Resume - Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually

Misco Jobs

Resume #71548

CONTACT INFORMATION:
View contact information...

I am 34 years old Deep Sea Captain unlimited.
I have been going to sea for 20 years.
I was born and raised in Odessa, Ukraine. I went to "Young Seaman's School" when I was 12 and spent three years there learning basic safety and seamanship techniques before I step on board of my first ship as deck boy. I finished secondary school aged 17. After I attended "Odessa State Marine Academy" and upon leaving academy I achieve qualifications of Engineer Navigator.
My grandfather had worked at sea all his life starting from ordinary Navy seaman (deck hand) and passed all the way up to the rank of Master. I was quite happy, planning to follow in his footsteps. I passed a lot of courses and examination and all my knowledges supported with good sea practice and experience.
I have Rig move, Tanker-lifting and Anchor handling (J-hooking, Buoys anchors retrieving) driving experience, as well as Offshore Installations supply operations.
My previous experience on cargo Vessels gave me deep knowledge of cargo handling and ballast management and also include frequent usual passing of International Port state Control inspections, Classification Society examination and often visitation by U.S. Coast Guard with no any remarks for detention matters.
The work at Offshore can be hard but is ultimately challenging and often very interesting.
This obviously requires a very high level of professionalism and self-confidence.
I would like to get a chance to be employed as master or chief mate with your company.

Personal Details
Date & Place of Birth 25-Apr-1974, Odessa, Ukraine
Nationality Ukrainian
Nearest Airport Kiev, Odessa
Next of Kin
Passport, VISA & Seaman book ( Discharge book )
Country of Issue UKRAINE
US Visa C1/D US VISA Expires 11-Jul-2010
Seaman Book no AB 365225 Issue Date 27-Jul-2007
Seaman Book Expiry Date 27-Jul-2012

Highest Certificate of Competency / Licence Held
Class / Grade Issuing Country Certificate No. Date Issued Expires Details of Limitations
Master unlim.
DeepSeaCpt. Ukraine 00787/2007/03 12-Jul-2007
Endorsement Ukraine 00787/2007/03 12-Jul-2007 23-Mar-2010 Not valid for Tankers
Dangerous Cargo Endorsements
Certificate No. Date Issued Expires
Petroleum……………. Nil
Liquified Gas……….Nil
Liquid Chemicals…….Nil

Courses Attended and Certificates Obtained
Name of Course / Certificate Institute Place Date Cert No Expires
Radar Observer I M T C-Izmail Ua Izmail, Ua 30-Jun-2007 1407 IZ 29-Jun-2012
Radar Simulator I M T C-Izmail Ua Izmail, Ua 30-Jun-2007 1407 IZ 29-Jun-2012
ARPA I M T C-Izmail Ua Izmail, Ua 30-Jun-2007 1407 IZ 29-Jun-2012
Marine Ship Captains Course I M T C-Izmail Ua Izmail, Ua 03-Jul-2007 0418/2007
Medical Care on Board of Ship OMTC Odessa, Ua 23-Mar-2005 0145/2005 23-Mar-2010
Basic Sea Survival OMTC Odessa, Ua 14-Mar-2007 92513/2007 14-Mar-2012
Proficiency in Survival Craft OMTC Odessa, Ua 18-Jun-2007 52738/2007 18-jun-2012
Advanced Fire Fighting OMTC Odessa, Ua 22-Jun-2007 0563/2007 22-Jun-2012
GMDSS Mortelecom Odessa, Ua 12-Jul-07 03356/2002/08 21-Jun-2012
Bridge Team Management OMTC Odessa, Ua 24-Sep-1999 0045/1999
Ship Safety Officer OMTC Odessa, Ua 30-Jan-2003 0396/2003
Medical Fitness Certificate
Archi Med Odessa, Ua 18-Jul-2007 1150 17-Jul-2008
HAZMAT OMTC Odessa, Ua 22-Jun-2007 0577/2007 22-Jun-2012
Ship Security Officer OMTC Odessa, Ua 27-Sep-2005 001422/2005/04 27-Sep-2010
Dynamic Positioning Induction Course Admiral Makarov
State Maritime Academy St.Pitersurg,
Russia 28-Dec-2007 067/07
Dynamic Positioning Simulator Course Admiral Makarov
State Maritime Academy St.Pitersurg,
Russia 25-Apr-2008 048/08
Dynamic Positioning Log book Details The Nautical
Institute 28-Dec-2007

Hours done with various DP system
SYSTEM DETAILS Hours as SDPO Hours as JDPO
JS5000-Nautronix (2 DGPS, FANBEAM) 732
ALSTOM class1( 2 DGPS, FANBEAM ) 118
KONSBERG SDP-11 class1 ( 2 DGPS ) 204
APPROXIMATE Total DP Hours in Various Operations
AIR DIVING SURVEY 62
AHTS 260 PSV 732
Record of Sea Service
VESSEL COMPANY Type of Vessel DWT Type of Engines BHP RANK Sign on DATE Sign off DATE
BIG JOE TIDE TDW AHTS 2300 6000 Chief/Off. 23/01/08 20/04/08
NELSON TIDE TDW AHTS 1600 5300 Chief/Off 28/10/07 29/11/07
COMOTTO TIDE TDW AHTS 1808 7190 Chief/Off 10/10/07 28/10/07
GULF SERVICE TDW AHTS 1800 11200 Chief/Off 15/08/07 10/10/07
CLARY MST Bulcker 12000 7000 Chief/Off 20/10/05 14/02/06
ALEXANDRIA Peter Dohle Minibulk 6000 4300 Chief/Off 17/05/05 20/09/05
KRIOS Sea Observer Bulcker 12300 5800 Chief/Off 06/01/04 30/08/04
SELAS Sea Observer Gen.Cargo 9600 4800 Chief/Off 29/12/02 05/07/03
PACSTAR LASCO Logger 27600 8200 2-nd Off. 21/09/01 23/02/02
PACKING LASCO Logger 32200 13050 2-nd Off. 21/07/00 21/01/01
PACDREAM LASCO Bulcker 25800 7000 2-nd Off. 25/11/99 07/05/00
PIMA ACOMARIT Bulcker 68000 10500 3-rd Off. 24/12/98 01/07/99
P-STAR Foenix Sh'g Bulcker 25000 10000 3-rd Off. 22/10/97 15/05/98

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 6520)

Go to Search Parameters...

Brief Description

Senior reservoir engineer: 30+ yrs experience in N. America, S. America, and Europe. Denver-based. Available for contract work, long-term or short-term. Fluent in English and Spanish.

Drilling Specialist for 35 years. Postings have included Worldwide Drilling Manager, In-Country Drilling manager, Drilling Engineer, On-Site Drilling Supervisor and Drilling Consultant. Skilled in foreign start-up operations and training of Nationals.

Anchor Handling, Rig Moves, Tanker-lifting, operations both on DP and manually

Over 22 years’ professional experience in Conceptual, FEED, Detailed engineering and project management in Oil & Gas, Refinery, Petrochemical and Chemical projects.

Electrical and Instrument Project Execution, Installation and Estimating

Telecom field technicians Customer end

QA / QC Engineer - Painting / Coating / Insulation / Refractory / Fire-proofing

Principal Engineer with 20 years Umbilical, Flowline and Riser Experience Design, development and installation of flexible Flowlines, risers, umbilical and oil offloading lines and associated ancillaries. Including dynamic, structural and on bottom analysis.

Free! I am a chemical engineer having 17 years of work experience in India and Bahrain at various management levels in process engineering and operations, troubleshooting of of Fluidized catalytic cracking, gas compression, concentration units, and hydro processing units, gas treatment & sulphur recovery

Two years post apprenticeship training as a Welding Engineer, under the supervision of the senior welding engineer, working on the manufacture of overland pipelines, pressure vessels, nuclear pressure vessels, heat exchangers and various projects for the Middle East and Libya.

Totally 25 years experience in execution of Electrical Maintenance works in 210MW, 150MW, 120MW and 20MW Generators, Transformers, Breakers, Motors, UPS, MOV, EOT Cranes, HVAC, Lightings, Protection Relays Testing, electrical equipments and PLC, DCS, SCADA, WinCC, S5, S7 hardware

Managemen and Multidiscipline Engineerign Coordination of Oil & Gas Industry |FEED and Detail Engineering Projects.

Bachler in Arts + 3 yeart Appranticship in Instrumentation and control

Experienced in Mechanical & Electrical Installation Of Equipments in Plastics & Petrochemical Industries

having 18 years of sound experience in Commissioning and design, with Bachelor degree

unigraphics designer drafter

Interested in jobs in Saudi Arabia only. Although, I specialize in biomedical sensors and microelectronics, willing to try out other areas of Eng.. I have more than 15 years industrial experience in diverse engineering disciplines.

I am a Senior DCS/Instrument engineer with 19 years of experience in Project engineering, Construction, Commissioning and Maintenance support of Oil/Gas & Petro chemical industries.

Safety/HSE Manager

20+ years RE experience in brownfields, greenfields, offshore, onshore, dry gas, gas condensate, light, medium and heavy oil, sand and carbonate. Expert in WT design and interpretation, Reservoir Simulation, Horizontal well, Tight Gas, Hydraulic Fracture,Fractured Carbonate, EOR (WAG, CO2, Thermal)

I am a diploma holder (3yrs course). Having wide knowledge on electrical / Instrumentation / process control panel board operation. Having 19+ year experience (includs 12yrs Oil and Gas plant). Looking for rotational jobs

Petroleum Engineer, Well Site Supervisor

13 yrs exp in oil industry with 6 yrs as a Geologist. Worked in different countries of Asia & Middle East with numerous clients. Experience in clastic, carbonate, & basement reservoirs, HTHP wells, horizontal drain with geosteering tools. Currently working as Wellsite Geologist for Total Yemen.

25 years Drilling, Completion, Work-over Supervision. International experience Dominican Republic, Venezuela, Oman, Qatar, Ecuador and North Sea. Domestic experience Kansas, Oklahoma, Colorado, Texas, Louisiana and Alaska. Sub Sea experience Gulf of Mexico and North Sea.

22 years of aircraft maintenance related experiences with the United States Air Force

Currently working for Raslanuf oil and Gas Company (RASCO) as Senior Process engineer, Working within Technical services department Process engineering Division.

Reservoir, simukation and production engineer

Experience maintenance planner in oil and gas industry. Also has experience in quality control and inspection of materials and spare parts. Knowledge in MS Office applications and Maintenance Managment Computer System

Electrical Engineer Technician; 14 years experience; Master's Degree; Commissioning; Pre- commissioning; Inspection; Testing; National Electric Code

I am a mechanical & metallurgical engineer experienced in QMS ISO 9001:2000, internal auditing, welding, NDT, materials etc

Certtified hygienist with more than 30 years of experience. Presently working both onshore and offshore in the Middle East. Qualified OHSAS 18001 auditor. Masters degrees in both Occupational Health & Environmental Management. Excellent interpersonal skills. Looking for challenging position.

Key Competencies: over 20 years of experience in technical jobs: On shore, Oil, Gas and petrochemical and Power Plant Industries involved in Project Management, Commissioning Maintenance and repair, Lubeoil/seal oil flushing of compressors and pumps, QA/QC rotary and static equipments, etc.

Senior Mechanical Engineer (Projects/ Engineering / Design). I have diversified experience of about twenty-four (24) years in the field of Design & Projects Construction of Gas & Oil Production(onshore / offshore), Artificial Gas Lift, Water Flood and Oil Refining.

3 years working in PAE as Main Drllg. Eng. in charge of vertical & horizontal wells (oil & gas). 9 years w/Total (Argentina) as Drllg. Sup. onshore & 2 years as Coman Senior offshore ( jack up).Several positions f/Drllg trainee to Drllg Manager in Drllg Contractors Companies.

Strong background experience (19 years) in petroleum engineering, optimizing oil & gas fields, plants operations and gathering systems. Leading operation team in planning and monitoring production activities

Analyze requests for contracts initiation and develop contracts packages, set and recommend qualification / evaluation criteria and negotiation strategies and attend the same, coordinate and advise users Divisions on contractual and commercial matters.

I am currently working as Principle Process Specialist for Worley Parsons MEG, Calgary. I have more than twenty-four (24) years of experience in process design, conceptual studies and operations, for oil and gas projects (both onshore and offshore), petroleum refineries and petrochemical complexes.

Strong hold in Erection, Pre-Commissioning,Commissioning and start-up.

Managed the activities of two Draftspersons. Supported the International, Offshore and Onshore Divisions in Exploration and Land Departments. I created Structure and Isopach contour maps. Created Land maps with metes and bounds descriptions from leases. Created Cross Sections using well logs, montag

I have senior technician diploma from API ORAN (ALGERIA) my works experience is as follow: In the begining, I have worked for paints society since three years after I have change the society for SONATRACH after macking a test and Ibegin the new work as plant operator for one year, after as panelman

CSWIP Senior Welding Inspector BG Grade 2 Painting Inspector NDT ASNT Level 2

More than 17 years experience in mechanical maintenance and projects in cement industry and steel

Reservoir Engineer,18 years of experience from Condensate to Heavy oil fields, over 4300 hours of intensive petroleum training. Extensive experience as Integrated Team Leader. Extensive experience with Single and Multilateral Horizontal wells in Heavy Oil field. Simulation, planning experience.

Twenty-Nine (29) years of experience, working under various international companies in Middle East, Europe and in South East Asia countries.

PLAN SUPERINTENDENT,PLANT MANAGER.SHUTDOWN MANAGER,MAINTENANCESUPRINTENDENT.TECHNICAL CONSULTANT.COMMISSIONG ENGINEER

QA/QC/NDT w/ experience in industrial & aviation applications, Will travel worldwide

Excellent in C & Fortran program languige. solid geophysics knownlege

OVER 18 YEARS OF EXPERIENCE TO SUPERVISE / MANAGE PLANT MAINTENANCE FUNCTION IN PETROCHEMICALS / POWER / OIL & GAS / UTILITY WITH EMPHASIS ON RELIABILITY USING LATEST TOOLS AND APPLICATION SOFTWARE LIKE SAP/R3-PM MODULE, MS PROJECT AND OTHER ENGINEERING TOOLS.

Casing Vibration monitoring and spectrum analysis of Rotating equipment by using data collector & analyzer (SKF Microlog CMVA60) and data manager (SKF PRISM4 1.35 / SKF Machine Analyst 2.2)

Process Engineer with 19 years experience on which 12 years of Project Engineering, and Commissioning in international team environment.

First 1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out