Resume - Ensure accuracy, programs are to exist for the inspection, testing, calibration,...

Misco Jobs

Resume #70252

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Application of standards and safety programs (Risk and incident notification system Stop, Work permit, Risk Assessment, lock out tag out). Conciliation of inventories. Elaboration and work orders management, request, time sheet and payment order. Application of tool RBWS (Risk Base Work Selection) to plan work orders. Knowledge in instrumentation, DCS, PLC, Lact Units. Root cause analysis to detect failures. Inspection to maintenance activities developed to measuring instruments. Inspection of 20",30" and 40" pipelines and valves stations on a 300 kilometers length. Tracking to planned crude oil batch in Joint Venture Pipeline operations. Tracking to planned crude oil batch in Joint Venture Pipeline operations.Witnessing third party proving and calibration of Lact Units, orifice plates, gas turbometer, chromatography meter and ultrasonic meter according to fiscalization norms and API MPMS, AGA standards. Witnessing in activities of tank gauging of floating ceiling. Calculation of volumes produced (crude oil, gas, water). Control and volumes loss investigation. Monitoring to deviations of the process and hydrocarbon measurement. Volume Balance calculation (gas, water, extra heavy oil, diluent, pipeline).Participation in governmental and corporate audits. Application of internal and external norms and standards for the measurement and fiscalization of hydrocarbons. Elaboration and data management of Production and Fiscalization Reports. Making application for approvals of projects to regulatory agencies. Participation through measurement committee in troubleshooting in order to make recomendation for the resolution of measurement problems in all facilities of Operadora Cerro Negro (included pipeline Joint venture). Elaboration of Measurement Operational Procedures. Monitoring to ensure the total closing of gaps concer to measurements. Interface with regulatory agencies and field operations to ensure compliance. Oversee contractors performance in the application measurement practices (FMC, EMERSON, FERRUM, AIVEPET, SGS). Elaboration of Meter control chart with standard desviations
Recognitions: Congratulations from: VP Geocience and VP Engineering (both ExxonMobil Production Company in Houston); President of ExxonMobil Venezuela (included award); due to the satisfactory results on measurement internal audit which represented the first EMPC audit against Measurement and Analysis of Production. MAP (setting the standard for all EMPC on the world).December 2006.
Award from Site Manager due to participation in development of Measurement Operational Procedures.October 2006.

OBJECTIVE:
------------
To obtain a position that allows me to utilize my Knowledges and skills to ensure accuracy, programs are to exist for the inspection, testing, calibration, and routine maintenance of measurement equipment and adequate records are to be kept

WORK EXPERIENCE:
------------
03/20/2000- 05/15/2007. Last Job Title: Measurement Technician from under Production Division in Upstream Operation to Operadora Cerro Negro, a subsidiary of ExxonMobil Corporation in Venezuela that operates in Orinoco Oil Belt.Previous Job Title: Operations TEAM LEADER (03/20/2000- 12/01/2001) under Upstream Production Division.

1999-2000. SUPERMETANOL (PEQUIVEN) Petrochemical - Venezuela.
Job Title: Operations Technician
Knowledge Obtained: Monitoring and control the safe and efficient operations of the production/processing facilities and ship of oil/gas/water as assigned. Checking regularly to ensure production quotas and product specifications is correct.

1998-1999. PETROSEMA, Solid Control in Rig
Job Title: Chemical technician

1997-1998 LIPESA
Job Title: Chemical Analyst

EDUCATION & CERTIFICATION:
------------
Higher Education: Universidad Nacional Abierta, Caripe, Estado Monagas, Venezuela.
Degree: Actually studying Industrial Engineer

Higher Technical Education: Instituto Universitario de Tecnología Cumana, Estado Sucres, Venezuela
Degree: T.S.U. en Quimica (Chemical Technician), November 1997.

ExxonMobil – OCN SHE training. ExxonMobil of Venezuela (40 h).
STOP System (safety in the work through the preventive observation) for Supervisors. ExxonMobil (36 h).
Risks H2S. Global Team (08 h).
Risk Assessment and Management of Chemical Products. Tros Venezolana, a Clariant Group Company (08 h).
Security in the Conduction of Vehicles. Exxonmobil-
The Environment, the Health and the Safety in the Petrochemical and Petroleum Industry. PDVSA-CIED (16 h).
Prevention and Control of Fires. Exxonmobil.
Venezuelan Environmental Norms

Competences for the Success. ExxonMobil of Venezuela (24 h).
Team Work. ExxonMobil of Venezuela (24 h).
Analytical Problem Solving & Decisión Making. ExxonMobil (24 h).
Time Management. ExxonMobil of Venezuela (16 h).
Managing the Interpersonal communications. ExxonMobil (16 h).
Motivation in the Work (24 h).
Analytical Problem & Decisión Making.
Program of Professional Development.
Understanding of the Reading CESAP (16 h).

Elaboration of Exxonmobil (OCN) Measurement Practices Manual
Advance Metrology
Basic Metrology
Uncertainty Calculations
Sampling
Flow Computer (OMNI)
Basic LACT Meter System Operations,
Metering and Proving System
Saab Tank Master (Automatic Tank Gauging).
Coriolisis Meter, turbine meter, PD Meter
Orifice Plate
Bases of Measurements. SENCAMER (16 h).
Theoretical Basic Notions and Static Tank Gauging Practices.
SGS Venezuela (8 h).
Gas Conditioning and Processing. John M. Campbell Company (40 h).
Applications of Chemical Products. Tros Venezolana, S.A. a Clariant Group (8 h).
Upstream Early Production and Operational Procedures. Vepica Baker (16 h).
Uptreams Operation. Vepica Baker (8 h).
Well Testing.
Processing of the Crude Oil and Produced Water.
Electricity for Hydrocarbons Plants Operations.
Production /Processing Facilities
Ariel Basic Service School (Compressor), OHIO, US
Control Valve Engineering I
Contract Administrator
Contratation Managment

ADDITIONAL INFORMATION:
------------
Professional with vision organizacional, formed with great attach to the standards of safety and with a high sense of commitment with the good performance of the corporate operations through the teamwork. always I am willing to confront new challenges with a great sense of ownership, dynamism, assertiveness, empathy and proactively under an environment of pleasant work based on good interpersonal relations. My work is oriented to the excellence and success of the business objectives, supporting me in my greater fortresses (analytic and enterprising) with a self motivation,leadership and facility expressing,directing and transmiting the guidelines of business management.

Measurement Committee. ExxonMobil of Venezuela.
* Upstream Measurement GlobalShare.This is a listing of measurement practitioners involved in metering and analysis as well as related business controls for ExxonMobil upstream and downstream affiliates on the world.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 6433)

Go to Search Parameters...

Brief Description

A Bsc in chemistry with a wide range of experiences in the mud &work over and completion fluid engineering. Able to work on my own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. Presentable, dynamic, adapt

Working as an Electrical technician in Gas purification plant, dealt with zone classified equipments,experience of UPS,PLC,Switchgears,power generation,well head solar control,CP system, fire pumps control,different projects,CMMS,RCM, I have B.Sc (Bachlor of Science) and DAE of ELECTRICAL

4 yrs experience as Pipe Stress Engineer for the Oil and Gas and Petrochemical Industry

Proactive multilingual HSE Advisor/Trainer with 7 years onshore experience in multicultural working environment. Strong interpersonal and presentation skills. Team player with abilities to develop safety programs conducive to results.

Coiled Tubing Engineer with strong background in wired coiled tubing applications (E-Coil). Competently served as Coiled Tubing Technical Engineer, Operations Supervisor (personnel & equipment logistics) and Senior Coiled Tubing Engineer. Working knowledge with industry standard software.

Bachelor's Degree (4 years) in Civil Engineering, Construction Engineering, Design and Engineering, Mechanics,Hands on experiance in STAADpro 2006, MathCAD-12, AutoCAD, Smart Plant Review Soft, MS Office

Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant

Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.

Geophysicist Engineer./ Reservoi -Petrel- Modeller

Ensure accuracy, programs are to exist for the inspection, testing, calibration, and routine maintenance of measurement equipment and adequate records are to be kept

Scientist with 11 years R&D experience in Fischer-Tropsch catalysis, oligomerization and polymerization.

12 years experience in industrial and general maintenance field.

B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project

Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.

Structural engineer

Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.

18 years of experience in operation and commissionng of oil&gas,refinary and petrochemicals.

Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants

A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.

Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.

Analyser engineer with 15 years experience

Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc

B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.

Triconex Engineer with 15+ Years Experience.

I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs

12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).

11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.

HSE /SAFETY -Engineer /Specialist /Advisor /Officer - with 7 years of experience in Oil & Gas

Process Engineer in WorleyParsons, a leading global company working in oil and gas industries. Briefly, my job description includes performing PFDs, PI&D, Safety review/approval, process simulations, equipment sizing, process calculations, and optimization and conceptual studies.

Directilnal Drilling

Diploma In Electrical Engineering - Worker's Institute of Technology

16 years in drilling and completion fluids, experience and knowledge in cementing too.

PDMS, SP3D, PDS Piping Designer

Excellent in troubleshooting electrical faults, Knowledge in electronics, hydraulics as well as pneumatics also.Studied PLC, SCADA programming.

ASNT NDT Level III (UT) & ASNT Level II inRT, MT & PT.

Petroleum Engineer with over 7 years and a half of experience in E&P, 5 of them of specific experience in Oil and Gas production operations, workover/recompletion program design and wellsite supervision, surface facility design and downhole experience, operating expense and decline curve analysis

Senior engineer (piping construction & mechanical installation engineer

•Installation, loop checking, Commissioning and maintenance of online Analyzers

Mechanical engineering (heat and fluids)

Senior QA/QC Engineer & Welding Engineer with M/s.Babcock Borsig Service. Having well experience with EPC Projects, Fabrication works, Shutdown jobs, Refurbishment works. I am interested in Oil & Gas Environment.

I'm BSc mechanical engineer and having over ten years of experience in the field of operation and maintenance.

I am a Senior Designer in offshore structures having more than 19 (nineteen) years of experience in my field. I am having hands on experience in checking of all offshore structural drawings viZ, Jackets, horizontal and vertical framings, decking etc.

With fourteen(14) years experience in Piping Design and Field Engineering Works of various Petrochemical, Oil Gas Plant from feed engineering up to detail design. Capable of checking of piping design up to IFC drawing and with experience of site engineering works.

electrical technician to repair n maintain all HV/LV electrical machines n equipment,testing them, trouble shooting and corrective maintemance.3 yrs diploma cource completed in electrical engineering.11 yrs experience in electrical jobs.result oriented n confidence in work.

Excellent organization skills

Over 8 years experienced on diffrent type of rig work over,deep and ultra deep rigs which done explratery wells. i passed the Diploma of Associate engineering in Mechanical. I done Engine overhaulling CAT D398 & Draw Works overhaulling.

1990 Diploma in Mechanical Engineering

I am Bachelor of Science in Computer Science and Engineering.working as a SCADA Engineer in PGCB about 5 years.

Process operator of Fluid catalytic cracking unit and Hydergen gereration unit

Subsea Installation Supervisor of wellheads, XT,s and completions.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out