Resume - I have been a Process Engineer for sixteen (16) years. My experience includes p...

Misco Jobs

Resume #70417

CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC projects.

SIGNIFICANT ACCOMPLISHMENTS

- Familiar with front-end process design, detailed design, process optimization, simulations, and project coordination.
- Prepared the technical proposals for oil & gas EPC tenders.

EDUCATION

- M.S., Petroleum Reservoir Engineering University of Petroleum Technology
Ahwaz / Iran (1996)
- B.S., Chemical engineering Engineering faculty of Tehran University
Tehran / Iran (1989)

EXPERIENCE

2007 - (Present) WorleyParsons MEG

Calgary, Alberta
Senior Process Engineer

Responsible for front-end process design, detailed design, process optimization and simulations.
Project work includes:
Working on HUSKY Tucker Thermal SAGD Project with the following responsibilities:
- Performance of required simulations
- Preparation of PFDs and PIDs
- Line sizing calculations and preparation of line list
- Preparation and checking of equipment and instrument process datasheets

2005 - 2007 Borna Process Consulting Engineers
Tehran / Iran
Engineering Manager

Major responsibilities were scheduling and assigning engineering resources, reviewing and approving engineering outputs of engineering disciplines, managing engineering costs vs. project budgets, and establishing and controlling technical relationships with customers / vendors.
Project work includes:
Performance of Basic and Detail Design of KARANJ/ PARSI Crude Oil Desalting Plant Project.
Preparation of Technical & Commercial proposals for the following Tenders:

- KURDESTAN LDPE Plant with LURGI AG as Consortium
- KHARG Island Power/Steam Plant in Kharg Olefin Complex
- KHARG Island Utility/Offsite Plant in Kharg Olefin Complex
- BINAK Crude Oil Desalting Plant
- ABTEYMOOR Crude Oil Desalting Plant
- KARANJ-PARSI Crude Oil Desalting Plant
- GHALENAR Gas Injection Plant
- Power Generation Unit(85 MW)in KANGAN Gas Refinery

2001 - 2005 Oil Industries Engineering & Construction Company (OEIC)
Tehran / Iran
Senior Process Engineer / Project Engineering Coordinator

Acting as process lead engineer and performance of process design activities of a number of NIOC and NIGC offshore and onshore projects, My major responsibilities could be summarized as below:
- Process simulation and preparation of heat & material balance.
- Preparation of PFDs/UFDs and PIDs.
- Preparation of Utility Summary
- Preparation of major equipment specification/data sheet.
- Process/Utility description.
- Operational and Guaranteed data.
- Estimation of fixed equipment weight and paint & insulation requirements.
- Contribution on preparation of documents and drawings of other engineering disciplines such as:
. Site Preparation and Grading
. Fire Zones
. Plot Plan
. Electrical Load List
. Hazardous Area Classification Plan

Project Work Includes:

South Pars Project, Phases 9 & 10

Responsible for the coordination required for the performance of South Pars Project Engineering Phases comprising of:
- Front End Engineering Design (FEED) and
- Detailed Design, among the selected engineering contractors, OIEC and the other consortium partners.

1995 - 2001 Chagalesh Consulting Engineers Co.
Tehran / Iran
Senior Process Engineer

My major responsibilities could be outlined as follows:

- Responsible for feasibility study and basic design of Kharg Island Projects.
- Resident engineer during implementation of basic design of Butadiene plants at LURGI's offices, Frankfurt/Germany.
- Project specialty leader of process department in the course of detailed design of Butadiene projects and performing coordination with other engineering disciplines.

Work on basic/detail design and feasibility study of oil, gas and petrochemical projects. The main involved projects were as follows:
- Kharg Island waste water treatment unit
- Tabriz Butadiene Extraction Plant
- Amirkabir Butadiene Extraction Plant

Involved in process design and debottlenecking of NIOC-IOOC crude oil production installations and oil & gas gathering systems:
- Debottlenecking of FX and FZ production platforms of "Foroozan" offshore oil field
- Debottlenecking of "Aboozar", "Dorood-1","Dorood-2" and "Foroozan", onshore production units
- Basic Design of Mobile Oil Treatment (M.O.T) Facilities

1991 - 1995 National Iranian Oil Company Onshore Fields
Ahwaz / Iran
Process Engineer

Responsible for process design of Oil & Gas Projects Department. Working on basic and detail design of following projects:
- Qalenar 15,000 bbl/d production unit
- Masjed-i-Soleyman 30,000 bbl/d production unit
- Masjed-i-Soleyman 30,000 bbl/d desalting unit.

Involved in process design and debottlenecking of a number of NIOC's installations in Iranian south oil fields such as:
- Gas gathering networks
- Crude oil flowlines to production units and exporting crude pipeline gathering system
- Glycol dehydration units
- Rich gas compressor stations
- Natural Gas Liquid (NGL) Units

FREELANCE PROJECTS

- Debottlenecking of Furfural Extraction unit
- Expansion of MEK Dewaxing unit in BEHRAN Oil Company (Formerly ESSO)

SPECIAL QUALIFICATIONS

- Process Simulation and optimization.
- Preparation of Process Flow Diagrams, Heat and Material Balance, Process Description and Data Sheets, Thermal Design and preparation of Data Sheets for Shell and Tube Heat Exchangers.
- Preparation of UFD and PID.
- Flare Load Calculations.
- Performance of Hydraulic Calculations.
- Pipeline process design calculations.

COMPUTER KNOWLEDGE

Good knowledge of various process design / simulation packages including PRO/II, PIPEPHASE, HEXTRAN and HYSYS. Also familiar with MS-WORD and MS-EXCEL.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 6511)

Go to Search Parameters...

Brief Description

Drilling Fluids Program Supervisor/Well Site Supervisor

Over 21 years of management and hands on experience in a field of Procurement, Fabrication, Installation, Commissioning start up, Operation and maintenance activities. Related to Oil & Gas marine, On & offshore structure, Ship repair and EPC fabrication work, Petrochemical, Utility plant.

Working in Oman as a Instrument Engineer, I have 20 years exp in Instrumentaion and Analytical

Senior Chemist Supervising the sampling/testing Petroleum Refinery product streams and finished products and issuing Certificates of quality (COQ) for the products

IAM A QUALIFIED CORROSION ENGINEER AND IHAVE BEEN WORKING WITH WAHA OIL COMPANY SINCE JANUARY 1984, THEN WITH GECOL COMPANYTILL DATE,LAST TWO POSISION HELD , I- CORROSION SECTION SUPERVISOR (GIALO FIELD) 2- COORDINATOR OF HIGH COMMITTEE IN PROJECT DEPARTMENT.

Drilling Fluids Engineer, Experience with All types. Over 30 years in field. World wide experience, Presently working Ultra-Deepwater projects in GOM.

Having 18 years of work experience in Project Management / Constrcution / Fabrication

As Specialist Professional Engineer (Training Engineer)/Mechanical Training Instructor supervisor grade C1, C2 in all aspects of Training and Development (coach and prepare learning materials, capacity and profile building, skill-transfer and counterpart training).

Prodigiously experienced and qualified Engineering Professional, with an enviable, global, 30-year background in the Oil & Gas Production and Processing (On-Shore and Off-Shore), Refining, Petrochemicals, Chemicals, Compression and Gas Turbines industries.

19 Years as “Instrumentation & Controls Engineer- PMT/ EPC Roles in Oil& Gas, Petrochemicals”.

Reservoir engineer / software engineer. 11 years reservoir engineering; 8 years software engineering in other industries. Keywords: reservoir modeling; simulation; upscaling; production forecasting; reserves estimation; well test analysis; Eclipse; VIP. Availability: immediate.

Senior Civil/Structural in Oil/Gas Field

Well completions & workovers. Sand control, stimulation. Domestic & international. Onshore & offshore.

I am a senior electrical engineer and project engineer with over 30 years experience largely gained within the Petro-Chemical, Liquid Natural Gas (LNG) and Power industries. Experienced in UK and overseas operations both on and offshore, Start-up, resident and project based engineering roles. A good

pipeline inspection and tyhird party inspection

Petroleum geology engineer graduated from Algeria in 1974 , worked for The Sonatrach - Exploration division until 1982 working fro water well drilling in Jordan and still , supervise all drilling , geological and tendering activities, speaking English, French & Arabic languages.

Petroleum Engineer with postgraduate studies in System Engineer and Operations Research, over 20 year of experience, working in projects in Peru, Venezuela, Brazil and Argentina, in Offshore and Onshore areas. Involved in secondary, pressure maintenance and horizontal wells recovery projects.

Instrument / Controlsystems Engineer

Extensive knowledge in control system design for industrial applications specially with ABB and YOKOGAWA DCS systems ,software design and software programming with C, C++,Visual C# and Visual Basic .

Geologist geophysicist interpretation

Civil Engineering from University of Indonesia (1989), 3 Years experience in engineering consultant company, 13 years in contractor company as project and HSE coordinator at various project (1991 - 2004), 2 Years as Supervisor at Petrochemical project, and 2 years as HSE coord at pipeline project.

Graduate with an Engineering degree having 20+years experience

HSE Engineer/ Senior HSE Engineer/ Deputy HSE Manager/ Permit to work co-ordinator/ Authorized Gas tester/ HSE Trainer/ Sea Survival holder/

Graduated in Mechanical Engineering. Have more than 20 years of Oil field experience. Domain: Drilling Engineering.

Petroleum Measurement Specialist Liquid and Natural Gas. Chemist and Lab Manager in LPG and Natural Gas. Measurement Supervisor for large pipeline company. Interested in challenging position in Measurement Field.

Mud Engineer

Electrical Maintenance Engineer With over 30 years of experience in providing services and solutions to electrical maintenance and Training & development etcin the engineering and Oil & gas industry.

Geophysicist with more than 15 years international experience in geophysics for major oil and gas companies.

Mechanical engineer for heat exchanger, package, boiler, fired heater, fabrication, HTRI, compress

PhD in Mechanical Engineering with emphasis on Materials and Metallurgic Engineering. Special knowledge in Surface Technologies, especially Thermal Spraying. a German citizen with Permanent Resident Status in Canada.

SENIOR PROFESSIONAL ENGINEER OF 30 YEARS DIVERSE EXPERIENCE

Almost 18yrs experience in oil & gas company (CAD/INtools Administrator

A highly focused, enthusiastic and innovative Petrophysicist, with almost 18 years practical work experience in the Oil & Gas industry, both with a major service provider (Schlumberger) and major Oil & Gas producing companies (Qatar Petroleum, Zadco, Rasgas, Shell). Determined and results oriented.

Seventeen years of combined experience of Operation and Technical support to maintenance unit as reliability engineer in safety dominated Nuclear Power Plant. Where safety is the utmost goal beside operation of the plant and production. Extensive experience in reliability centered maintenance

I am a Process Commissioning Engineer having more than 18 years experience in pre-commissioning, commissioning, startup, operations, trouble shooting, performance testing and hand over of oil and gas facilities, refineries, gas to liquid plant and fertilizer plants. I have hands on experience in the

Chief Metallurgist

Multi-Disciplined NDT Technician/Inspector with Rope Access. UT Level 2, MP Level 2, PT Level 2, IRATA Rope Access Level 1. Int Offshore Survival Certification.

Participates in inspection of Gupco’s R/Sh facilities to provide adequate advise on corrosion matters, especially MIC problems

Wellsite geologist , Operation geologist ,The work is entirely based on a rig where the work activities during exploration and appraisal drilling projects are typically undertaken

I have 19 Years Experience (15 Yrs at Middle East and 4 Years at India) in PIPING FABRICATION, STORAGE TANK FABRICATION, WELDING, NDT, QA/QC, MECHANICAL AND PAINTING JOBS (QA/QC Activities, Inspection, Coordination & Supervision), in large International Major Construction projects (PETRO-CHEMICAL,

process engineer

I have been a Process Engineer for sixteen (16) years. My experience includes process design of oil & gas plants, expertise in conceptual, basic design and detail engineering activities, experience in steady state process simulation, and expertise in executing project engineering management of EPC

Marine engineer, 1st Class Certificate and Offshore experience.

Electrical Engineer, B.E qualification and 22 years of Electrical Power Distribution Design experience

Project engineering as well as civil structural design experience in the oil and gas, industry and civil works design, project management and construction environment

I have 22 years of extensive experience from different Petrochemical plants, Oil & Gas , Power plants.

20 years combined working experience in Project Engineering, Construction, Design, Installation and power hook-up activity, Test and Commissioning of Electrical and Instrumentation Equipment including the Preventive and Corrective Maintenance

Telecom Contractor ,english speaking ,Bell System Trained, college degree in Telecommunications ,20 years plus Outside Plant Technician and AVAYA ACS PBX's seeks contract/fulltime work in Middle East or almost anywhere in the world.

Having strong Process and Operations background, diversified knowledge and experience of Oil Industry for approx. 25 years in Process Engineering, Operation, Projects initiation, Coordination and commissioning, Product and Market Development, Pricing, Techno-Economic evaluation, Client / Customer

A highly competent Senior Electrical/Instrumentation Engineer who has developed supervisory capabilities; QA / QC inspection skills; installation maintenance expertise; pre-commissioning, testing and commissioning competence; safety awareness; organising and co-ordinating flair; fault-diagnosis

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out