Resume - AutoCAD, Office, CFD (Computational Fluid Dynamic), Basic Electric, Mechanical a...

Misco Jobs

Resume #71381

CONTACT INFORMATION:
View contact information...

------------
OBJECTIVE:
------------
To give my best outcome to your company
------------
WORK EXPERIENCE:
------------
2007 ¨C now PT. MacGREGOR Plimsoll Indonesia Jakarta
Crane and Winch machinery for Offshore and Marine
Service Engineer
In field remove/Install and troubleshoots products/equipment.
Identifies, analyzes, and repairs product/equipment failures, orders and replaces parts as needed.
Studies blueprints, schematics, manuals, and other specifications to determine installation procedures.
Installs or oversees installation of equipment according to manufacturer's specifications.
Operates system to demonstrate equipment and to analyze malfunctions.
Testing, tuning, and adjusting equipment to obtain optimum operating performance.
Trains customer (if needed).
2006 ¨C 2007 PT. Intraco Penta, Tbk Jakarta
Sole Agent for Heavy Equipment
Warranty Engineer
Supervise claim preparation for Volvo CE, inclusive of those warranty events rectified by technical Officer each region.
Ensure that claims are submitted to the Volvo CE principal within the parameter of time and all relevant data, example: Matris, VCADs, photos, delivery date, 100/1000 hrs inspection, include in the claim as required.
Monitor claim progress and credit note of each particular claim that has been accepted by Volvo CE, and reconcile amount paid again amount claimed.
Maintain complete warranty record and summary claim every end of month, also communicate with Volvo CE principle concerning all warranty matters and Technical Agreements in particular regarding claim of a contentious or policy nature.
Responsible for recovery, custody and storage of damage warranty parts from job site or branches to each region include warranty tags.
Responsible to justify warranty claim before sending to Volvo CE, to reduce or reject by principle in question.
2005 ¨C 2006 PT. Intraco Penta, Tbk Balikpapan
Sole Agent for Heavy Equipment
Component Rebuild Engineer
Responsible to make appointment and periodic meeting with customer to explain the component problem.
Responsible to manage and maintain component ITO (Inventory Turn Over).
Responsible to collect overhaul schedule from customers to synchronize with internal schedule.
Reporting to Regional Manager and inform to customer about Component Work In Progress (WIP).
Responsible to release a Technical Problem Report (TPR) for all components problem to terminate the quotation.
2005 PT. Intraco Penta, Tbk Jakarta
Sole Agent for Heavy Equipment
Management Development Program (MDP)
2004 ¨C 2005 PT. Aspex Kumbong (KORINDO Group) Tangerang
Container Manufacturer
Mechanical Engineer
With a team to standardization and material specification, design and drawing.
With a team to issue for Bill of Material (BOM)
With a team to make a prototype and fabricating.
2000 ¨C 2003 PT. Dasa Windu Agung Bekasi
Polyurethane specialist and accessories supplier for automotive
Production Engineering Deputy Dept. Head
Responsible to ascertain the production process is to pass over a good planning.
Responsible to create Standard Operational Procedure (SOP).
Responsible for production time balancing.
Special Assignments
Advanced Product Quality Planning (APQP) team.
Quality System (QS 9000) working group.
Failure Mode and Effect Analysis (FMEA) team.
Kaizen (Continuous Improvement) team.
------------
EDUCATION & CERTIFICATION:
------------
2002 ¨C 2004 University of Indonesia Jakarta
Bachelor of Mechanical Engineering (GPA 3.02)
1997 ¨C 2000 Swiss Polytechnic for Mechanic Bandung
Diploma of Tool Making (GPA 2.35)
------------
ADDITIONAL INFORMATION:
------------
- Address
SELAT MANIPA BLOK G VI / 3 ¡ñ KAVLING ALRI ¨C EAST JAKARTA 13440 - INDONESIA
- Place and Date of Birth
Pontianak, West Borneo (Indonesia), May 20, 1979
- Hobbies
Sport, travelling
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5801 to 5850 of 6411)

Go to Search Parameters...

Brief Description

I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.

Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.

Dynamic professional with BS in Mechanical Engineering from UCI seeking a challenging career in the oil refinery and/or power industries where technical and engineering leadership and direction are sought to execute projects from the developmental process to a finished state

construction/process plant cost estimator, certified project scheduling, projects control

Diploma in Mechnical Engineering with 5 years & 6 months of experience as Document Controller in Marine Tank Farm site of Reliance Petroleum Ltd. Jamnagar.

Dual Post Graduate Mechanical Engineer with 10 years of experience

Power Engineer/Operator Resume

Basic automotive schooling at technical school. One year automotive experience and three years work on Semi Tractor and Trailors

Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia

If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.

M.Sc. Applied Geology (68%Marks), M.Tech Petroleum Geology(67%Marks). 1 Month industrial trainings in National Oil companies. Petroleum Geosciences is my career subject. Besides,having soft skills, i also am user of GIS softwares and also know some petroleum upstream softwares.

Management -Technical Skills: Catia,Solidworks-Mechanical Desktop-AutoCAD-FEA-Carrier-MasterCAM-Microsoft Office(Word,Excel,Powerpoint)-Windows(98,XP,Vista)

Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services

Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.

Automation Engineer having two years of practical experiance with various vendor products like Siemens, GE etc..

Environmental, Occupational Health and Safety Engineer

Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.

AutoCAD, Office, CFD (Computational Fluid Dynamic), Basic Electric, Mechanical and Hydraulic.

Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS

Experience in ISO 9001, ISO 17025, ISO 17799 , Good Laboratory Practices(GLP) systems. The ISO 17025 and GLP are mainly focussed on testing and clinical laboraories. Almost 7 years of experience in Qulaity Management Systems as well as and System Administration activities.

BSc degree major in computer science; currently enrolled in CAPPA level 2; strong communication and analytical skills; self-motivated and positive attitude; efficient team player.

General manager of Services Company / QHSE and Management systems Oil and Gas sectors

I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.

Wide experience as HSE Coordinator as well as Safety Manager on several construction projects in live plants and heavy construction sites.

Lead Engineer for Aramco Transmission projects and Systems integrator also for Various overseas projects.

MECHANICAL ENGINEER

I have a University Degree in transport engineering. I’ve 3 years experience as cadet and OS. This year I’ll finish professional course and acquire navigator diploma. As beginner in offshore industry I’m ready to start at the bottom and begin my career on an oil rigs from entry–level positions.

Developement,depillaring with syowing,shortfirng,spporting,ventilation,surveying,

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Shift in-charge (Production Operator) & Maintenance Engineer-Electrical, 5+years experiences, MSc Power Engineering, Chalmers Technical University, Gotenborg Sweden, Management training, Computer operations (Windows application software, comsol multiphysics, Mathlab) skills, Plant safety training, p

Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..

I have work on 5 years experience in designing in mechanical engineering using Pro-Engineer, Pro-Intralink, Solidedge, Mechanical Desktop, Ansys

30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.

Scaffolding Engineer : Sales & Project Management, 6+ Years Exp

Experianced Petroleum Graduate

Technical, Managment, communication. Skills

I have over 5 years experience in the Electronics engineering field; and I am well versed in the areas of process control and Automation issues in conjunction with Software knowledge and Hardware design guidelines

Project Management

Enviromental Process Engineer/Technician

Over six years experience working as an engineering and environmental geologist. Manage, coordinate and field supervise all drilling activities and field work for large scale geotechnical and environmental projects for government and industrial clients in the eastern United States and Africa.

Document Control / Project Administrator

Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience

To use and hone my technically organize skills, knowledge and experience to Attain excellence in the industry by providing total customer satisfaction in field of mechanical Industry.

Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.

Bachelor of Science in Mineral Engineering, eight years experience as a project/test manager for the explosives and ammunition testing industry. looking to transistion into the mining industry.

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

NSW Electrical Contractors Licence, OHS Safety Consultant Ticket, Qualified Electrical Fitter-Mechanic, Senior First Aid trained.

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Assignments in Mould Design / New Mould manufacturing / Mould repairing / Reverse Engineering / New Product Development / Quality Management with a growth oriented organization of repute

I have about 2 years experience as a Geologist.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 [ 117 ] 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out