Resume - QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

Misco Jobs

Resume #71349

CONTACT INFORMATION:
View contact information...

APPLICATION FOR THE POST OF INSTRUMENT/CONTROL SUPERVISOR: -

I would like to apply for the post of instrument supervisor in your company. i have total of 20 years experience in the instrumentation and control system maintenance in the oil & gas industry and other industries, i have worked with instruments commissioning, in plant modifications, calibrations, preventive maintenance and trouble shooting and well experienced with bailey distributed control system, plc's, pnuematic & hydraulic operated systems and thorough component level knowledge in the electronic circuits. electronic controlled electrical equipements trouble shooting. presently i am working as an acting instrument/control supervisor at ruwais refinery (takreer). i have attached my complete cv for your consideration.

DETAILS OF WORK EXPERIENCE:-
* Daily job planning, preparation of failure reports. Coordination with planning to carryout job efficiently and safely. Conducting safety talks. Coordination with other sections.
* Maintenance of spare parts inventory in the stores(CMMMS)
* Technical support to instrument technicians to carryout job efficiently and safely.
* Maintaining spare parts availability in the store, prepare new spare parts specifications for ordering.
* New plant expansion projects support,
* Carryout in plant modifications, prepare drawings and others documents,
* Bailey DCS system (INFI-90 and Harmony systems) maintenance and trouble shooting (MFP, HAC, smart I/O modules, I/O modules, communication modules, power supply systems etc) and assisting Automation section in function block diagram modifications (FBD).
* Bently Nevada vibration monitoring 3500 series maintenance and trouble shooting
* Allen Bradely PLC maintenance, trouble shooting and ladder logic modifications.
* Siemens PLC S7 programming and maintenance
* Motor operated valves Biffi, Rotork, Neuvopignone, Auma, maintenance and trouble shooting. Attending faults in the Rotork pakscan system
* PID control equipments tuning and maintenance & trouble shooting of control valves & positioners (including smart type positioners).
* Fire and Gas systems maintenance and trouble shooting plc controlled.
* Various types of hydraulic operated units maintenance and trouble shooting (rexroth, grove, flexider)
* Experience in the pneumatic equipments and its controls
* Enraf level gauging system maintenance and trouble shooting
* Maintenance and calibration of process instruments level, flow, pressure, temperature, speed, vibration etc, made by Yokogawa, Honeywell, Foxboro, Allen bradely, Rosemount, Kent, Bailey, Itt burton, P+f, E+h, Schenck Enersul etc.
* Fault finding of electronic circuits and its repairing.
* Trouble shooting of relay logics
* Trouble shooting of weigh scales and weigh bridges
* TROUBLE SHOOTING OF ELECTRONIC CONTROLLED ELECTRICAL EQUIPEMENTS LIKE VFD, UPS etc.

10. PROJECTS COMMISSIONED:-
* Refinery jetty expansion project with 'NPCC'
* Bailey DCS infi-90 up gradation project
* Sulpher plant expansion project with SK engineering (Bailey symphony)
*
11. TRAINING COURCES ATTENDED:-

„X Bailey DCS course, symphony / harmony DCS maintenance course.
„X DCS system composer automation architect
„X Allen Bradely PLC maintenance and trouble shooting course.
„X Pakscan 2 wire control system by Rotork controls ltd
„X Biffi motor operated valves training
„X Enraf level gauging system
„X Fist aid course
„X Safety passport course
„X Fire fighting courses
„X Trouble shooting and maintenance of pumps & compressors

12. ADDITIONAL KNOWLEDGE/INFORMATION:-
* Microsoft office,
* Maximo (CMMMS)
* Component level repairing of test instruments.
* Hydraulic operated systems trouble shooting.
* Knowledge of electrical operated equipments like variable frequency drive

PRESENTLY WORKING AT RUWAIS REFINING COMPANY (TAKREER, ADNOC) AS AN ACTING CONTROL SUPERVISOR SINCE AUGUST 1996

Job description:- carryout instrumentation maintenance, installation, calibration, testing and trouble shooting, preventive maintenance, job planning, project commissioning and coordination, technical assistance to technicians, carryout in house plant modifications, preparing drawings and documents, coordinate with automation section for fault finding and failure diagnosis at DCS system, carryout in-house ladder logic modifications at PLC's, monitoring and analyzing Bently Nevada vibration monitoring system, analyze repeated instrument failures and provide suggestions to avoid future recurrence, attending hydraulic operated systems failures and solutions. Pneumatic control valves tuning. Ensures work is carried out in a safe and efficient manner to established standards. Management of spare parts inventory in the stores. Have experience of working using permit to work systems.

WORKED AS AN INSTRUMENT TECHNICIAN FROM 1994 TO 1996 WITH EUROMECHANICAL SUPPLIED TO RUWAIS REFINING COMPANY (TAKREER)

JOB DESCRIPTION:-
Instruments break down maintenance, preventive maintenance, calibration, testing, trouble shooting, maintenance of hydraulic systems for ship loading units, maintenance of bailey DCS system, Bently Nevada vibration monitoring, Enraf level measuring, MOV and other plant instruments maintenance etc.

WORKED AS AN INSTRUMENT TECHNICIAN AT QATAR ELECTRICITY AND WATER, QATAR FROM 1991 TO 1992.

JOB DESCRIPTION:-
Break down and preventive maintenance of plant instruments, relay logic circuits, control valves at desalination and other auxiliary plants.

WORKED AS A JUNIOR TECHNICAL ASSISTANT AT BOMBAY PORT TRUST 1991 (INDIAN GOVERNMENT COMPANY)

JOB DESCRIPTION:-
Supervising the instrumentation job in the ships (dry dock) and heavy material handling units (like heavy overhead cranes) maintenance and trouble shooting.

WORKED AS QUALITY CONTROL INSPECTOR, AIRCRAFT INSTRUMENTATION AT AIRCRAFT MANUFACTURING INDUSTRY HINDUSTAN AERONAUTICS LIMITED FROM 1987 TO 1991 ( INDIA GOVERNMENT COMPANY)

JOB DESCRIPTION:-
Worked as a quality control inspector at aircraft instrumentation section. Inspect/test 'MIG' series fighter aircraft instruments and carryout inspection of ground test equipments. Coordination with planners and designers to implement in house modifications.

WORKED AS A JUNIOR ENGINEER WITH SIVANANDA ELECTRONICS, NASIK, INDIA FROM 1984 TO 1987

JOB DESCRIPTION:- Electronic test instruments calibration, testing, repairing, and servicing, implementing modification of electronic circuits. Test instruments demonstration to the electronic component and cable manufacturing industries (like capacitor testers, resistance testers, metal detectors, transformer oil testers, cable insulation resistance testers etc). Collecting the feedback from the industries to develop and improve our instruments.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 551 to 600 of 6519)

Go to Search Parameters...

Brief Description

About twenty (20) years of diverse working experience in various fields, out of which Ten years in the Oil & Gas sector of Middle East. Worked for Projects for Agip KCO, ADCO, Dolphin, Aramco, Sceco Etc.

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

A highly adaptable and meticulous Rotating Equipment Engineer with hands on experience on Centrifugal and reciprocating compressors, Steam turbines, Gas turbine, Pumps, Agitators, Fans and Blowers, Mechanical seals, Gas seals and Vibration analysis.

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

Experienced Biostratigrapher /Stratigrapher with more than two decades of experience in Petroleum Exploration in all important Sedimentary Basins of India. Experience in leading sponsored and research projects related to oil exploration

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

I have experience in design of ALS (pcp, rod pump, esp, plunger lift) and their software (S-rod, PC-Pump, Prosper) completion systems, pipe lines, production plant, Sofwares like DSS, Open Wells, Sahara, M-Bal, Prosper, Visio, Merak Peep. I have too experience as coordinator in tool contracts.

2D, 3D (Land/TZ/Marine) both on-site QC and full Data processing and Operation Design

Electrical Engineer with 14 years of hands-on experience in the various fields of engineering assignments, such as; project management & supervision, construction & maintenance, quality control & inspection, testing & commissioning works, most of which were undertaken in the venue of oil & gas,

Piping PDS PDMS

Job Skills:Good verbal and written communication skills Physically fit to do the work required, have no a fear of heights or confined spacesA positive attitude, high tolerance for job pressure and long hours, including to be on call 24 hours a day, 7 days a week and on weekends and/or holiday if nee

PDS PDMS Plant Layout Piping Material Specification

Reservoir Engineer with over ten years experience in reservoir modeling, simulation, history matching, well testing, material balance, decline and nodal analyses for carbonate/clastic oil and gas reservoir development.

Area of Expertise: Familiar with trouble shooting and prevention of occurrence of breakdowns by interpretation of operational data, through analytical approach. Having expertise on engines, auxiliaries And Heavy Engineering Machinery(Auto workshop),Commissioning experience in Jack up and deep drill

Worked with electrical substation, transformers, circuit breaker, relays and other equipments

I am Sr Pipe stress engineer and currently working at Ranhill Worleyparsons at malaysia

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Seconded to Reservoir Characterisation Department for specific modelling projects including static Uncertainty Analysis & Field Development Asset Teams. Full Field static modelling using multiple techologies. Entire geocellular modelling workflow including lithology & depositional facies.

Contracts Engineer with 14 years experience in offshore & onshore Oil &Gas proects with very good command in English.

Candidate for Junior drilling supervisor & a14 yearsExperience Mud Eng.specialist.

Based on my educational background, I am analytical and pay attention to details. I have done experimental work both for my graduate and and post graduate studies which enables me to have a better understanding of the real world problem solving abilities while I have practical and research backgrou

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

I have over 15 years hands on experience in Oil, Gas and petrochemical plants.

15 years experience in INSPECTION OF OIL AND GAS RELATED JOBS

I am a Instrument Engineer with more than 15 years of experience ( about 12 years in Oil & Gas and 3 years in Chemical / Petrochemical projects) in the field of Instrumentation Design & Project engineering for Petrochemical, Refinery, Oil and Gas projects as per Aramco and international standards

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

110KV/11KV substation equipments like Isolators, Circuit Breakers, Current transformers, Potential transformer, Lightning arresters, Neutral Grounding Resisters & Battery charger, etc.

Chemical engineer OCP MCAD

I am a civil engineer who has been working in the middle east for the past sixteen years. With a total of eighteen years of professional working experience, of which thirteen years were in the oil/gas and petrochemical projects construction as a civil construction engineer, civil QA/QC engineer.

DCS/PLC Engineer in Control System Engineering

- seeking reservoir engineering consulting work - 19 years in oil and gas industry - reservoir modeling - well test analysis - petrophysics - production optimization - development planning

Petrophysicist Formation evaluation, Production log processing and interpretation, Geologist- Basin Modelling, LWD, MWD, mud logging, Geological interpretation of well logs, data management, Production geology. Interpretation and evaluation of well logs ranging from exploration to production and rea

Experience of over 20 years to serve you to the best of my ability without any supervision.i have HND in electrical engin. and Diploma in Computer technology from recognised university from my country.I have worked in different fields including UN mission .

QUALIFICATION :- DIPLOMA IN ELECTRICAL ENGINEERING WITH FIRST CLASS

Degree in electronic engineering in the next December, however now I am electronic technologic with 14 years of experience in the petroleum industry

First 1 2 3 4 5 6 7 8 9 10 11 [ 12 ] 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out