Resume - 07 years extensive experience holding a various positions in different phase of ...

Misco Jobs

Resume #70725

CONTACT INFORMATION:
View contact information...

Date of Birth: Sept. 11, 1978
Sex: Male

Health: Excellent
Occupation: Control & Instrumentation Engineering
Nationality: VietNamese
Marital Status: Single
Interest: Sport, Reading.

EDUCATION:
1996 - 2001 HaNoi University of Technology
(Intrusmentation and Industrial Informatics)
OTHER TRAINING:
Technical:
- A331 Advant Controller Configuration and Operation – Conducted in ABB Singapore
- A351 Operator Station 500 Series Configuration and operation - Conducted in ABB Singapore
- System Operation and Maintenance training for Ultrasonic meter, gas Chromatograph, Flow Computer, Coriolis Meter and HMI – Conducted by DANIEL EMERSON Singapore
- Maintenance of Electric Equipment in hazardous area
- HVAC system training cource
- Pipe Work intergrity Bolting and Jointing
- PLC Simatic S7 300, 400
- Gas Chromatograph S 500 – Daniel Singapore.
- Critical Thinking training course.
- Root cause.
- Gas Turbine – Solar
- Gas Compressor - Dressor

Other Training:
- Enviromental Awareness
- Advance First aid training
- Specialized emergency respond training.
- Basic offshore induction safety training
- Offshore lifeboat Coxswain course.

WORK EXPERIENCES:

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up, Installation, Operation and maintenance in accordance with the project and plant procedures, specifications, manufacturers recommendation with respect to HSE and Safety practices of major industrial plant over the past 6 years which are include OFFSHORE & ONSHORE Oil Gas Fix platform, Power Generation, Gas plant.
-Experienced in the installation, Site inspections and commissioning of a diverse range of Hazardous Area Instrument equipment specifically in the field of Calibration, loop check, functional logic & dynamic test, trouble shooting and failure analysis & fault rectification of process instruments, Fire/Gas, ESD system.
I. LANTAY PLATFORM ( From 2003 to present )
BP Exploration Operating Company Ltd
Job Description:
Responsibility in all field instruments as control valve, shutdown valve, blowdown valve, Temperature, Pressure, Level, Flow Transmitters and also for all switches, I do trouble shooting or plan maintenance.
Take responsibility on ICS system, Subsea and Metering system, I also take care fire & gas system.
I responsibility do planning job for discipline, manage spare part and liaise with vendor to order spare equipment.

II. NAM CON SON GAS PROJECT (July, 2002 up to Jun 2003)
SCHMIDT VIETNAM Co., LTD
Job Description:
Responsible for all of field Instrumentations, Function Test and Loop Test for all Signals from Pressure Transmitter, Temperature Transmitter, Level and Flow Transmitter, Switch …in field.
Set up and calibrations for all control valves, Solenoid valves, hydraulic valve. Installation and commissioning Fire & Gas system (Smoke detector, Heat detector, Flame detector, specially many style Gas detector.)

III. PHALAI THERMAL POWER 600 MW (May 2001 up to July 2002 )
SCHMIDT VIETNAM Co., LTD
Job Description:
Instrumentations Installations including Calibrations, Function Test and loop test of instrument equipment. Responsible for Pre and final commissioning, system commissioning scheduling,.
Checking and commission for all Motors and Transformers 6.6kV, set up for protective relay system( Motor, Breaker, Transformer and Generator).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 6511)

Go to Search Parameters...

Brief Description

GIS Professional with an excellent background in Geomatic and engineering work. GIS experience included pipeline route planning utilizing GIS/DSS, land use changes utilizing GIS/RS data, advanced RS researches using Airphotos, Hyperspectral image analysis.

Electronics / Electrical Technician

24 years in Pipeline Construction, Operation, Inspection, Precommissioning and Commissioning both Onshore and Offshore

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Please see resume for full details. Thank you

Over 26 years experience, 16 of which are with major foreign oil companies employment in specialized gas field operations which have included pre-commissioning and commissioning activities in the onshore and offshore Oil and Gas industry.

to secure a responsible position as an electrical engineer.

Chemical engineer, quality manager

BE (Electronics & Instrumentation) with over 6+ years of experience in Design Engineering, Project Planning & Execution, Commissioning Operations with well known organisations.

Presently working for Qatar Petroleum (EPIC Contracting company Galfar Almisnad), Doha Qatar as a Pipeline Project Engineer since Nov. 2007

Hardworking, self motivated geologist who has an excellent practical understanding of the oil and gas exploration industry and of wellsite geology.

I am a graduate in Mechanical Engineering with 6 years of experience as Piping Engineer.

Naval Architect with 6 years Experience of which 4 years in Indian Navy.

Iam chemist ,have working experiance in tow oil field service companies in UAE (Cementing&Acidizing) as a LAB ENGINEER and looking to get a good chance.

Working with GS Eng. & Const. Co. as Commissioning Superintendent for Ras Laffan Refinery project, QATAR.I have strong expertise in the area of pre-commissioning, Commissioning, Initial start up, stabilization of the process and operations, trouble-shooting & achieving production tgt

NDT INSPECTOR

Bachelor of Technology (B.Tech) in Electrical and Electronics, Good Knowledge of Autocad, ETAP and EDSA software

Drilling Engineer, Supervisor, Superintendent

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Presents and reports the project status to the top management.

I am expert in Mechatronics field.

As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,

I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp

GIS/CAD specialist

As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.

I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

A highly motivated, adaptable MSc graduate.

Surface well test engineer

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

More than 25 years experience in electrical field.

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI

Pipe stress engineer with eight years experience.Software Caesar II.

8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE

11years experience in the field Mechanical Maintenance of Machine shop and Foundry

Gas turbine, Boiler, Water treatment, Oil and gas operator

Condition monitoring Engineer with 7 years experience in oil and gas industry

I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).

Piping, mechanical, stress analysis, nuclear

KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27

An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields

Welding and NDT Supervisor, Lifting Equipment Inspector

Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex

Computer :

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out