Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #71509 next resume »»
CONTACT INFORMATION:
View contact information...

Date of birth: 27/02/56
Languages: English – Spanish
Education: Degree in Engineering 1978

Experience

1980-1983 CITIES SERVICE PETR. CORP. (CITGO) (Drilling engineer) Drilled 3 exploration wells in Colombia, middle valley of the Magdalena river in Payoa field,: drilled to 14000 ft. depth and several development wells in La Salina field, including well planning,,directional drilling, casing design, casing cementing, squeezing, workovers.,bid tenders evaluation., track schedules, drilling time curves, ensure well bore stability, offset wells data research

1983-1995 OCCIDENTAL PETR. CORP. (OXY) (Drilling engineer) Drilled 6 exploration wells in Corocora field East Llanos of Colombia Casanare, and some others development wells, including bid evaluations for services companies, logistic coordination in remotes areas, well design and drilling prognosis, ensured wells were drilled before time and budget
Drilled 7 exploration wells in Caño Limon field, Arauca Dpto. and over 100 development wells, including S type directional drilling, coordinated logistic for heli rig transportation, DST, ESP completion, workovers, well construction, well delivery, Planning schedules, technical evaluation of tenders, AFE control,

1995-1997 SCHLUMBERGER IPM (Drilling engineer) drilled 3 wells for PDVSA in Maracaibo Lake offshore Venezuela, in Lagunilla, Urdaneta and Center Lake fields, including horizontal drilling with short radios of curvature using down hole articulated motors with 1000 ft of horizontal navigation, implemented air drilling for low pressure and depleted zones with rotary heads and wet connector for navigation control, drilled some reentry wells successfully.
Drilled several wells in East Venezuela, deep heavy drilling to 18000 ft, with oil base mud in hi-pressure zones, Furrial and Mulata field Including directional drilling with MWD and down hole motors, used impregnated bits with down hole turbines for very hard formations, implemented dry closed loop locations for environment protection,

1997- 1998 SCHLUMBERGER IPM (Drilling engineer) Drilled some wells for PEMEX in North Mexico, Arcabuz and Culebra field, Burgos gas project Turnkey contract, including tubing less completion, performed well control operations bringing well under control in a lost circulation zone, optimized safety regulations (QHSE) to avoid accidents,

1999-2000 Kappa Resources Ltda (Drilling engineer) Drilled well Cachimbero 1, in Middle Valley of Magdalena River, tested heavy oil, of 17 degrees API, involved in all stages of drilling in remote areas, testing and completing

2000-2001 Schlumberger IPM ( Drilling engineer)Drilled several wells in Cusiana and Cupiagua field for BP AMOCO to 18000 ft in foot hills, of Colombia coordinated all integrated services lines of Schlumberger,

2001-2002 Schlumberger IPM (Drilling engineer) Drilled horizontal wells for Petroecuador, in Amazonas jungle Sacha field, Shushufimdi field, Limoncocha field involved in daily follow up on drilling progress and well trajectory in horizontal wells, daily rig calls, response to daily drilling issues from rigs.

2002-2004 Shell Petroleum Development Company of Nigeria (Drilling engineer) drilled wells in the Níger Delta, onshore, and swamp area, Bonny, Minita, Cawtonchanel, Egbema, Otumara field dual completions, workovers, full filled all government safety regulations

2004-2005 ( Drilling engineer) Drilled wells for Ecopetrol in Colombia, LLanito field, for Perenco in Guatemala Xan field, monitor daily performance indicators, reporting, final reports well delivery, daily coordination with rigs supply, workover for Petrobras in San Francisco field

2005-2006 Saudi Aramco, (Drilling engineer) Offshore Arabian gulf, in Saudi Arabia Marjan, Safaniya, Hamur, field, horizontal multiraterals wells with smart completion, platform batch drilling, equalizer screens, H2S, cost control, optimized ROP for cost per foot control

2006-2007 (Drilling engineer) for Repsol in Libya El Sharara field in charge of follow up of daily drilling reports, and coordination of materials with service companies, assisted Drilling Superintendent with daily communication with rig supervisor Sahara desert, well view

2007 2008 (Drilling Engineer) KPO Kasakhastan Former Soviet Union Karachaganak field Drilling proyect well 9810, daily drilling operations, updated Open Wells, daily data base, cost control, DIMS, drilling consultant for Pacific Stratus Energy in La Creciente field, ensured wells drilled inside budget and time, coordinated rig materials supply before time, AFE track and control

Last well control certification IADC from Randy Smith WCS Nov 2007 valid for 2 years

Training:
11/05 Well Control Surface and Subsea IADC Bahrain
03/00 Stuck pipe prevention and PTW in BP Amoco Cusiana field Colombia
02/00 STOP course in BP Amoco Cusiana field Colombia
07/94 Well Control Surface and Subsea (Randy Smith) Houston
01/92 Well Control Surface and Subsea (Murchison) New Mexico
02/91 Tubular Inspection (TH Hill associates) Lima Peru
01/90 ESP school (Centrilift) Claremore Oklahoma
01/88 Well Cementing (Halliburton) Duncan Oklahoma
12/87 Well Completion (Rike Service) New Orleans LA, USA
08/86 Hydrogen Sulfide (Midland Safety and Healt inc) Odessa TX
07/86 Fire Fighting School (Oxy Caño Limon) Colombia
04/85 Drilling Practices ( Preston Moore) Norman Oklahoma USA
01/84 Drilling Fluids (Magcobar Dresser) Houston USA
05/83 Drilling Bits (Security Dresser) Dallas USA
01/82 Drilling Practices (Oxy Technical Center) Tulsa Oklahoma
05/80 Electric Logging (Schlumberger) Bogota Colombia

View contact information...
«« previous resume next resume »»
Search Results (Resumes 51 to 100 of 6540)Go to Search Parameters...
Brief Description
Project Manager with 26 years experience managing Oil and Gas FEED, EPC, PMC, EPIC, and EPCM projects . Responsible for Senior Project Engineers, Contracts Administrators, Project Controls Engineers, Safety Engineers, and QA/QC personnel. Worked with and managed expatriate and multi-cultu
I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.
A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.
I am holding a Master degree in Chemistry. I have 19 yeras of experience in Oil and Gas Industry. I worked as Drilling Fluid Specilaist for 11 years in Offshore and 3 years in land rigs. 5 years I worked as Refinery Quality Control Department. I have working for Oil and Natural Gas Corporation Ltd,
A B.Sc. Chemical Engineer with over 23 years of experience in oil&gas and Petrochemical Industry, I am specialist for different Petrochemical processes (Steam Reformer,H2/CO production-purification with Cold Box or PSA, Chlorine production and liquefaction…), commissioning and start-up. I am able to
22 years of experienced geophysicist/exploration specialist
ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6
Industrial Engineering
22 years of working experience in E& P Industries.Experience covers entire spectrum of Geophysics i.e. from Seismic Data Planning& Acquisition to Seismic Interpretation.
Geoscientist
Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.
15 years of experience with visible/near-IR and hyperspectral imagery, and image exploitation (I have co-authored a book on hyperspectral remote sensing). I have a Ph.D. in Geology, an M.S. in Computer Science and I will have an M.S. in Applied Math in Spring 09.
With over 30 years in the Oil and Gas industry responsible for Health, Safety & Environment (HSE) and Loss Prevention (LP) activities on major offshore floating FPSO’s and fixed Installation projects. I can offer a broad range of safety experience from HSE/LP engineering to management.
25 years experience, experienced inj oil-gas field and reservoir development
Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.
Registered Professional Engineer (P.Eng) in the Province of Alberta.
Instrument technician with 13 years experience
Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion
Highly Experienced Crane and Lifting Engineer
Marine Engineer, Chief Engineer Unlimited
Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)
qa qc inspection oil gas engineer coordinator welding painting ndt auditing equipment
Accomplished PLC, HMI, automation, programmable controls specialist
A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.
+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic
Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,
DRILLING ENGINEER
Experience in DCS, PLC, applied to Process Industries and Power Plants. Exp/ with logic diagrams, erection and commissioning,P&ID, MCC, specifications, studies and cost estimation.
25 years of experience; more recently as Principal/Lead Engineer. 5 years in middle/senior management. Most contributions are in design, engineering & commissioning of pumps, compressors and turbines. Oil & Gas experience includes Refinery and Upstream, Marine, Pipeline pumping & compression stn.
I GRADUATED FROM TULSA UNIVERSITY ,OKLAHOMA,USA,1985.WITH A BACHELORE DEGREE IN PETROLEUM ENGINEERING,I HAVE A 24 YEARS OF EXPERIENCE IN DRILLING INDUSTRY , IN THE PRESENT TIME I'AM WORKING IN AN OIL CO. AS AN OPERATIONAL MANAGER.
17 yrs of experience in oil and gas industry including current assignment on offshore installation operations support, most recent oil and gas terminal design projects, commissioning group support, treatment works and pumping stations rehabilitation, pipeline construction and offshore platform.
Thirty years of experience in EH&S in the oil, construction, and the insurance industries. Throughout my career I have managed the safety and environmental requirements for drilling operations, gas processing plants, and offshore platforms. Participated in design review, permitting, environmental
A medical doctor with long years of experienced on the rig,company ,ship,clinic and hospital seeking employment.
Over 33 years of working experience within India and abroad as electrical superor, senior electrical foreman, commissioning engineer, Elelectrical specialist.and Specialist Consultant.All the 33 years Maintenance ,Commissioning and Consultant for CMMS and Mtc Optimation Projects in oil,power Indys.
Has over 24 years experience in instrumentation oil and gas, power generation , and process industries. Working experience as Commissioning supervisor to carry out Erection and commissioning of Control Instrumentation system for process industries & Thermal power stations. Successful commission
Wellservices Slickline Supervisor for the past thirty years.
Work experiance in plant maintenace , hydrogen plant and rig component and complete rig manufacturing. Welding and metalergy testing. Rig inspections covering all aspects. Thanks.
Qualification: B.Tech - Chemical Engineering, Skills: Pre-commissioning, commissioning, start up, test run and handing over of the plant to the operation department
Engineer, since 1988 when I graduated the Institute of Oil and Gas ,Ploiesti, Romania (IPG Ploiesti)
Senior Inspection Engineer
Well Integrity Specialist, Completion Production Engineer
I offer many years of experience in the Petroleum Reservoir Engineering field. I have expertise in reservoir engineering management and consulting, reservoir integrated studies, well testing/pressure transient analysis and decline curve analysis
Sales and marketing,Business development
HSE Advisor / Engineer / Co-ordinator
I senior completion and workover engineer 19 yeas experience
Integrity management engineer with world leading expertise
Corrosion and Metallurgy Engineer, Painting and Coating Inspector, Engineer, QA/QC Inspector, Manager
16 years of professional experience (after post graduation) in Engineering Consultancy for Front End Engineering & Design, Detailed Engineering, EPC, Different Plant Modifications of onshore & offshore Oil & Gas, Refinery, Utility facilities as Senior Mechanical Engineer and as Project Lead Engineer
My extensive oilfield experiences allow me to occupy many different positions in any oilfield company. I acquired an extensive knowledge of all Safety issues, well engineering process and equipment, well drilling, well testing, completion and work-over engineering.
Night pusher with 21 years experience in oil and gas industry
First   1   [ 2 ]   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com