Resume - qualiy inspection

Misco Jobs

Resume #71427

CONTACT INFORMATION:
View contact information...

SUMMARY:
5 Years experience in oil & gas and Project works in three countries creating and implementing quality systems through to turnover to client, including receiving inspection, multi discipline project inspection teams, and the co-ordination of auditors and performing audits of engineering departments for front end engineering and design, construction, commissioning, and eventual handing over to client.

QUALIFICATION:

► B.TECH. in discipline of instrumentation Engg. from
SLIET Longowal under Punjab technical university
Jalandhar ( Pb.) in June 2002 with 65 % overall aggregate.

►Three years diploma in instrumentation Engg. From govt.
Polytechnic kangra under H.P. technical education board
( H.P.) in 1998 with 70% overall aggregate.

►Matriculation from govt. pre polytechnic Kangra with higher first division.

TECHNICAL KNOWLEDGE:

► PLC Programming in Ladder Logic of Allen Bradley Software
. ( Micrologix 500,1000,1200 etc)
►Installation, programming and Commissioning of PLC and AC drives.
of Allen Bradley make.
►Conversant with,Instrument calibration work.
►Experience of Electrical & Instrumentation Inspections.

PROFESSIONAL EXPERIENCE:

Aug 2003 - Dec.2004 Inditex India Ltd ( New Delhi –India)
Elect. & Instrumentation Trainee Engr

►Study and Checking of MCC and control Panel Drawings
►Supervising the Panel work from the initial stage to the final stage such as panel wiring, Equipment Installation and testing etc.
►Installation and commissioning of PLC
►Assist in developing the PLC programms.

Jan. 2005 – July 2005 Energy Logistics Pvt Ltd (New Mumbai – India)
System Engineer

►Fabrication of Variable Feed Control ( VFC ) System.
►installation and Commissioning in the process industries using control instruments e.g. PID Controller, Pressure Transmitter and Solenoid Valve.
►Checking of Proportional, Integral & Derivative Parameters of the process.
►Setting of PID parameters in the controller.

Aug.2005 – July 2006 Alpha Engg. Pvt Ltd ( New Mumbai- India)
System Engineer

►Employed as a system Engr for automation projects.
►Understand the requirements of customer and prepare the input/ output map for the system.
►Preparation and checking of programs using specific inputs and outputs
►Downloading and uploading of programs to and from PLC.
►Installation and termination of PLC and AC drives after programming of Allen Bradley make.

Oct. 2006 – July 2007 S.K. Engg & Construction Ltd( KOC - Kuwait )
QA/QC Engr. Electrical &Instrumentation

Facility upgrading project ►Here my work profile was to make inspection Notification,
►Prepare inspection testing plans as per KOC standards &
KOC- Kuwait specifications and submit it to PMC (Client) for final approval.
►Preparation of procedures pertaining to quality assurance and
GC-11 &19 control.
►Checking of all electrical and instrument drawings like cable routing, instrument location, PID Drawings, Earthing, cable schedules / terminations & other detail drawings.
►Providing work instructions to supervisors to follow KOC approves
Specifications and standards.

. Inspections Include
►Cable Trench Inspection, Cable Pulling inspection.
►Cad (Thermite) Weld Inspection for Earthing cables, Inspection of Concrete foundations, Instrument Stanchion Inspection, Cable
►Tray Inspection, Cable Termination to Panels, Lighting Poles,
MCC Panels, Cable Splicing Inspection, Duct bank Inspection, and installation of Conduit Pipes etc.

Achievement:
Successful Installation, Termination and commissioning of electrical And instrumentation facilities

Nov.2007 - Till Date Hyundai Heavy Industries Ltd Nigeria ( West Africa )
QA/QC Engr. Electrical &Instrumentation
Client: ►Supporting and implementing required Quality framework so as to ensure technical integrity assurance and reporting
Chevron Nigeria Ltd same to the appropriate authority.
►Ensuring compliance with Technical integrity by verification
Onshore Project of all QA/QC activities of sub contractor Grounding work,
►Interfacing QA/QC activities between the owners( Chevron),
Nigeria the Contractor ( Hyundai Heavy Industries ) and sub contractor (Yomatech Nigeria Ltd and Cisan International Ltd )
►Reviewing submitted Reports ( submittals) and verification of same to ascertain compliance by the sub contractor.

Major Activities:
►Checking of Earthing Drawings, PID Drawings, Instrument location Drawings,
►Documentation work, Preparation of Punch List, and NCR's
►Preparation of Receiving Inspection Reports for the inspected material after Checking of Vendor documents on the project space ( on the Company site ).
►Perform audits at each site location to determine each sites project closeout requirements.
►Creation of quality plans and procedures, ITP`s, and the associated checklists.
►Review of subcontractors quality plans, procedures and
Inspection testing plans.
►Determine audit scopes, agendas audit checklists for electrical and instrumentation systems..
►Determine corrective actions, observations and opportunities for improvement, create the action plan, assign responsibilities and follow through to closeout.

KEY SKILLS:

►Ability to adjust in new and challenging situations quickly
►Good communication skills and ability to interface and communicate effectively with stake holders irrespective of cultural affiliation/ background.
►Ability to work with minimum and ability to move to job locations at short notice, irrespective of distance.
►Good organizational skills, and pay attention to details.
►High professional, personal and corporate integrity and confidence.

INTEREST:

►Making positive changes/ contribution to my immediate environment.

EXTRA CURRICULAR ACTIVITIES:

►Second Prize winner in Choreography in the annual function Of institute.
►Delivered lectures on Yoga, Meditation and on technical topics in the Institute.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2201 to 2250 of 6520)

Go to Search Parameters...

Brief Description

Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects

Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.

10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.

Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.

TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET

Welding Inspector

Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.

I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.

Master in Industrial Engineering (With 3.86/4 CGPAand BE in Mechanical engineering(With Honours) with adequate knowledge of computer including (MS Ooffice, autocad 200) and good communication skills.

Project Management

Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.

Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.

Senior Piping Designer PDS

Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.

Rig mechanic, mechanic supervisor, motorman, diesel mechanic

Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer

Mechanical Maintenance Engineer/contract and Procurement Engineer

Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat

QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.

Quality engineer in offshore and onshore fields

Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)

ESSAR OIL LTD- FCCU (May 2005 to May 2008)

Electronics & Mechanical Engineering with QA/QC certification

18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.

B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools

Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.

Petroluem Engineering

Electrical Engineer

Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)

Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems

Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard

2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor

I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.

qualiy inspection

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.

Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.

Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.

TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Drilling Supervisor / Engineer 5+ years experience with HTHP wells.

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 [ 45 ] 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out