Resume - Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump s...

Misco Jobs

Resume #71243

CONTACT INFORMATION:
View contact information...

JOB OBJECTIVE

To become a part of a dynamic Organization that offers opportunities for challenge and advancement where I can utilize my potential and talents to their best, as a Process / Petroleum Engineer.

TECHNICAL SKILLS

* A process engineer with 5 years experience in EPC environment
* Effective communication skills and ability to quickly adapt to new project requirements
* Front-end and detailed process design and plant commissioning
* Developed and reviewed PFDs & P&IDs
* Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.
* Equipment data sheet preparation
* Utilized HYSYS simulation models for review cases of gas processing projects
* Performed calculations for pressure relief systems (PSV), process calculations including separator sizing, dehydration and pressure drop calculations
* Proficient in other engineering software including MS Office (Word/Excel/Power Point/Project)
* Effective team player with ability to work independently with minimal supervision

PROFESSIONAL EXPERIENCE
XELIN Engineering (Pvt.) Ltd. January 2000 to June 2005

Process Engineer: Xelin is an EPC company serving the oil and gas sector locally as well as internationally.

Client: OGDC-Gas dehydration calculation for a 15 MMscfd gas facility which includes contactor design, TEG circulation rate, Reboiler duty and selection of reflux pump

Responsibilities:

* Front End and Detail Engineering of Chashma expansion project
* PID & PFD development
* Basic and detailed engineering
* Line sizing and hydraulics
* Process equipment sizing and associated data sheet preparation
* Gas dehydration calculations
* Safety Relief system

Client: Junathi South Remote facility: A 30 MMSCFD gas remote facility hooked up with main Makobaja gas gathering system.

Responsibilities:

* Process studies for the gas processing plant
* Gas processing and gas gathering system hydraulics and line sizing.
* Development of gas processing and gas gathering models in HYSYS
* Material balances, PFD and P&ID Development
* Equipment sizing e.g. separators, pumps, compressors and data sheet preparation

Client: Ghunghro oil facility upgrade: An upgrade of salt-water disposal system to 31,000 BWPD

Responsibilities:
* Developed PFD and P&ID
* Sized and selected control valve and PSV
* Development of PFDs and P&IDs
* Preparation of equipment data sheets
* PSV and control valves sizing
* Pumps selection & hydraulics
Bodycote, Norwest Laboratory Calgary, Alberta 2007 to Present
(Lab Technologist)
Conventional Analysis
* Test samples for Porosity and permeability (Horizontal and Vertical Permeability) using Porosimeter and permeameter and Client's needs about testing at different depths.
Unconventional Analysis
* Test of Unconventional Samples for grain density, bulk density, pore volume, porosity, vertical permeability (kv), horizontal permeability (k90) & (kmax) by using Porosimeter and Permeameter
* To run Gamma Log on the samples to determine the concentration of the significant radioactive materials and the information lithology
AGAT Laboratories, Calgary, Alberta
(Lab Technician) 2007
* To ensure correct orientation of the incoming core samples.
* To run Gamma Log on the samples to determine the concentration of the significant radioactive materials and the information lithology.
* To prepare the required core samples and analyze them for physical properties such as porosity, permeability and fluid saturation.
* Chopping, slabbing, Sampling, V-Notching and boxing of cores as per regulations.
* To generate final reports and to present them to clients.
EDUCATION:
Bachelor of Applied Technology Petroleum Engineering 2006
Southern Alberta Institute of Technology (SAIT) Calgary.
Cumulative GPA = 3.70 / 4.0
Relevant Courses
 Advanced Reservoir Engineering  Reservoir Simulation Drilling Technology
 Petroleum Geology of WCSB  Well logging  HYSYS & PIPESYS
 Gas Processing  Project Management  Production Operations
Projects
* Reservoir Engineering Simulation Project on Water Flooding using Compositional Modeling (GEM).
* Project (in HYSYS) On "Optimizing Gas Plant" using "NGL Fractionation Train", "Gas Processing", "Sweetening" and "Dehydration" of Raw Gas.

Natural Gas Process Technology Course (ENCH 609) 2007
(University of Calgary)
Topics covered in Natural Gas Process Technology Course (ENCH-609)
Separator Sizing Gas Sweetening Absorber and Regenerator Operation
Dehydration Ethane Recovery and Fractionation
Sulphur Recovery Acid Gas Injection
Cryogenic Systems Control, Flare Systems, Utilities

* Bachelor of Engineering (Chemical Engineering) 1999
NED University of Engineering & Technology, Karachi, Pakistan
PROFESSIONAL MEMBERSHIP
Member of Pakistan Engineering Council (PEC)

REFERENCES Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6411)

Go to Search Parameters...

Brief Description

Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems

Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard

2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor

I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.

qualiy inspection

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.

Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.

Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.

TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Master of Science in Petroleum Egineering , Bachelor of Engineering in Petroleum Engineering

CAPABILITY THERE BY CONSIDERING THE QUALITY IMPLICATIONS OF ALL WORKS UNDERTAKEN BY RECOMMENDING ACTIONS RESPECT TO THE PROJECT SCHEDULE AND ACCEPTANCE ENGINEERING PRACTICE THERE BY MAINTAINING UNINTERRUPTED PRODUCTION WITH QUALITY AND STANDARD

Procurement & Supply Chain

A position of dynamic and energetic person to work as a "Process Engineer" with growth, potential and challenging environment to utilize my strong interpersonal abilities and technical skills for achievement of organization wellbeing.

Seismic Acquisition design and Seismic Acquisition Field Supervisor.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out