Resume - Experience in Mechanical Engineering Design, skilled in detailed design of pipin...

Misco Jobs

Resume #71559

CONTACT INFORMATION:
View contact information...

CAREER SUMMARY:
Experience in Mechanical Engineering Design, skilled in detailed design of piping system for Petrochemical plants, Power Plants, Oil & Gas project. Also knowledgeable in 3D modelling using PDMS, Autocad Inventor 2008 with reference to JIS, ANSI, and ASME. Detail Design of Pressure Vessel based on ASME VIII Division I. Detail Design of Process Piping on Manufaturing Process plant & Petrochemical Plant. Accumulated 2 years of experience as Test Sustaining Process/Product Engineer in the field of semiconductor testing and 2 years is Surface Mount Technology (SMT). Acquired with these exposures considerable experience and skill in equipment PM/Calibration, set-up, maintenance, product evaluation, Test process development and prevention of future machine failure and a comprehensive understanding of SMT Assembly Methodology and Striptest Methodology. Attained valuable knowledge, techniques through experience, seminars, technical trainings and workshops.

OBJECTIVE: To explore a greater opportunity in Mechanical Engineering
Design and to apply my knowledge and skills in Piping Design using
PDMS, AutoCad and other softwares. To be able to gain more extensive knowledge and skills that will be utilized to the fullest leading to the firm's stronger foundation and notable growth.

MECFLOU PTE LTD
33 TUAS VIEW CRESCENT SINGAPORE
DESIGN EGINEER Nov.07, 2007 to Present
Design Department

Job Description:
* Detail Design of Process Piping on Manufaturing Process plant & Petrochemical Plant.
* Detail Design of Pressure Vessel based on ASME VIII Division I.
* Generate Detailed Pressure Vessel, Tanks drawing for fabrication.
* Prepare Material Take-off, BOM and Isometric drawings.
* Monitor and ensure that works are carried out according to specifications, quality plan and safety standards.
* Handle all project preliminaries such as site inspection, quotations, measurements, and all other necessary preliminary groundwork and sample submission.
* Prepare Tender Documents, Monitor, track and report project progress.
* Source for suppliers and materials to get best quotes for purpose of submission and cost control.
* Co-ordinate site work involving main contractors, subcontractors and our own co-workers.
* Generate shop detailed drawing for piping material purchasing and installation.
* Generate and update P&ID, Isometric piping drawing.
* Record all correspondence/paperwork properly and thoroughly for all projects under your my responsibility.
* Provide Technical support Designing, Administration, Quotations, Tenders & purchasing.
* Coordinate with supervisors and managers in all technical areas of concern under my area of responsibility.

DELUGE FIRE PROTECTION (S.E.A.) PTE LTD.
3 JOO KOON CRESCENT SINGAPORE 629008
PIPING DESIGNER May 03, 2007 to Nov.07, 2007
Design Department

Job Description:
* Detail Design of Fire Protection Piping on Petrochemical plant.
* Modify ISO drawings extracted from PDMS Model and update ISO drawings based on new revised P&ID.
* Prepare Material Take-off and Isometric drawings.
* Modify Isometric drawings according to clients' specifications, Singapore Standards for installation and servicing of Fire Protection System which includes Fire Alarm System,
Sprinkler System,
* Generate shop detailed drawing for piping material purchasing and installation.
* Coordinate with the main contractor for any design revision.
* On assignment to the field, supports construction in drawing and specification interpretations, design modifications, scheduling, system checkout and testing.
* Currently assigned in an Oil & Gas project in Jurong Island responsible for Design modification and revision of ISO drawings.

ISHIKAWAJIMA-HARIMA HEAVY INDUSTRIES PHILIPPINES INC.
1101 West Tower PSE Centre, Ortigas, Ortigas Centre,
Pasig City, Philippines
Design Engineer August 16, 2006 to April 16, 2007
Piping Group Mechanical Engineering Department

Job Description:
* Design and Adjustment of Pipe supports on 3D Model using PDMS based on Stress
Analysis Report (Auto Pipe).
* Details Piping Support drawing using AutoCAD (2D drawing) issue for Fabrication.
* Modifies ISO drawings according to client's specifications and standards.
* Prepare Piping Isometric drawing and Material take-off.
* Modify isometric drawings of the pipe support and pipe rack assembly.
* Evaluate and Analysed design system of pipe installation as well as the use of proper piping supports.
* Modify designs with reference to the JIS, ASME and ANSI codes as per customers
* Check and review the Piping Layouts, Isometrics drawings based on P&ID, GA Drawings,
Equipment Lay-out requirement.

MAJOR WORKS UNDERTAKEN
PROJECT NAME PROJECT ACTIVITY COUNTRY
NCP Power Plant Piping Support Detail Design Japan
Blue Waters Power Plant Piping Stress Analysis, P&ID Review, Australia
Pipe Support 3D Modelling using PDMS
Okinawa LNG Plant Plant Design Modelling by PDMS Japan
Maizuru Power Plant Project Boiler Air Duct Detail Design Japan

AMKOR TECHNOLOGY PHILIPPINES (ATP)
KM. 22, East Service Road, South Superhighway,
Muntinlupa City, Philippines
Equipment Engineer January 16, 2005 to August 16, 2006
Striptest Department

Job Description:
* Generate frequent machine error handling procedure as containment while working on permanent corrective action on identified frequent machine error that impact on quality and robustly implement Equipment handling procedure.
* Assigned as Project leader in Quality focus team where our objectives is to eliminate and minimize machine related problems that has impact on quality.
* Conduct scheduled Preventive Maintenance, and Machine Set-up to ensure less downtime and improve machine efficiency.
* Maintain Equipment uptime, efficiency and equipment reliability and maintainability.
* Provide equipment technical analysis during equipment breakdown and provide recommendation for non- reoccurrence of the problem.
* Ensures attainment of the stations optimum yield capacity, high product quality and reliability, as well as machine utilization efficiency.

Process Engineer June 14, 2004 to January 16, 2005
Striptest Department

Job Description:
* Assess top mark capability of striptest current machine set-up and conduct striptest process capability on top mark of smaller package. Conduct Gage repeatability
& producibility evaluation for top mark of TSSOP package.
* Provide detailed set-up conversion procedure, (RCA) root cause analysis on frequent machine errors that impact on quality.
* Eliminate production Non-Value Added activities to improve customer cycle time and minimize production indices as well as improving our OTD to the customer.
* Provide permanent fixes in all final test areas that need improvements to continue support production goals and commitments.
* Provided resolution on Laser Marking quality problem (Deep Mark) on MCT Handlers for products with Top Mark requirement providing the following impact:
(1) Non-Value-Added Activity reduction by 6.25%
(2) Gaining $ 6383.68 on parts productivity
* Responsible for providing technical support and guidance on product and process implementation and analysis to ensure conformance of the test process to set specifications.
* Interfaces with external and internal customers regarding equipment problems, yields, productivity, quality and reliability concerns and recommends and implements corrective actions to eliminate re-occurrence.
* Real time assistance on all manufacturing dispositions regarding low yields, test set-ups, marking integrity, QA failing lots.
* Generate test process controls that will ensure quality of tested products, includes FMEA, Out-of-Control Activity Plan, Striptest control plan, MRB, Low yield report, Striptest operating procedure, Test FAI, Equipment set-up checklist.

ELECTRONIC ASSEMBLIES INC. (EAI) Sept. 24, 1997 to June 18, 1999
Lot 2 Blk. 1 St., Blossoms Estate Compound
Laguna International Industrial Park (LIIP)
Barangay Mamplasan / Ganado, Biñan Laguna
SMT Line Maintenance Technician
SMT Department

Job Description:
* Responsible for providing Design and jig and fixtures design innovation for the improvement of the process output.
* Responsible for Program optimization as per customer's specification.
* Maintain Equipment up time through process, productivity and yield improvement.
* Conduct Line Corrective Maintenance, Preventive Maintenance, and Machine Set-up to ensure less downtime and improve machine efficiency.
* Maintain Equipment uptime, efficiency and equipment reliability and maintainability.

PHILIPPINE TONAN CORPORATION January 03 1997 to July 1997
Mactan Export Processing Zone Lapu-Lapu City, Cebu
Injection Molding Operator/ Technician
Injection Molding Department

Job Description:
* Responsible for set-up optimization before full production of injection molding machine.
* Maintain Optimum production efficiency and productivity.
* Conduct Line Corrective Maintenance, Preventive Maintenance, and Machine Set-up to ensure less downtime and improve machine efficiency.

EDUCATIONAL ATTAINMENT:
1999 –2003 Bachelor of Science in Mechanical Engineering
Technological University of the Philippines- Visayas
Talisay City, Negros Occidental, Philippines

1994 –1997 Mechanical Engineering Technology (Diploma)
Technological University of the Philippines- Visayas
Talisay City, Negros Occidental, Philippines
1990 –1994 Secondary
University of St. La Salle – Bacolod
La Salle Ave. Bacolod City, Philippines
1984 –1990 Elementary
University of St. La Salle – Bacolod
La Salle Ave. Bacolod City, Philippines

PROFESSIONAL LICENSE: Registered Mechanical Engineer
License Number: 0062592
Registration Date: September 11, 2003

Engineering Affiliate: Member, Philippine Society of Mechanical Engineer
Metro Manila Chapter (October 2003 – Present)

OTHER SKILLS:
* Proficient knowledge in the following Design Software:
1. AutoCAD 2000, 2002, 2004, 2008
2. Autocad Inventor 2008
3.PDMS (PLANT DESIGN MANAGEMENT SYSTEM) Software Version 11.5.
4.Auto pipe Software
5.Solid Works 2003
* Has a strong Mechanical Drawing comprehension.
* Can maintain and operate Lathe, Milling, Grinding machines and other Machine Shop
Fabrication equipment, Striptest tester and Handlers.
* Has a strong Knowledge in Machine tools and equipment.

TRAININGS/ SEMINARS:
* Autocad Inventor 2008 Advance Training
April 25, 2008) Conducted by INNOCOM Technologies Pte Ltd (Singapore)
* Pressure Vessel s and Piping – Analysis and Design
February 27 to February 29, 2008) Conducted by Nangyang Technological University
(Singapore)
* Technical Training Course of PDMS (Plant Design Management System)
(August 14 to September 29, 2006) Conducted by IHI Philippines.
* Failure Analysis Conducted by Amkor Technology Philippines.
* Effective Communication and Meeting by Amkor Technology Philippines.
* DOE Conducted by Amkor Technology Philippines.
* Effective Communications & Meetings.
Conducted by Amkor Technology Philippines.
* ISO 9000 Conducted by EAI.
* RCA (Root Cause Analysis) Conducted by Amkor Technology Philippines.
* 8D Conducted by Amkor Technology Philippines.
* SPC Conducted by EAI.
* TPM Conducted by EAI.
* Introduction to SMT Conducted by EAI.
* LEVEL 4 Operation and Maintenance Training Program (FUJI CP642)
Conducted by FUJI MACHINES PHILS. Inc.
* Symposium on Pneumatic Control Technology
Conducted by FESTO PHILS. Inc.

PERSONAL BACKGROUND:
Place of Birth: Talisay City, Negros Occidental, Philippines
Date of Birth: February 10, 1977
Civil Status: Single
Citizenship: Filipino
Height: 165cm.
Weight: 65 kgs.
Sex: Male
Language/dialect spoken: English, Tagalog, Illonggo, Basic Nihonggo
Passport #: mm 328999
Notice Period: 1 Month after notice
Residential Status: S-PASS Holder in Singapore

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2951 to 3000 of 6411)

Go to Search Parameters...

Brief Description

Senior Planner / Scheduler

Master of Science in Chemical and Process Engineering

For Programmer five of Programmer with my specification in VB, ASP, PHP. For Analyst fourth of Analisys systems with Data Oriented and OOA and UML Lecturer so one of Lecturer spesification AI, Neural network and OOP

Lab Technician MSc Organic Chemistry Karachi University 2004 & Computer Literate MS Office-97

QC Inspector-Multi-discipline / on Various oil& gas Projects

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

QC/Welding Engineer/ASNT NDT Level III

M.Sc. in mechanical engineer / planning engineer in oil company for more than 3 years & Head of mechanical engineering department in Faculty of petroluem technologies for 2 years

Piping Design Engineer

Pipeline Engineer with strong basic pipeline engineering background and capable using pipeline engineering software such as Offpipe, Abaqus, Orcaflex, AutoPipe, PlusOne, Ceasar, and Catia. All pipeline design/ analysis accordance to DNV, API and ASME standard.

Seeking a suitable position in Oil & Gas field operations

I have completed my B Tech in instrumentation from calicut university ( India) with an aggragate of 72.7%. I have got experience in FACT, a leading fertilizer company where i got chance to familiarize with DCS(YokogawaCS100,HoneywellTDC300),PLC(AllenBradly,Omron) and got experience feild instruments

Auto Cad map Arc GIS 9.1 Software Quality Testing Hardware & Networking Operating System: NT, Windows 2000, XP, Linux, Unix Language Known: C , C++ GUI Front End: VB 6.0 Web technologies: HTML, JAVA Script Database Known: Oracle

Very dedicated and hard worker who will not walk away from a challenge.

Chemical Engineering graduate from A.A.M. Engineering College , Thiruvarur under Anna University Tamilnadu. With the qualification mentioned in the resume, I am confident that I can undertake and discharge successfully my duties in your organization.

Electronics and Instrumentation Engineer, Certified Automation Engineer with one year related experience.

Work Experiences

B-tech Mechanical and Post Graduate Diploma in CAD/CAM , now Pro-e piping and RSD .

Senior Marine Facilities Engineer, Highest qualification: B.Sc (Eng) Civil, University of Cape Town, 1989, Overall working experience 16years, specializing in Marine Terminals, Harbor and Coastal Structures, Oil & Gas Development and Port Infrastructure Projects.

Seeking assignments in Production, Operations/ Process Enhancement in Chemical Engineering Domain with an organisation of repute.

Instrument designer+PDS+INtools

I am a petroleum engineer. I want to find a job

Purchasing Officer possesses Product costing, Price negotiation, Suppliers sourcing skills and Demonstrate ability to read blue print design and evaluate and testing of quality product.

Subject: Apply for a job.

10 YEARS EXPERIENCE IN PROJECT DESIGN , ERECTION & COMMISSIONING AND MAINTENACE OF PETROCHEMICAL AND REFINERY PLANTS. MAIN AREA OF CONCERNS : HONEYWELL TDC 3000 DCS , FOXBORO I/A SERIES SYSTEM

More than 10 yrs in Oman & India activities are directly related to QA/QC/inspection during design, procurement and construction of various projects. Fertilizer , Refinery, Petrochemicals, Power Plant, Acid Plant, Pipeline, Production/Shipping Stations & Oil Field

To provide significant contributions in software engineering leadership and technical solutions by performing all software processes and management tasks in an environment using new technologies with a team-oriented group.

I am seeking the position of MWD Engineer/Supervisor/Consultant/ Independent Coordinator.

Technical Support

To obtain a full time position in Chemical Engineering beginning in the fall of 2002.

I am a maintenance Team leader for all trade in the chemical plant. I have over 15 years instrumentation experience. 3 Years management experience.

Sandra H Evans. A Geology graduate with a first class honours Geology degree and an MSc in Basin Evolution and Dynamics. I have experience using seismic interpretation software such as Schlumberger IESX Geoquest, Geovis, the Kingdom Suite and ERMapper. I also have some research experience.

The scope of my work concerns Pressure Transient Analysis, Well Test Design, Reservoir Simulation, Multiphase Testing, Optimising Perforations in weak unconsolidated formations and designing artificial lift mechanisms.

To obtain an entry level engineering position that promotes continuous educational and professional development while solving hands on and theoretical problems

I am seeking the position of MWD/LWD Engineer/Supervisor/Consultant. I have 7 years exp. as MWD Engineer prior to maintenance of the MWD Systems.

B.ENG. MECHANICAL ENGINEERING (SECOND CLASS UPPER DIVISION)

I am a Civil Engg.( Diploma ) with 13 years of experience in pipe line (Sewerage and Drainage ),Buildings at various positions. I can assure you to deliver the best from me.

Petroleum Engineer with over 6+ years of International experience in Reservoir Simulation, Drilling Engineering, Well Log Interpretation, Well Test Analysis and Project Management. He is a proven Engineering and Technical Communicator.

I have over 10 years of North Sea drilling experience. I have attended many oil company-planning meetings for my current employer and have been the point of contact for various projects in the last 3 years. This has increased my interest in project planning & implementation,

Petroleum Engineer with 10 years experience, some legal and accounting skills, contract negotiation as well. Will consider any position, including entry level as I have been out of the oil business for some time. Will also consider any location.

System Design for power systems, Project Management, Basic PLC programing, Netwroking

Experience in Mechanical Engineering Design, skilled in detailed design of piping system for Petrochemical plants, Power Plants, Oil & Gas project. Also knowledgeable in 3D modelling using PDMS, Autocad Inventor 2008 with reference to JIS, ANSI, and ASME. Detail Design of Pressure Vessel.

Experience with service and repair of Electrical Panels and Equipments, electrical testing and various machine controls like PLC and AC drives. Good knowledge of PLC programming ( ladder diagrams), technical drawing and implementation.

Now I'm working in Rashid Petroleum Co. as a Subsea Engineer

4 yr degree in Metallurgy + 2yrs eperience in an integrated steel plant , good at Analytical skill

Diploma in Mechanical Engineering with 8 years Experience in Mechnical Maintenance(Rotary and Static equipments )at Oil and Gas fields

I bring with me a Bachelor of Science degree in Earth and Environmental Science - major in Geology along with nearly five years of experience with Geologic Interpretation and Technical Support. I also have an applied degree in Petroleum engineering from SAIT with a little experience in reservoir eng

12 Years on offshore industry working with subsea installation of equipments (manifolds, suction piles, PLETS etc) and flexible lines in shallow and ultra-deepwater; subsea connections; pull-ins; remote and dive assisted interventions; inspections, maintenance and subsea repairs; stand alone equip

Good technical skills, Like to work with computers, Internet, Driving license category B.

Working as Petroleum Engineer since 17 years. Engineer, Supervisor and Manager roles in drilling, wellcompletion, production and workover operations in oil and gas E& P .

First Prev 51 52 53 54 55 56 57 58 59 [ 60 ] 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out