Resume - Process engineer . Results oriented Professional Engineer with 11+ years experie...

Misco Jobs

Resume #71249

CONTACT INFORMATION:
View contact information...

Work Experiences (from the end to the beginning)

1. From NOVEMBER 2007 to present
Company: CHAGALESH CONSULTING ENG.
Project: TABRIZ GAS COMPRESSOR STATION DEVELOPMENT /BASIC ENGINEERING STUDY FOR UNIT PRODUCTION OF HENGAM ISLAND
POSITION HELD: Process engineer (Executive)
DUTIES OF POSITION:

* Basic Engineering & Detail Engineering activity
* Basic proposal, Preparation of data sheet, P&ID Preparation, Utility header diagram preparation, engineering preparation.
* Hydraulic calculation for the Pump, Compressor Circuits, Line Sizing for the Single and Two- Phase Flow using Equivalent Length and K-Value method.
* Preparation of Instrument Data sheet.
* P&ID Updating.
* Development of Utility Header Diagrams based on actual equipment layout and optimization of utility header sizes.
* Preparation of Control Valve Data sheet.
* Preparation of PSV Data sheet.
* Preparation of Equipment List, Line list, Catalyst/Chemical summary.
* ……………

2. From JULY 2005 to NOVEMBER 2007
Company: Agip Iran BV
Project: Darquain oil filed development
POSITION HELD: Process Eng. /Process & OJT instructor
DUTIES OF POSITION:

* Preparing training modules (underpinning knowledge) on process subjects for the Competency Based Training program with reference to ENI Occupational Skill Standard for process technicians.
* Development of assessment and Training modules, which includes assessment checklist, Knowledge and Performance assessment papers.
* Record all questions and answers, which are used for the purpose of assessing, further training requirements and range of standards.
* Identify competency gaps. Plan & implement the training (OFF job or ON job, as required) to bridge the competency gaps.
* Train and assess the Operators (Process, Utility & well head service) on selected operational Tasks. (Multi-tasking training & Assessment program for Operators)
* Cooperation with vendor trainers in their courses

* To provide power point presentation about relevant courses such as:

1. Basic concept of physics and chemistry.
2. Applied thermodynamic to oil and gas processing.
3. Crude oil stabilization and sweetening.
4. Basic concept of heat transfer.
5. Pressure Vessels.
6. Vessel internals (tray & packed for towers, (coalescer, swirl deck, mist eliminator, inlet diffuser for two &three phase separators)).
7. Gas compression (flash gas com. (M.A.N. co.), (re-injection com. (NUOVO PIGNONE comp., Pd= 520 bar)).
8. Oil dehydration unit (emulsion crude desalting).
9. Oil metering system (ALDERLEY co.).
10. SIS systems (ESD, BMS, HIPPS, F&G).
11. Process Safety and Process Control
12. Process safety procedures and emergency shutdown.
13. Wellhead control panel (CAMERON co.).
14. Crude oil stabilizer column control.
15. Produced water treatment system.
16. Utility systems (instrumented air compressor, N2 plant, and R.O. system& fuel gas package).
17. Process heaters (VERGA co. & LINDE co.).
18. Plant emergency segregation and isolation philosophy.
19. Centrifugal compressor control.
20. Dry gas sealing system for centrifugal compressors.
21. Lube oil system for centrifugal compressor.
22. Gas dehydration package by TEG & glycol regeneration package by gas stripper.
23. Gas hydrates formation & inhibition technologies.
24. Refrigeration package (PROSERNAT co.).
25. Pigging art.
26. Shell & tube heat exchanger ( according to TEMA standards)
27. pressure relief valves, design, rating & operation(according to API 520,521RP)
28. Flare system
29. storage tanks (according to API standards)
30. Venting Atmospheric and Low-Pressure Storage Tanks(according to API2000)
31. Cause and effect charts.
32. Control room operation.
33. To perform on the job training courses on site.

* Explain of the following documents during 4 months which has written by to trainees: - startup gas gathering units (flash gas compressor, refrigeration package, and gas dehydration package) and compressor sequence.
* Cooperate with ENI process Eng. Department for review of stage 2 Darquain Oil Field Development P&ID's.
* Monitored process systems behavior for adverse trends to allow fast response to potential threats.
* Provided process & operational inputs into the technical safety & operability reviews, training operators, maintenance activities, and performance test-runs.
* Assisted process engineer in technical monitoring and troubleshooting of the Utility systems.

2. From May2004 to JULY 2005

Company: Agip Iran BV
Project: South Pars Gas Treatment Plant Phases 4 & 5
Position: Process plant supervisor
INCLUDED DUTIES:
INCHARGE OF:
1. Condensate stabilization unit (which is included off gas NUOVO PIGNONE compressor capacity 3 MW / stage)
2. Gas dehydration & mercury guard unit (which includes dryer regeneration gas compressor by ATLAS COP co., capacity = 14MW).
3. Propane refrigeration cycle (which is included ELIOUT EBBARA propane gas compressor, capacity = 17MW).
4. Ethane recovery unit (which includes gas turbo expander by ATLAS COP co.).
5. Gas sweetening unit ( which is used MDEA )
6. NGL fractionation unit
7. Glycol regeneration and injection unit (which is used MEG glycol).
8. Caustic regeneration unit.
9. Propane sweetening unit with soda ash.
10. Fully familiar with CENTUM CS3000 R3 (YOCOGAWA DCS system)

3. From: 1999 to: May,2004

Company: SARKHOON & QESHM GAS REFINARY.
Position: Process plant day Supervisor/Process Eng.
In charge of:
1. Inlet separator & slug catcher unit
2. Glycol regeneration unit ( which is used for TEG )
3. Refrigeration unit ( which includes ELIOUT propane compressor capacity= 12KW
4. NGL stabilization unit
5. NGL storage & LPG spherical tanks
6. N2 generator package ( by PSA unit )
7. Water treatment unit ( by membrane technology)
8. New employee training for DCS ( APAC+ R4) /
9. To verify daily operation data

10. To implement operational changes in case of process upsets.

11. To execute simulation of depropanizer tower with research center of petroleum industries.

From: 1997 to: 1999

Company: Pak Ahjand Joonoob Co
Project: Steel Industries Co Ahwaz
Position: Senior supervisor of Direct Regeneration unit no.1
DUTIES OF POSITION:
-CONSTRUCTION & Commissioning and Start Up of reformer
- CONSTRUCTION & Commissioning and Start Up of steel furnace

Training courses

- Principles of membrane technology
- Supervisory skills
- Internal quality audit based on requirement of ISO9000 – 2000 series (RWTUV)
- Internal environmental audit training in accordance with ISO-14000series(RWTUV)
- Internal quality audit based on requirement of OHSAS18001: 1999(RWTUV)
- Statistical process control (S.P.C)
- Failure mode & effect analysis (FMEA)
- Safe handling of light Ends
- Furnace operation
- Principles of cooling towers design
- Raston TB-4000 ( gas turbine )
- Simulation of Gas Processing with hysys soft ware ( advanced course)
- An Overview of LNG Production
- Automation systems with WINCC software
- Water in hydrocarbon liquids (as vendor trainer assistant By IMA co.)
- Mechanical seal for centrifugal pumps (as vendor trainer assistant By KSB co.)
- Fired heaters (By Vergaengineering sri o.)
Special Training:

Industrial Training

- N.G.L. 900 /1000 -1990
- N.G.L. 700 & 800 -1991
- GAS STATION UNIT 4 ( AHWAZ ) -1992
- KANGAN GAS REFINERY - 2000
- BANDAR ABBAS PETROLEUM REFINERY -2001
- ABADAN PETROCHEMICAL COMPLEX -þþ2002

Education

Graduated Year: 1994
Major: Chemical engineering
Degree: B.Sc
Branch: Gas refining field
University: AZAD university of Gatchsaran

Language:
Persian
English

Software:
- Office ( word – Excel – Access – power point )
- Most process eng. Soft wares such as:
Hysys
Pro II
ASPEN B-JAC
Math cad
Flarenet

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 6558)

Go to Search Parameters...

Brief Description

I am a Mechanical engineer with 20 years experiences in design of all kinds of piping & fixed equipment design & stress analysis work. I used softwares like CODECALC, CEASER, PVELITE, partly STAAD & ALGOR. My experiences are in oil and gas, power, onshore as well as offshore.

I have a total of 23 years experience as a Reservoir Management and Reservoir Simulation Engineer. I have worked in UK, North Africa and the Middle East on carbonate reservoirs.

Work experience involved twenty-five years as a petroleum engineer for fossil energy, coalbed methane recovery, and environmental remediation. Major projects involved insitu combustion, steam flooding, carbon dioxide injection and polymer flooding.

Petroleum / Drilling Engineer: - 30 years experience as a Petroleum Engineer, with 9 years in the U.S. and 21 years international. Of this total, 22 years has been in drilling, completions and workovers, 8 years in production.

Oil field engineering and supervision specialist with responsibility for management, supervision and evaluation of drilling and production operations.

I have experience in oil/gas/power plant as Supervisor-Mech&Trainer Mech

I am seeking an entry level position, I have experience has a technician but not in the oil industry.

Chemical process engineer, oil/gas, refinery, gas processing, production, operation, process engineering, commissioning, test run, performance guarantee run, HAZOP STUDIES, simulation, energy audit, energy conservation, PFD and PID review,

A professional development on modernizing engineering projects

American with experience in Production-downhole & surface, Management, Completions, Facilities Design & Construction and Workover Engineering with major Oil Companies both domestic and international for the past 25 years.

I have served as a Project Manager, Estimator/Scheduler and Senior Piping Designer in the Petro-Chemical Industry. I have a varied background from technical, maintenance, construction, engineering, and management perspectives.

Drilling Manager / Superintendent / Engineer with extensive, broad based, worldwide experience in drilling operations, including deepwater drilling and remote locations.

A Field Operations / Production Engineering Manager with wide experience in oil and gas production projects. Has excellent skills in production technology / artificial lift / potential EOR screening / scheduling and management of oil and gas upstream & downstream engineering projects.

Extensive experience as a project engineer, piping engineer, engineering manager and project manager for design and construction of gas plants, refineries, cogeneration plants, LNG plants, cross-country pipelines, LPG storage and loading facilities.

Worked on many projects internationally in the Electrical and Instrumentation fields as Technician, Supervisor and Superintendent.

Petroleum engineer with 25 years of energy industry experience. Strong quantitative and analytical skills. Experience includes acquisitions, management, reservoir analysis, economic evaluations, exploration, production and natural gas pipelines. Prefer to stay in Dallas-Fort Worth area or Houston.

31 years experience as Drilling/Workover Superintendent, Drilling Supervisor and Snr Drilling Engineer. B Sc ME. Horizontal, directional, high pressure, high H2S, onshore and offshore (platform and jackup)wells. Worked in Russia, Kenya, Greece, Pakistan, Libya and Algeria.

I am seeking an exploration or a trend development geologist position where I can find reserves for a company by generating well documented low risk prospects and add significant value by identification of additional opportunities on existing acreage.

Professional career as an engineer, consultant, and manager in the petroleum and petrochemical industries in the United States and Overseas. Experience has ranged from process design, techno-economic studies, and corporate planning to managing companies involved in refining, marketing, and trading.

drilling Engineer or drilling manager

Summary: I have extensive knowledge in: Cost Analysis, Scheduling, Management, Negotiations, Proposals/RFI/RFQ, Team Leadership, Supervisor, Project Lead, Workshop Development, Document Control, Technical Lead, Technical Writer/Proposal/Reports Writer, Training

To become associated with an integrated international oil and gas company in a managerial or senior staff position in Exploration and/or Operations Geology.

Mechanical process engineer with design, engineering, and operations experience in power, oil and gas and petrochemical.

Twenty-two years experience in production, reservoir and evaluation engineering of both major and independent oil companies. Areas of experience include Rocky Mountain, Mid-continent, West Texas, Gulf Coast, Argentina, and Venezuela.

Managed and implemented product, equipment, and process design/modifications in manufacturing and engineering including new product introductions.

I am a Mechanical Engineer with extensive experience in project management, terminal facilities, pipeline design, construction, operations, maintenance and onshore/offshore equipment specifications.

OBJECTIVE A Production engineer/Technologist with 20 year’s experience in the oil industry in Nigeria and the Netherlands.

Sole Proprietor of Bass Energy Company, a consulting firm specializing in drilling, operations and producing property acquisitions. Available for domestic and international assignments.

Summary Job Description: Senior Petroleum/Production/Reservoir Engineer specializing in: Field / Well Performance and Analysis Production Monitoring and Enhancement Cost Reduction and Optimization Team Management

20 years in Civil Finishing works / Insulation as Per CINI /Waterproofing/Anticorrosive Treatment/Painting as per ERS.

17 Years experience as a well log analyst. Contract handling, work over planning, production logging interpretation, management services, asset management ect.

Dear Employers, Through my resume you could evaluate my qualifications and experience in the field of ELECTRICAL & ELECTRONIC ENGINEERING – installation, maintenance and repair of different types of equipment.

I am a mechanical engineer. At Present days, I am working at PT. EXSPAN NUSANTARA as Production and Facility Engineer. My main responsibilities are handling crude oil production and optimization and designing and optimizing facilities.

25+ years experience - Gulf of Mexico, California, Alaska, and International. Fast working, self-starting, and dependable. Team player or individual contributor. Computer experience includes Landmark SeisWorks, Z-Map+, StratWorks, EarthCube, Geosoft "Montaj", and Stratimagic.

I have been working in the Petrochemical and Refining area since 1982 up to date from the level of control & optimization engineering up to Consultant level going through Management and Advisor positions. Open for opportunities overseas. Available September 2004 for new challenges.

Although its cyclical nature has separated me from the oil and gas industry for several years, the new amenable political climate has restored my excitement at the prospect of applying my expertise to new and challenging projects and I believe that my education and experience aptly prepares me.

Static Equipment Engineer

Job Application

Registered mechanical engineer with expertise in Plant Design and Piping

Process engineer . Results oriented Professional Engineer with 11+ years experience in oil & gas in multi positions design/supervisory/instructorMulti-disciplined versatility with superb trouble-shooting and analytical skills to assess problems and provide expert on-site reliability solutions .

Pipeline-Mechanical-Engineer

Experience of Ammonia / Urea Operations and process engineering

QHSE Supervisor/ HSE Supervisor/ H2S Specialist

14 years of national and international experience in onshore/offshore feasibility studies, process simulations, detailed process design, project execution, cost estimating, proposal preparation, project management, operations, plant performance tests, and quality control.

Electrical/Instrumentation Technician, Offshore/Onshore Oil Gas and Marine

Primavera P3, MS Project, Communication skills, management capability

•Expertise in ESP design, installation, operating, monitoring, optimization, diagnosing and trouble-shooting, •Production Operation and Technology application, •Team leader and supervisory role for production engineering teame, •Good communication skills

I am an experienced Marine Engineer with CHIEF ENGINEERS CERTIFICATE OF COMPETENCY & having a service experience of about Ten Years of which last Four Years in companys top level management,with extensive technical expertise in handling the repair and maintenance works of a wide spectrum of machine

A 32-year-old Married Algerian Citizen, Graduate Telecoms Engineer specialized in wireless, and SCADA Systems with an experience in providing desktop, network and communications support. Excellent team working abilities and a high degree of flexibility.

Degree Mechanical Engineer - Piping Design

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out