Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71420 next resume »»
CONTACT INFORMATION:
View contact information...

GOAL: Seeking Chemist or Laboratory Technician Position

INSTRUMENT/EQUIPMENT EXPERIENCE:

Chromatography
*Agilent 1100 HPLC with RID and UV detectors
*Hewlett Packard 5890A Series II, 5890A, 5790A, with autosamplers and
Chemstation software
*HP 6890 GC/5973 MSD-GC/MS
*Varian 3400/3800 with Star Chromatography software
*GC/FID, GC/ECD, GC/TCD, GC/OFID, and GC/ELCD/PID systems
*Tekmar Precept II and Tekmar 3000 purge/trap concentrator

Spectroscopy
*Bruker Vector 33 FTIR with OPUS software/Chemometrics
*Siemens 3000 XRF
*Varian AA
*Dohrman Nitrogen Analyzer by Chemiluminescence
*Dohrman Sulfur/Chloride Analyzer by Microcoulometry
*Antek Nitrogen Analyzer
*MDA Sulfur and Toxic Gas Analyzer
*TOC Analyzer

Wet chemistry-other
*Acid/base number, pH, chlorides, acidity, mercaptens, phosphorus, thiophene, carbonates, phenols, peroxides, aldehydes, bromine index, saponification value, lead, arsenic, oil content, iron, benzene, nitrates, fluorides, Brookfield viscosity, BTU, specific gravity, distillations, pour point, and color
*Karl Fischer Water
*Orion pH meter
*Prepared samples for ICP/MS analysis using microwave digestion
*Utilized variety of glassware and lab equipment
*Maintained Statistical Process Control (SPC) Data
*Compiled Material Safety Data Sheets (MSDS) for chemical inventory
*Operated Laboratory Information Management System (LIMS)
*Ordered Laboratory Supplies and parts

WORK HISTORY:

Los Alamos National Lab, Los Alamos, NM (2009-present)-Contractor
*Perform testing of chemical wastes for volatile organics
*Responsible for data review, testing of samples using GC/MS, and following operating procedures
*Completed LANL required safety training

Worked temporary positions while seeking regular-status employment (2007-2009)

Source One Staffing, Arvada, CO (2006-2007)
*Lab assistant for scientists conducting biofuels research at NREL
*Prepared stock solutions and glassware for experiments using sterile technique
*Sterilized and prepared equipment using autoclaves; prepared growth media/plates

Sartomer, Grand Junction, CO (2000-2005)
*Performed testing of chemical plant polymer samples using FTIR, LC/GPC, GC, titrations, and viscosity
*Responsible for instrument maintenance, computer database, and writing/revising procedures
*Participated in ISO 9002 audit and preparation; performed safety walkthroughs in the plant
*Assisted with training of new lab personnel; interfaced with operators and plant personnel

Atoka Geochemical, Englewood, CO (1999-2000)
*Analyzed soils in support of oil and gas exploration
*Responsible for sample prep, reagent preparation, and quality control
*Soil sampling of Nevada basin areas; used topo maps; plotted sample locations

Environmental Chemistry Services, Englewood, CO (1998-1999)
*Performed testing of water and soil samples by EPA methods
*Operation of gas chromatographs with FID and PID detectors
*Assisted in metals analysis by ICP/MS, organic sample prep, and data review

EDUCATION: University of Houston-Clear Lake
*B.A. Biology/Chemistry minor, 1995
*Studied instrumental methods of analysis/operated GC/MS
*Attended training course for FTIR
*Familiar with Microsoft Office Suite
*Completed HAZWOPER and CPR training

View contact information...
«« previous resume next resume »»
Search Results (Resumes 6551 to 6600 of 7012)Go to Search Parameters...
Brief Description
Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.
HE Electrician/Crane Operator with 5yrs. experience
P&PCM, MBA, B.Arch
Seeking a full-time position in Quality Assurance
Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist
Retired PAF personnel having 25 yrs of experience and also remianed as instructor.
I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry
Currently working as the Service Manager for the CAT dealer in Papua New Guinea, Tabubil branch. There are 56 employees in the service department and the branch takes care of up to 40% of HD PNG earnings.
Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training
Sr operations Manager
I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.
IIT Graduate - SAP Implementation Exp - 2 yrs
Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.
Operations Supervisor
7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.
SAP FICO consultant with 10 years experience
Graduated in the field of Mechanical Engineering and presently working with one of ADNOC Group of companies as a Maintenance Planner / Scheduler (Mechanical). Have been associated with Oil & Gas sector for more than 4 years. Work experience on CMMS and Primavera skills.
A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects
Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS
Seeking Chemist or Laboratory Technician Position-will relocate
Electrical Engineer
I am an extremely well organized, tedious, and hard working individual. I am well versed in directional drilling and, knowledgable in all aspects of the drilling industry. I am
Research Thesis on ANTENNA/RF
Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.
A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.
Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý
Having good leadership qualities, I can effectively lead and motivate a team. Possesses good inter-personal skill. I value success, which gives me the motivation and drive necessary to achieve personal and company goals. Experience in safety and 5S system implementation
diploma in mechanical engineering
B-Tech (Mechanical Engineering) .Presently working as Scientific Officer in Nuclear Power Corporation of India Limited (Department of Atomic Energy).having experiece in 1.Power production, planning and control of process carried out in the plant. and 2 commissioning of systems
Strong knowledge in electronics industries PCB design, assembling, trouble shooting
Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.
I am a graduate mechanical engineer with close to 16 years experience in the engineering, maintenance, and project engineering fields; large power stations and also in the oil & gas field. Extensive Maximo computorised maintenance management system (CMMS) experience and worked on SAP for 3 years.
Seven years experienced within the Oil & Gas Industry with Multinational Companies engaged in the EPC of Refineries, Petrochemical and Chemical Process Plants, Gas Plants, Well - Heads, Shutdown piping, Cross-Country and Mountain Pipeline projects, in the specific areas of Commissioning Certificati
CHEMICAL PLANT OPERATION
Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management
HVAC, Maintance
I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.
I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.
Pro Engineer 2+ years experience
I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.
Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript
I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE
I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.
I am Proficient in Process Modeling/Simulation and Oil & Gas Production Optimization using Nadal Analysis (SAM, PERFORM, PROSPER). I have experience in Oil Analysis, NDT corrosion inspection, and equipment condition monitoring.
Experienced Automation/Process Control Engineer
DRILLING FLUID ENGINEERING ( MUD ANALYSIS), SURVIVAL AT SEA AND HELICOPTER UNDERWATER ESCAPE TRAINING, M S SUITE
1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician
FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,
10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems
B.Tech Engineer having 2+ years of experience presently working as a planning engineer with Reliance ,Jamnagar for JERP project. Can handle softwares required for job accomplishment.
First   Prev   101   102   103   104   105   106   107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   [ 132 ]   133   134   135   136   137   138   139   140   141   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com