Resume - As an ambitious, inquisitive, self motivated engineer, I have been working as a ...

Misco Jobs

Resume #70846

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
------------
I would like to continue my career as a workover, completion or drilling engineer in a well organized multi-national oil company in which I can make a strong contribution, travel the world and work in a multi-cultural organization.

WORK EXPERIENCE:
------------
-April 2004 – Present
-Turkish Petroleum Corporation, Batman – TURKEY
-Completion Engineer
-The job responsibilities include eliminating of the defects in oil/gas and gas/water injection wells with workover rigs; the well completion operations after drilling of a new oil/gas wells, drill stem tests and casing cementing operations during drilling; acidizing, cementing and fishing operations during workover and completion operations. Casing cementing, well completion and well testing with TCP/TTP on offshore gas wells in West Black Sea Project and rig managing in workover operations for deep shore oil wells in Kazakhstan are other experiences being held recently.

-September 2002 – June 2003
-PEKER-BARMEK Joint Venture, Sana'a - YEMEN
-Site Engineer
-Sana'a Sanitation Networks Project – Contract ( 5 )
The project was a sanitation network construction of the capital city of Yemen Republic, Sana'a. I was responsible for the relationship, correspondences between consultant and the company, preparing interim payments, gathering data from site efficiently and also whenever possibble, working at site.

-December 2001 – May 2002
-Entegre Tesisat Sistemleri L.T.D. Co., Istanbul – TURKEY
-Chief Engineer
-Responsible for the coordination of the project and construction of the natural gas pipelines. Pipeline and Reducing and Metering Station construction for T.P.A.O. and B.O.T.A.Þ.

-June 2000 – October 2001
-EVREN-KNGS Consortium, Kirklareli – TURKEY
-Site Engineer
-The Revamping/Expansion of the Existing Russia-TURKEY Natural Gas Pipeline System Phase 2
-Responsible for coordination of the welding operations that means to locate the welding teams appropriate areas and use them efficiently as possible. The relations between EVREN-KNGS Consortium Site Team and B.O.T.A.Þ. Control Organization was organized

-July 1998 – August 1998
-Internship
-T.P.A.O. Adiyaman District Management, Adiyaman – TURKEY
-Worked for Drilling department in Tokaris regionDrilling, casing, and logging operations and tools were observed

-June 1997 – July 1997
-Internship
-T.P.A.O. Research Center, Ankara – TURKEY
-Studied in enhanced oil recovery techniques, core analyses, drilling fluids, cementing, PVT and gas chromatography laboratories
------------

EDUCATION:
------------
February 2000 – December 2004
Graduate School of Petroleum and Natural Gas Engineering,
Middle East Technical University, Ankara – TURKEY
M.Sc.degree
September 1995 – July 1999
Department of Petroleum and Natural Gas Engineering,
Middle East Technical University, Ankara – TURKEY
B.Sc. degree
------------

CERTIFICATES:
------------
- Survival at sea course and certificate
- IWCF Well Control Techniques Certificate (Subsea and Surface BOP stack)
- Safety Courses for Job and Fire Fighting
- Pneumatic and hydraulic systems, bearings and valves
------------

ADDITIONAL INFORMATION:
------------
PROFESSIONAL SKILLS
Foreign Languages:
Fluent English (Spoken, Written and Translation),Conversational Arabic (Spoken)
Computer Skills:
Proficient in Windows applications, MS Office Applications (Word, Excel, Outlook and PowerPoint), Internet Applications, FORTRAN 77 and CMG IMEX 3D Reservoir Simulator

PERSONAL
Marital Status:Married (no children)
Date and place of Birth:June 25, 1976; Siran – TURKEY
Military Service:Completed
Interests:Fitness,tennis,tracking,books,music & computers

------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 6511)

Go to Search Parameters...

Brief Description

GIS Professional with an excellent background in Geomatic and engineering work. GIS experience included pipeline route planning utilizing GIS/DSS, land use changes utilizing GIS/RS data, advanced RS researches using Airphotos, Hyperspectral image analysis.

Electronics / Electrical Technician

24 years in Pipeline Construction, Operation, Inspection, Precommissioning and Commissioning both Onshore and Offshore

I am a Canadian citizen having 17 years solid building construction, Civil and structural design, quality Management, project management, construction Management. a dedicated team player/leader exhibiting a high level of energy and initiative under pressure.

Please see resume for full details. Thank you

Over 26 years experience, 16 of which are with major foreign oil companies employment in specialized gas field operations which have included pre-commissioning and commissioning activities in the onshore and offshore Oil and Gas industry.

to secure a responsible position as an electrical engineer.

Chemical engineer, quality manager

BE (Electronics & Instrumentation) with over 6+ years of experience in Design Engineering, Project Planning & Execution, Commissioning Operations with well known organisations.

Presently working for Qatar Petroleum (EPIC Contracting company Galfar Almisnad), Doha Qatar as a Pipeline Project Engineer since Nov. 2007

Hardworking, self motivated geologist who has an excellent practical understanding of the oil and gas exploration industry and of wellsite geology.

I am a graduate in Mechanical Engineering with 6 years of experience as Piping Engineer.

Naval Architect with 6 years Experience of which 4 years in Indian Navy.

Iam chemist ,have working experiance in tow oil field service companies in UAE (Cementing&Acidizing) as a LAB ENGINEER and looking to get a good chance.

Working with GS Eng. & Const. Co. as Commissioning Superintendent for Ras Laffan Refinery project, QATAR.I have strong expertise in the area of pre-commissioning, Commissioning, Initial start up, stabilization of the process and operations, trouble-shooting & achieving production tgt

NDT INSPECTOR

Bachelor of Technology (B.Tech) in Electrical and Electronics, Good Knowledge of Autocad, ETAP and EDSA software

Drilling Engineer, Supervisor, Superintendent

15 years of utility/specialty chemical management experience.

. I have strong leadership skills and proven ability to manage and motivate a team to achieve assigned results. Through my previous jobs, I have learnt to provide and maintain consistent high standards and service.

Presents and reports the project status to the top management.

I am expert in Mechatronics field.

As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

07 years extensive experience holding a various positions in different phase of the projects in the field of Instrument Pre-commissioning, commissioning, start up,

I am a Mechanical Engineer and have more than 6 Years Experience in Piping Design and Stress Analysis Engineering. I have worked with CAESAR II software in developing Piping Stress Analysis and I also have substantial experience in the design of interactive CAD software; Moreover, my job involves sp

GIS/CAD specialist

As Cathodic Protection Engineer in Power Plant / Oil & Gas Industries with about 7 years experience; having knowledge on diverse Construction/Engineering Design /Commissioning/Maintenance activities with extensive experience on Cathodic Protection with NACE Level II certification.

I am searching for a job as a pipping stress and supporting engineer in KL, Malasia and I am expert in using CAESAR II and PDMS and ANSYS soft ware

Mechanical / Electrical experience in Boilers, pumps, HVAC Systems, Compressors, steam systems and ancillary services, DHW skids, Chillers, Cooling Towers, Clean steam Boilers, Purified Water Systems, waste water, Low voltage Electrical Systems, Preventive Maintenance Systems.

A highly motivated, adaptable MSc graduate.

Surface well test engineer

Structural Designer With 9Yrs. PDS,Microstation & Autocad Experience

More than 25 years experience in electrical field.

I am a Piping Engineer experienced in Piping Stress analysis, Complete Piping engineering activities, PDS expertise. I believe that my enclosed resume will demonstrate that I have the characteristics and experience you seek.

Over 14 yr of experience in dealing with Automation, Instrumentation & control systems. 11 years in Project Sales. Working experience with Honeywell & Yokogawa. Presently, located at Doha, Qatar, working with Automation/IT Company.Handling DCS, PLC, FGD System,Field Instruments.

An Electrical Engineer with over 12 years of hands-on experience in Maintenance of Assets and Utilities in a Gas based Petrochemical plant and Integrated Steel Plant with Rich Managerial and technical capabilities in Installation/Commissioning and Upkeep of Electrical Equipments.

AWS, CSWIP 3.1 AND ASNT LEVEL II IN RT,UT,MPI & DPI

Pipe stress engineer with eight years experience.Software Caesar II.

8 + years Oil & Gas field experience in Instrumentation and Control engineering. Lastly Worked as Assistant Resident Engineer for Tyco Fire & Security, UAE

11years experience in the field Mechanical Maintenance of Machine shop and Foundry

Gas turbine, Boiler, Water treatment, Oil and gas operator

Condition monitoring Engineer with 7 years experience in oil and gas industry

I have been involved with many projects throughout these regions, from Heavy Construction, Platform Installation and Inspection IRM programs.Also I have more than 3 years experience in NDT/Welding Inspector in various project. I just recently pass my Subsea Insp. Controller CSWIP 3.4U(TWI-UK).

Piping, mechanical, stress analysis, nuclear

KNPC & KOC approved planning engineer for EPC projects,Involved in Planning and coordination for the KNPC GRTA- 2006 shutdownInvolved in Planning of Major Shutdown for KOC -GC 27

An experienced metocean engineer/hydrographic surveyor/GIS technician/coastal engineer seeking suitable positions in related fields

Welding and NDT Supervisor, Lifting Equipment Inspector

Subsea Pipeline & Riser Installation engineering with Offpipe or Orcina Software(Orca Lay, Orca Flex

Computer :

My expertise includes strong hands-on technical skills with ECLIPSE and MBAL software applications. I am highly skilled in EOS fluid characterization, well test analysis, reservoir modelling, manage mature reservoirs, well monitoring

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out