Resume - Has more than Seventeen (17) Years of continuous experience in Cost Engineering ...

Misco Jobs

Resume #70600

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Pre-Construction Phase: Preparation of budgetary estimate; preparation of value engineering in the event that Owner's fund was not enough; coordination with consultants/designers; preparation of detailed estimates, bid documents and evaluation of bids; preparation of construction schedule and cash flow; preparation of contracts and notice of award or notice to proceed.
Construction Phase: Project supervision and monitoring of schedule; evaluation of contractor's billing and additional works/variations; coordination with consultants, designers and contractors; preparation of comparison between the actual construction cost versus the budgetary estimate.
Post-Construction Phase: Preparation of final inspection and acceptance certificate to different contractors; consolidating all documents needed in turning over the project such as the as-built plans and occupancy permits.
Projects involved are from medium to high rise residential/commercial buildings, hotels, clubhouses, log homes, MRT, warehouses, cinemas, low cost housing, infrastructure works. Also, with knowledge and experience in structural design.
-------------

OBJECTIVE:
------------
To work in a challenging role that will innovate career growth. To work on a company that provide opportunities and challenges to new ideas of innovation.
------------

WORKING EXPERIENCES:

DECEMBER 2006- DECEMBER 2007
Name of Company: Al Rajhi Construction-
Sharjah, UAE
Position: SENIOR QUANTITY SURVEYOR
Duties and Responsibilities During Tendering:

* Preparation of detailed take-off for unit cost derivation for tendering using the Construction Computer Software (Candy).
* Preparation of tender clarification.
* Preparation of request for quotation from different suppliers and subcontractors.
* Summarizing and preparation of tender document for the Client.

Duties and Responsibilities – Construction Stage:

* Preparation of correspondence requesting for the issuance of Engineer's Instruction in order to validate works.
* Evaluation of subcontractor's monthly billing and variation works.
* Preparation of monthly payment application to the Client by computing the monthly percentage accomplishment, attaching drawings pictures, drawings and other documents to validate the claims.
* Preparation of variation by doing the detailed take-off and gathering all documents to substantiate claims.

Project Handled:
* Al Salam City- INFRASTRUCTURE Project (Including MEP scope)
* Jebel Ali Downtown Infrastructure Work (including MEP scope)
* Business Bay View – Business Park Infrastructure (including MEP scope)
* Al Anbar Low Cost Housing Infrastructure Wok
* Palm Jebel Ali Crescent A – Infrastructure Works and Bridge

OCTOBER 2005 – DECEMBER 2006
Name of Company: Peremba Construction (Malaysian Firm)
Dubai, UAE
Position: SR. QS/ CONTRACTS ENGINEER
Duties and Responsibilities:

* Preparation of correspondence requesting for the issuance of Engineer's Instruction in order to validate variation works.
* Preparation of variation by doing the detailed take- off and gathering all documents and drawings required in order to substantiate claims.
* Preparation of unit cost derivation for new items not reflected on the Bill of Quantity. This will include attaching invoices for materials and sub- contracted items.
* Evaluation of subcontractor's monthly billing by checking the accuracy of accomplishment.
* Preparation of recommendation of payments for subcontractors
* Evaluation of subcontractor's claim for additional work by means of verifying the validity of claim; checking accuracy of quantities against the revised drawings; checking accuracy of unit cost for scope of work already specified in the contract and checking the accuracy of unit cost derivation for new items not yet included in the contract.
* Preparation of monthly payment application to the Client by computing the monthly percentage accomplishment, attaching drawings, pictures and other documents to validate the monthly claim.

Project Handled:
* Movenpick Hotel and Center Residence in Deira, Dubai. UAE

JUNE 2003 – AUGUST 2005
Name of Company: EAST WEST Center- Philippines
Position: PROJECT MANAGER (CONSULTANT)
Duties and Responsibilities:
* Preparation of bid and contract documents
* Preparation of in house detailed estimate that will serve as construction cost guidelines and compare it with the contractor's bids.
* Evaluate Contractor's proposal by means of checking the accuracy of quantities and unit prices, verify completeness of scope of work and check compliance with the specifications and other requirements in the Bid Documents.
* Prepare budgetary estimates in order to establish the funds required to complete a certain project.
* Prepare value engineering cost in order to meet the available funds of the Client/Project Owner.
* Prepare cash flow to inform Client/Project Owner of the monthly expenditure of the project.
* Prepare recommendation to the Client/Project Owner for the Contractor with best offer.
* Prepare and issue a Notice to Proceed and Notice of Award in favor of the winning Contractor.
* Prepare project schedule in MS Project for strict compliance of main contractor & sub- contractors.
* Lead the coordination meeting between client, designers and contractors.
* Daily checking of quality and quantity of works of contractors as per technical specification.
* Evaluate Contractor's claim for additional work by means of verifying the validity of claim and checking accuracy of quantities and unit cost.
* Prepare recommendation of payments for Contractors.

NOVEMBER 1999 – MAY 2003
Name of Company: INTERPRO, INCORPORATED- Philippines
Position: Contract Administrator/ Quantity Surveyor
Duties and Responsibilities:
* Prepare budgetary estimates in order to establish the funds required to complete a certain project.
* Prepare value engineering cost in order to meet the available funds of the Client/Project Owner.
* Supervise and check the in-house cost estimate that will serve as the Construction Cost Guidelines.
* Evaluate Contractor's proposal by means of checking the accuracy of quantities and unit prices, verify completeness of scope of work and check compliance with the specifications and other requirements in the Bid Documents.
* After the technical analysis and evaluation, negotiate with the three lowest bidders for further price discount.
* Prepare recommendation to the Client/Project Owner for the Contractor with best offer.
* Prepare and issue a Notice to Proceed and Notice of Award in favor of the winning Contractor.
* Prepare Contracts in favor of the winning Contractor.
* Evaluate Contractor's claim for additional work by means of verifying the validity of claim and checking accuracy of quantities and unit cost.
* Prepare recommendation of payments for Contractors.
* Track payments made to Contractors.
* Monitor actual cost incurred for the project versus the approved budget.
* Inform Client/Project Owner for the effect in the approved budget whenever there is a revision in construction drawings.
* Prepare cash flow to inform Client/Project Owner of the monthly expenditure of the project.
* Close coordination with the Construction Manager to tie up construction progress versus the programmed cash flow.

Projects Handled:
* Condotel Manor 2E is a 4-Storey Hotel Building with a total floor area of 16,800 square meters located at Camp John Hay, Baguio City.
* Golf Clubhouse with a total floor area of 5,500 square meters located at Camp John Hay, Baguio City.
* Voice of America Log Homes – 25 units of log cabins wherein the average floor area per unit is 600 square meters located at Camp John Hay, Baguio City.
* Country Homes – 42 units of typical houses wherein the average floor area per unit is 250 square meters located at Camp John Hay, Baguio City.
* Duplex Log Unit – 7 units of log cabins wherein the average floor area per unit is 240 square meters located at Camp John Hay, Baguio City.
* Renaissance 3000 is a 31-Storey with 4 Basements Residential/Office Building with a total floor area of 70,619 square meters located at Renaissance Center, Meralco Avenue Pasig City.
* Renaissance 5000 is a 31 Storey with 4 Basements Residential/Office Building with a total floor area of 70,020 square meters located at Renaissance Center, Meralco Avenue Pasig City.
* Tower B of Eight Sto. Domingo Project is a 17 Storey Residential Building with a total floor area of 37,456 square meters located at Biak-na-Bato/Calamba Street, Quezon City.
* Poro Point Development Project located at San Fernando, La Union which consists of Temporary Convention Center, Beach Villas, Beach Clubhouse and Administration Building.
* Site development for ECOCENTRUM Business Park located at Southwoods, Binan Laguna. ECOCENTRUM has a total lot area of 25 hectares.

MAY 1996 – OCTOBER 1999
Name of Company: PARSONS International Ltd-Philippines

Position: LEAD SR. COST ENGR.- PROJECT CONTROLS

Duties and Responsibilities: (GIZAN Military City Projects in Saudi Arabia)
* Preparation of detailed quantity take-off and costing
* Check the accuracy of quantities and unit prices.
* Develop database and preparation of unit cost derivation using Composer Gould software.
* Preparation of construction schedule

Duties and Responsibilities (PIJV Projects):
* Preparation of detailed quantity take-off and costing
* Evaluate contractor's proposal by means of checking the accuracy of quantities and unit prices and verifying the completeness of bid.
* Evaluate contractor's claim for additional work by means of verifying the validity of change order and checking accuracy of quantities and cost.
* Monitor actual cost incurred versus the approved budget.
* Coordinate with different sub-contractors and suppliers in order to secure quotations.
* Preparation of budgetary estimates for projects like ECOCENTRUM, Camp John Hay Development, Aurora Quezon Project and METRO RAIL TRANSIT Commercial Development Project.

AUGUST 1995 – APRIL 1996
Name of Company: ECOFORMWORK SYSTEMS Philippines
FORMWORKS CONTRACTOR
Position: Chief Quantity Surveyor
Duties and Responsibilities:
* Preparation of cost derivation and check quantity take-off.
* Preparation of structural analysis to determine the right section required for formwork frame and sheathing.
* Determine the right allocation of formwork systems in order to achieve the target completion date.
* Coordinate with Clients/General Contractor during negotiation.
* Provide structural computation/analysis of formwork systems whenever required by the General Contractor.
* Projects handled were Heritage Building located at Makati City, 37-Story Twin Tower located at Vito Cruz / Pasong tamo Makati City and Japanese Embassy located at Roxas Boulevard.

JULY 1992 – NOVEMBER 1995
Name of Company: DYNAMIC SYSTEMS, INC. Philippines
Position: Quantity Surveyor
AUGUST 1990 – JUNE 1992
Name of Company: LINEAR CONSTRCUTION CORP.
Position: ESTIMATOR/STAFF ENGINEER

Duties and Responsibilities:
* Preparation of detailed quantity take-off and cost derivation.
* Preparation of bar chart/schedule as part of the requirements in submitting proposals to Client.
* Preparation cost proposals specifying the construction cost, scope of work, completion period, terms of payment and other conditions.
* Evaluate and prepare billing of sub-contractors.
* Gather quotations from different suppliers and sub-contractors.
* Projects handled were 16-Storey Residential/Office Building located at C.M. Recto, Manila; M.Y. San Warehouse located at Cainta Rizal; Cinema Complex located at Rosario, Cavite and TNPC Warehouse located at Naic, Cavite.
* Preparation of material and quantity take-off, cost estimates of material, labor and equipment of various horizontal and vertical structures which include school building, roads, piping works and drainage systems.
* Preparation of bar chart/schedule as part of the requirements in submitting proposals to Client.
* Inspection of quantity and quality of construction materials used in the project.
* Gather quotations from different suppliers and sub-contractors.

------------

EDUCATION & CERTIFICATION:
------------
COLLEGE: UNIVERSITY OF SANTO TOMAS
Degree: Bachelor of Science in Civil Engineering
Location: Manila, Philippines

SECONDARY: FAR EASTERN UNIVERSITY
Location: Manila, Philippines
PHILIPPINE LICENSES:

Registered Civil Engineer: License Number – 0063271 (Rating 80.5%)

Registered Junior Geodetic Engineer: License Number – 0005187 (Rating 76%)

ADDITIONAL INFORMATION:
------------
Present VISA: Social Visit Visa- Sarawak
Place of Birth: Metro Manila, Philippines
Nationality: Filipino
Height: 5'1"
Weight: 98 lbs.
Civil Status: Married

SEMINARS:

March 02, 2001: Construction Contract Claims, Administration and Disputes
April 7-8, 2000: Use of Computers in Civil Engineering
July 16-17, 1999: Insights of the 2S of Construction Scheduling (CPM & Safety)
February 12 –13, 1999: Computer Application in Construction Estimating & Management
August 9, 1997: Sanitary and Plumbing Workshop Seminar

SPECIAL SKILLS:
* Driving
* Computer Literate
* Using MS Excel 2000 and Composer Gould for estimating
* Using MS Word 2000 for contract preparation
* Using STAAD III for structural design
* Using MS Project 2000 for scheduling
* CANDY Software for Material Take- off
* Knowledge of FIDIC Standard Regulations Requirements
* Using AUTOCADD (basic)

------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6558)

Go to Search Parameters...

Brief Description

Process Engineer

Over twelve years experience in Offshore and Onshore Oil & Gas and Marine Structure Development in National & International government projects. Project engineering management, Engineering, Design, Construction and Project cost estimation.

I was employed by ARCO Indonesia Oil & Gas since April 1980 thru March 1999. My last position was Elect/Instr Supervisor of NGL gas plant refinery located at NorthWest Java sea, for offshore facilities. My current employer is BP-Indonesia, position job as Maintenance Planner.

26 years Mechnical Design Engineering 16 years CAD experience including intensive 3D modeling 14 years product design experience. 12 years manufacturing tooling and facilities experience.

Objective: Seeking a career position with a progressive organization where my skills , training and extensive knowledge and experience can be fully utilize, while offering the opportunity for continued career growth.

BS EE from USA. I have over 14 years of experience in maintenance and projects while working with reputable organization like Exxon, Mobil, Occidental and BP Pakistan in fertilizer, petrochemical and oil/gas E&P industries.

Chemical engineer w/ experience in developing various contracts in oil, gas, water, waste treatment & soil road maintenance. Expert w/ performance based contract. Possesses good organizational, team & interpersonal skills. Adept at working & communicating across disciplines & management levels.

qa/qc engineer or inspector

I’m an international Petroleum Engineer, currently working in Turkish Petroleum Int.Co.Ltd. as a Completion/Workover Supervisor back to back Ankara/TR to Aktjubinsk/KZ, experienced about 20 years on land and offshore, in offices in many companies and projects.

To become a successful Planning Professional in a professionally managed

Twenty nine years of engineering management experience for which 24 years in the oil, gas and shipping industry -EPC projects which includes: Project management, conceptual, feasibility studies, FEED and detailed design engineering, procurement, planning, organizing, QA /QC, construction.

Nobody has climbed up through the steps of success with his hands in his pockets.

involved in installtion and commissioning of instruments, trouble shooting, helping in commissioning activites.

Piping design, PDMS modelling (design,darft ,iso draft)

6 years experience of offshore structural engineering in FEED, detailed design, fabrication, offshore installation, structural integrity asessment and decommissioning within Asia Pacific region. Hands-on in using SACS.

Seeking challenging assignments in the field of Process Engineering Design, Simulation and Commissioning with leading organisations of repute in the Petrochemical Industry that offers me opportunities to utilize my engineering skills & experiences for advancement in my career endeavours

B.E. Mechanical With Post Graduate Diploma in Piping Design, 6 Years Design Experience & Four & Half Years Experince as a Stress Analysis Engineer. Well Familiar with CAESAR II, SPR, DRV, Nozzle Pro-6, AUTOCAD 2000.

Can do electrical and instrument job and been working in oil & gas line at Sudan and Myanmar

PDMS Administration of Detail and FEED projects. Total of 6 six years of experince of which 4 years as PDMS Administrator

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

An Electrical Engineering and MBA degree holder with more than 16 years of experience in Maintenance, Operations and commissioning of Electrical facilities in Oil & Gas industries

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out