transfer of heat/cast numbers.
ƒæ Visual examination of materials and welded joints
ƒæ Approval of welders, WPS, welding operator qualification and NDT procedures.
ƒæ Monitoring welding activities as per ITP AND QCP.
ƒæ Monitoring welder's performance and maintaining welder's continuity records.
ƒæ Verifying heat treatment charts.
ƒæ Coordinating with clients for final inspection.
ƒæ Witnessing the pressure test of repair packages, tie-ins and modification packages.
ƒæ Welding Consumables inspection.
ƒæ Identify the non-conformities and review corrective actions.

Company: Consolidated Contractors Company (CCC),
Saudi Arabia (KSA)

Project: Khursaniyah Gas Plant (KGP)

Designation: QC- Welding Inspector

Period: Dec 2006 to Nov 2007.

JOB RESPONSIBILITES:

ƒæ Application of codes and standards and correct use of approved procedures and welders.
ƒæ Review of P&ID, Isometric Drawings, Spool Drawings, NDE Matrix prior to start of Inspection.
ƒæ Inspection of material specification, stock code, color code, heat numbers and their transfer, diameter & schedule etc, as per approved drawings and applicable material codes.
ƒæ Inspection of consumables, storage and handling of special and low H consumables.
ƒæ Review of calibration certificates for ovens, welding machines and inspection tools.
ƒæ Review of Welder Qualification and applicable ranges of welder performance.
ƒæ Fit up inspection, dimension check, alignment check, welds identification, preheat.
ƒæ In process monitoring of welding, preheat, inter-pass temperature
ƒæ Monitoring of process variables and heat input calculation if applicable.
ƒæ NDT selection and review of RT reports and welder performance
ƒæ Witnessing NDT, Hardness testing activities, hydro testing and pneumatic testing.
ƒæ Monitoring welder's performance and maintaining welder's continuity records.
ƒæ Review of Inspection reports and Daily Welding Reports.
ƒæ Ensuring compliance with QA standards and procedures including maintaining inspection records.
ƒæ Participating in internal and external audits carried out by company and Contractor / Client respectively.
ƒæ Coordinating with clients for final inspection.
ƒæ Coordinating with management on quality related issues.

Company: DODSAL Private Limited,
Bombay, Maharashtra.

Projects: Nuclear Power Corporation of India Limited,
KAPP Unit 3 and Unit 4, Karnataka.
RAPP Unit 5 and Unit 6, Rajasthan.

Designation: QA/QC - Engineer

Period: Nov 2004 to Nov 2006.

JOB RESPONSIBILITES:

ƒæ Inspection of Pipes, Pipe Fittings.
ƒæ Inspection of Castings, Forgings.
ƒæ Inspection of Valves, Fasteners.
ƒæ Stage wise Inspection as per QAP.
ƒæ Witnessing/Interpretating DPT, MPT & UT.
ƒæ Witnessing Various Destructive tests.
ƒæ Preparing NDT procedures, Report Formats.
ƒæ Preparing QAPs as per Clients requirements.
ƒæ To coordinate with clients for Inspection.
ƒæ Preparation of QA/ QC Plan, ITP, WPS, PQR.
ƒæ Weld & Casting Visual Inspection.
ƒæ Preparation of stage wise Inspection Report.
ƒæ Witnessing of Welding Procedure Qualification and Welder Qualification tests.
ƒæ Witnessing the hydro testing and pneumatic testing of pipes, pipe fittings, valves, vessels.

Company: Industrial X-ray and Allied Radiographers,
Baroda, Gujarat.

Designation: QC Inspector.

Period: May 2004 to Nov 2004

worked for:

1. L & T Niro - Ranoli, Baroda.
2. Vijay Tanks and Vessels- Sankarada, Baroda.
3. Gujarat Refinery (IOCL) - Baroda.
4. Hazira LNG Plant - Hazira, Surat.

Company: Scanstar Quality Engineers (SQE),
Chennai, Tamil Nadu.

Designation: QC Engineer.

Period: June 2002 to May 2004

JOB RESPONSIBILITIES:

ƒæ Checking the soundness of weld using Ultrasonic Flaw Detector.
ƒæ Witnessing - MPT on Pipe Fittings, valve parts and Welds.
ƒæ Witnessing - LPT on Pipe Fittings, valve parts and welds.
ƒæ Preparation of NDT procedures, Report Formats.
ƒæ Making Isometric Drawings of pipelines.
ƒæ Corrosion survey of Pipe Lines, Vessels, Exchangers, Columns.
ƒæ Weld visual and fit-up checking before and after process.
ƒæ Preparation of Inspection Report and Documentation.
ƒæ Coordinating with clients and third party inspectors.

COMPUTER PROFICIENCY:

Operating System: Windows 98, ME, XP, 2000.
Packages: MS - Office, Adobe PageMaker, Photoshop.
Hardware: Completed Diploma in Computer Hardware.

PERSONAL DETAILS:

Date of Birth: 28th October 1980

Marital Status: Single

Nationality: Indian

Linguistic Proficiency: Tamil, Hindi & English

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 6433)

Go to Search Parameters...

Brief Description

Three years of total experience in Process Engineering

I am a Petroleum Engineer with a degree from the University of Oklahoma. I have two and a half years of experience working on offshore rigs in the Gulf of Mexico in drilling operations. I am interested in opportunities in the fields of drilling, reservoir, well or operations engineering.

Condition monitoring Engineer

Mechanical Engineer

Graduated in B.E. (Chemical Engineering) from Gandhi Institute of Engineering and Technology (GIET), Gunupur, under Berhampur University With 69.32% marks

Mainenance Operation Engineer.Experienced/ exposed to the activites like, QA/QC,SMS,ISM,ISO 14001 auditing,Environmental Regul's,ISPS and Insurance survey's.Trained and certified to Work in Dangerous cargo (Crude oil carrier) ships.Various kind of fire fighting system and techniqs are known.

EOM Steam Turbine Testing Supervisor, Worldwide Co. Service Rep, Schedule, Plan, Assign Personel, Execute, Document, Vibration/Temperature Analysis- Install, Commission, Overhaul- Generator, Switchgear, Pump, Gear, Compressor, Expansion Turbine, Electronics, Telemetry, Condenser, Boiler, Superheater

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Maintenance Engineer

Total experience of 5 years in industrial sector which includes refineries and valve manufacturing companies.

I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11

Bs.D Qualified Mechanical Egnineer Experienced in Piping and Pipeline Construction and Precommissioning

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA, QATAR IN CONSTRUCTION AND SHUTDOWN PROJECTS - OIL AND GAS.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).

Interested in knowing available oppurtunities awaiting.

Licensed Land Surveyor 27 years experience

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

project management.contract management,business management.

4th Class Power Engineering Certificate and 3rd Class Power Engineening Part A1-A2

Seeking Employment in Oil and Gas Industry

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

Gas turbine systems technician

Knowledge about Fabrication process of pressure vessels (heat exchanger), Material science,Welding,Prodution Tech.,Planning, Purchasing

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out